Appelez-nous au 1-888-826-6342
Brass or Monel Inline Duct Heater up to 565°F and 5 kW Power
Air Duct Heaters for Round Ductwork with Metal Enclosure
Remises de volume disponibles
Calendrier de remise sur volume
| Quantité | Prix unitaire |
|---|---|
| 1-4 | C$2,811.40 |
| 5-9 | C$2,670.83 |
| 10-24 | C$2,614.60 |
| 25-49 | C$2,502.15 |
| 50-99 | C$2,445.92 |
| 100+ | C$2,389.69 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
DAB-30M/240V Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Maximum Outlet Air Temperature
Power
Power Density
Mounting Size
Sheath Material
Supply Voltage
Mounting Style
FEATURES
Easy installation in round duct. The DAB Series is a coiled finned element complete with sheet metal enclosure. Flange permits easy gauging of units to augment heating capacity.
Air is forced over elements only. The center openings of all DAB units may be enclosed with a sheet metal baffle furnished with the unit. When a number of units are interconnected, the center opening of just the first and last heater in the series are closed.
Controls. For thermostatic control (AR thermostat) and overheat protection (Type ARC), see Controls Section P.
Alloy wire or bus bar should be used for power connections. (See Section Q) Mounting gaskets are supplied with each heater to minimize air leakage between the heater and mounting surface or between heaters. Gasket material is non-asbestos.
CAUTION AND WARNING!
Fire and electrical shock may result if products are used improperly or installed or used by non-qualified personnel. See inside back cover for additional warnings.
![]()
Easy installation in round duct. The DAB Series is a coiled finned element complete with sheet metal enclosure. Flange permits easy gauging of units to augment heating capacity.
Air is forced over elements only. The center openings of all DAB units may be enclosed with a sheet metal baffle furnished with the unit. When a number of units are interconnected, the center opening of just the first and last heater in the series are closed.
Controls. For thermostatic control (AR thermostat) and overheat protection (Type ARC), see Controls Section P.
Alloy wire or bus bar should be used for power connections. (See Section Q) Mounting gaskets are supplied with each heater to minimize air leakage between the heater and mounting surface or between heaters. Gasket material is non-asbestos.
CAUTION AND WARNING!
Fire and electrical shock may result if products are used improperly or installed or used by non-qualified personnel. See inside back cover for additional warnings.
| Watts | W/In2 | Volts | Dimensions cm (in) | Model No. | Wt. (lb) | |
| A | B | |||||
| DAB Series — Rust-Resistant Iron Sheath | ||||||
| 2500 | 27 | 240 | 31.0 (12 3/16) | 16.7 (6 9/16) | DAB-30 | 6 |
| 3000 | 27 | 240 | 35.4 (13 15/16) | 21.1 (8 5/16) | DAB-36 | 10 |
| 4000 | 25 | 240 | 44.9 (17 11/16) | 30.6 (12 1/16) | DAB-48 | 14 |
| 5000 | 27 | 240 | 50.0 (19 11/16) | 35.7 (14 1/16) | DAB-54 | 16 |
| DAB Series — Monel Sheath | ||||||
| 2500 | 27 | 240 | 31.0 (12 3/16) | 16.7 (6 9/16) | DAB-30 | 6 |
| 3000 | 27 | 240 | 35.4 (13 15/16) | 21.1 (8 5/16) | DAB-36 | 10 |
| 4000 | 25 | 240 | 44.9 (17 11/16) | 30.6 (12 1/16) | DAB-48 | 14 |
| 5000 | 27 | 240 | 50.0 (19 11/16) | 35.7 (14 1/16) | DAB-54 | 16 |
