Programmable Universal Input Chart Recorder with Digital Display

100 and 180 mm Programmable Chart Recorders

5,0

(1)

100 and 180 mm Programmable Chart Recorders

Cliquez et maintenez pour zoomer

Fiche technique (PDF)

C$14,186.04

Article# RD1824B/C3

Remises de volume disponibles

Calendrier de remise sur volume

Quantité	Prix unitaire
1-4	C$14,186.04
5-9	C$13,476.74
10-24	C$13,193.02
25-49	C$12,625.58
50-99	C$12,341.85
100+	C$12,058.13

Qté

Ajouté à votre panier

En stock

Délai de livraison (si pas en stock): 8 semaines

Ajouter à la liste des projets

This series has been discontinued, for a potential replacement see RD5100-Series.

Digital and Bar Graph Display
1, 2, 3, 4 Continuous Pens or 6-Point Dot Printing Models (RD1800B Also Has 12, 18, 24 Dot Printing)
Universal Inputs: Thermocouple, RTD, Voltage
Programmable Input Types, Full Scale Ranges, Alarms, Chart Speed

Voir Spécs

RD1824B/C3 Options de modèles

Voir tous les modèles

Modifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.

*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.

Number of Channels

Measurement Type

Chart Time

Number of Alarm Relays

Additional Features

Measurement Range

Specs

Modifier les options du modèles

The RD100B 100 mm (4") and RD1800B 180 mm (7") Series programmable chart recorders are easy to use. They feature universal thermocouple, RTD, and DC voltage (mV or V) inputs, as well as an analog bar graph and a digital display.
Each recorder can print out—at programmed intervals or on demand—the date and time, channel number, scale marking, tag number, proper engineering units, chart speed, alarm value, and complete program list.
The non-contact, ultrasonic pen-position transducer is more accurate than standard pen mechanisms. The wear-free, brushless DC servo-motor eliminates the need for motor brushes, lead wire, and connectors, and is directly mounted to the printed circuit board. These 2 features contribute to the long, trouble-free life of these recorders.
Optional Communication Output The optional RS422A/485 or Ethernet interface lets the user connect up to 32 units on a multidrop line to a single host computer for data logging or input/output of any setup parameter.
Versatile Alarm and Remote Control Functions (Optional)
The user can select up to 4 of the following 6 alarm types: high/low limit, deviation high/low limit, rate of change high/low. Optional alarm relay contact outputs are front-panel selectable. Also included is a remote control feature, which lets the user select any 5 of the following functions through the front keypad: recording start/stop chart speed change manual printout start message printout start (up to 5 user-defined messages).

All Models