These heaters are used in enclosures wherecondensation is to be prevented or thetemperature may not fall below a minimumvalue. In this way corrosion is avoided andan even temperature is ensured. The heatersare designed for permanent operation.
SPECIFICATIONS Operating Voltage: 120 to 240 Vac/Vdc* (min 110V, max 265V) Heating Element: PTC resistor: temperature limiting Surface Temperature: <85°C (185°F), (according to VDE 0100), except upper protective grille Connection: 2-pole terminal 2.5 mm2 (0.1"), torque 0.8 Nm max Casing: Plastic according to UL94 V-0, black Dimensions: 98 x 38 x 75 mm (3.9 x 1.5 x 3.0") Mounting: Clip for 35 mm (1.4") DIN rail, EN 50022 Fitting Position: Vertical Operating/Storage Temperature: -45 to 70°C (-49 to 158°F) Protection Type/Protection Class: NEMA 2 (IP20)/II (double insulated) Approvals: VDE + UL File No. E150057 (according to UL499 in combination with UL508A) Note: Other voltages on request * Operating with voltages below140 Vac/Vdc reduces heatingperformance by approximately 10%.
Rated 3 out of
Product is not as advertised, no thermostatI specifically purchased this item because both the title and the description (copied below) said the device came with a thermostat. When I received the item, there was no thermostat nor "built in" adjustable thermostat. When I wrote to the company about this omission they tried to explain it away as something non-adjustable and instead referenced me back to their website to buy an additional thermostat. I went to the hardware store instead and bought a line voltage tstat instead of going back to them and trusting they would sell me the right thermostat. If you buy this product under the assumption that you have the ability to set the temp range you want it to control to, my advice is to keep looking.
TITLE: Touch-Safe Mini Enclosure Heater with Thermostat 10W, 20W. DESCRIPTION: The Touch-Safe Enclosure Heater is offered as 10 and 20W and has a low surface temperature due to its double insulated construction, and a built-in thermostat.