Appelez-nous au 1-888-826-6342
Humidity/Temperature Transmitters
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- Fast, Stable and Accurate
- Watertight Enclosure
- Compact, Easy to Use
- Excellent Long-Term Stability
HX302AC Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Input Type
Input Ranges
Output Type
Display Type
Supply Voltage Type
The HX300 Series Transmitter is designed for industrial environments requiring fast, stable and accurate measurements. It utilizes a highly stable thin film polymer capacitor to sense relative humidity, and a high accuracy thin film RTD to accurately sense temperature.
Rated 5 out of
5
by
Aleksandar from
Great Job
Quick response and right product information's !!!
Date published: 2023-09-11
Rated 5 out of
5
by
R Clark from
Omega Retro Fit Humidity Probe
Great experience with customer service. Was able to get a direct replacement probe.
Date published: 2023-08-30
Rated 3 out of
5
by
Vincent N from
Very tight Output Termination.
Wish the output terminal was inverted so there is more room to terminate wiring.
Date published: 2023-04-04
Rated 5 out of
5
by
Who dat from
Great product.
Very easy to set up! Also very reliable. Will purchase again.
Date published: 2022-01-01
Rated 4 out of
5
by
Nate from
Good product
I have bought several of these units over the years and have always had good results With them.
Date published: 2018-04-29
RoHS 2015/863 - Voir le certificat
Approuvé CE
Are these compatible in a corrosive environment?
Thank you for the inquiry. No, these are not compatible in a corrosive environment.
Date published: 2023-08-28
Are these designed to be installed in a bulkhead or throughpanel configuration? If so what is the recommended method for accomplishing this?
Hi TimMcMan,
Thank you for the inquiry. The HX302C is designed for mounting on a wall. Manual supplies detail including mounting hole location.
Best regards
OMEGA
Date published: 2022-12-05
Is there a more extensive manual for the HX303AV model? This a jumper on it to change the output range to 0 to 5V but that is not mentioned in the online manual. I'm seeing 0.4V for ambient temp reading and 0.9V for RH. Seems wrong?
Thank you for the inquiry. Manual for the HX303A; https://assets.omega.com/manuals/M5072.pdf. For more trouble shooting assistance please forward email to TEMP@OMEGA.COM.
Best regards
OMEGA
Date published: 2023-06-18
the data that I am getting to my PLC is not coming through as a percentage but rather a 4 digit number. Is there a formula that I need to apply to the data to get the information that I need? I doubt 2894 is the correct RH. Any help is greatly appreciated
Hi James,
You'll need to check the PLC scaling and adjust as needed. The 4 to 20 mA outputs of the HX303AC are scaled to represent 0 to 100 % RH and 0 to 100 C.
Best regards
OMEGA
Date published: 2023-03-01
Power Supplies