Appelez-nous au 1-888-826-6342
Capteurs de force en « S » entièrement en acier inoxydable
500 lbf, ±0.03%, Linearity, 3 mV/V Output, Cable
Remises de volume disponibles
Calendrier de remise sur volume
| Quantité | Prix unitaire |
|---|---|
| 1-9 | C$687.14 |
| 10-24 | C$652.78 |
| 25-49 | C$639.04 |
| 50-99 | C$611.55 |
| 100+ | C$597.81 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- Construction entièrement en acier inoxydable pour les applications industrielles difficiles
- Interchangeabilité de 0,25 % pour les applications à plusieurs capteurs de force
- Étalonnage à 5 points fourni (en tension)
LC101-500 Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Weight Capacity
Height
Width
Length
Connection Type
Cable Length
Measurement Units
Force direction
Linearity
Electrical Output (nominal)
Description
Comment fonctionnent les capteurs de forceTension/Compression 0-25 lb à 0-40 000 lb 0-10 kgf à 0-10 000 kgf
CARACTÉRISTIQUES
Excitation : 10 Vcc, 15 Vcc max.
Sortie : 3 mV/V ±0,0075 mV/V
Linéarité : ±0,03 % de sortie pleine échelle (0,1 % 40 K)
Hystérésis : ±0,02 % de sortie pleine échelle (0,1 % 40 K)
Répétabilité : ±0,01 % de sortie pleine échelle (0,05 % 40 K)
Équilibrage de zéro : ±1 % de sortie pleine échelle
Plage de température de fonctionnement : -40 à 93 °C (-40 à 200 °F)
Plage de température compensée : 17 à 71 °C (60 à 160 °F)
Effets thermiques :
Zéro : 0,002 % de sortie pleine
échelle par °C
Étendue : 0,002 % de sortie
pleine échelle par °C
Surcharge admissible : 150 % de la capacité
Surcharge ultime : 300 % de la capacité
Résistance d'entrée : 350 ±10 ?
Résistance de sortie : 350 ±10 ?
Déflection de pleine échelle : 0,010 à 0,020"
Construction : acier inoxydable 17-4 PH
Raccordement électrique (LC101/LCM101) (câble blindé 4 conducteurs) :
<100 kgf/250 lb : 9 m (30') 24 AWG
250 à 1 000 kgf/250 à 2 000 lb : 9 m (30') 20 AWG
=1 500 kgf/3 000 lb : 4,5 m (15') 20 AWG
Connecteur apparié (LC111/LCM111) :
?100 kgf/200 lb: PT06F8-4S,
vendu séparément
=250 kgf/250 lb : PT06F10-6S,
vendu séparément
Rated 5 out of
5
by
wolf460 from
The S beam load cell
I received my load cell several weeks ago and it is well worth the value. The accuracy, durability, and workmanship are outstanding.
Date published: 2017-02-13
Rated 5 out of
5
by
Tester from
Great load cell, when it is available in time.
We have several of these in our product test lab, and they work great, just as described. They are accurate. We excite them with an Omron 12V power supply and feed the signal into a National Instrument C Series analog input module. My only gripe is lead time. We have had to choose a less-than-optimal load range and the hard-wired cord instead of the bayonet lug because the one we wanted was 4, 8 or 12 weeks lead time. I wish it didn't take so long to get a catalog item.
Date published: 2019-02-28
Rated 5 out of
5
by
Larry Legend from
This works great for our application.
This unit will last us approximately one year and gets used constantly on a daily basis.
Date published: 2017-03-13
Rated 5 out of
5
by
Anonymous from
Omega Load Cell review
Great product, we use these units in multiple test locations and they stand up to harsh environments.
Date published: 2022-01-04
Rated 5 out of
5
by
Felix83 from
Awesome service
The service is exceptional. Got my item as expected and on time.
Date published: 2017-01-26
Is this load cell susceptible to high vibration? I am running a test that sees significant vibration for 24 hours or longer and the last load cell that I had stopped working. The load was consistent between 2000-2050 LBS and the load cell stopped working.
The short answer is yes.
Load cells have a difficult time because of their construction .
The wires can break and the connection would be lost.
Also theirs the issue of overloading.
Please contact us to discuss with are engineers of a possible solution.
Date published: 2021-06-16
What is a minimum load for a LC101-250 load cell?
Thank you for your inquiry, the LC101-250 is an analog device that should respond to any change it sees.
Date published: 2022-02-18
what is the frequency response of the load cells? Can they be used to measure dynamic (variable in time at high frequency) loads?
Thank you for contacting Omega. The load cells we carry are not intended for high frequency measurements. Typically they are good for measurements up to about 100 Hz.
Date published: 2019-10-01
I wanted to know what is a compatible amplifier that we can use with this load cell, LC101-50?
Thank you for your inquire
We have a variety of amps available a few models are DMD466,DMD4059 & DMD465
Date published: 2021-09-13
Can the top and bottom rest against a surface or does the load cell need to be off set with rod ends?
Tank you for your question?
The load cell works best with rod ends or a load button.
The cell will still work if you measure the load with the top and bottom
Date published: 2019-06-27
S-Beam Load Cell - Stainless Steel Construction, High Accuracy, Economical Price
C$33.00
27 In Stock
S-Beam Load Cell - Stainless Steel Construction, High Accuracy, Economical Price
C$66.00
5 In Stock
S-Beam Load Cell - Stainless Steel Construction, High Accuracy, Economical Price
C$327.18
3 In Stock
Accessories
15 foot 4 wire cable assembly for LC111 ranges =200 lb (not included)
C$182.15
1 In Stock
Accessories & Compatible Meters
Accessories - Compatible Panel Meters and Signal Conditioners
1/8 DIN 4-digit DPiS strain gage meter with 90-240 Vac/dc power. Please see DP25B-S for pricing and availability of full range of DP25B-S meters. Use Part Number Builder to see all options.
C$538.97
22 In Stock