Appelez-nous au 1-888-826-6342
Steel Immersion Heater 2" NPT Light Weight Oil Thermostat
Lightweight Oil Immersion Heater with Integral Thermostat—2" NPT Steel Fitting
Remises de volume disponibles
Calendrier de remise sur volume
Quantité | Prix unitaire |
---|---|
1-4 | C$3,493.60 |
5-9 | C$3,318.92 |
10-24 | C$3,249.05 |
25-49 | C$3,109.30 |
50-99 | C$3,039.43 |
100+ | C$2,969.56 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- Built-In Thermostat— Three Temperature Ranges Available
- 1.5 to 6 KW
- 120, 208 240 or 480 V, 1 Phase
- Rugged, 2 Element Design
ARMTO-2605T2/480V Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Heating Element Length
Power
Power Density
Supply Voltage
Enclosure Type
Maximum Operating Temperature
Minimum Operating Temperature
Form Factor
Connection Type
Supply Voltage Type
Heated Medium
Sheath Material
Features
Please Note: The integral thermostat functions as a temperature control only. This is not a fail safe device. An approved pressure and/or temperature limit control should be used with these heaters to assure safe operation. See the Temperature section for our selection of control devices.
/*Designate voltage, i.e., insert 120 for 120 Vac, 208 for 208 Vac, 240 for 240 Vac, or 480 for 480 Vac.
/** Designate voltage, ie., insert 208 for 208 Vac, 240 for 240 Vac, or 480 for 480 Vac.
†Heaters with Temperature Ranges 200-550°F are not UL listed.
Caution: Explosion resistant type E2 construction refers to heater design features which provide explosion resisting containment of electrical wiring according to National Electric Code. Abnormal application or use of heaters which results in excessive temperatures can create hazardous conditions which can lead to fire
Consult Section Z for data on allowable watt densities for more viscous materials.
kW | W/in2 | No. Htg. Elem. | Dim.B in(cm) | †Temp.Range 200-550°F Model No. | Temp.Range 60-250°F Model No. | Temp.Range 0-100°F Model No. | ||
ARMTO- 2 Series with General Purpose Enclosure | ||||||||
1.5 | 24 | 2 | 11¾ (30) | ARMTO-2155/* | ARMTO-2155T2/* | ARMTO-2155T1/* | ||
2 | 24 | 2 | 17¾ (45) | ARMTO-2205/* | ARMTO-2205T2/* | ARMTO-2205T1/* | ||
2.5 | 26 | 2 | 19 5/8 (50) | ARMTO-2255/* | ARMTO-2255T2/* | ARMTO-2255T1/* | ||
3 | 23 | 2 | 24 7/8 (63) | ARMTO-2305/* | ARMTO-2305T2/* | ARMTO-2305T1/* | ||
4 | 23 | 2 | 32¾ (83) | ARMTO-2405/* | ARMTO-2405T2/* | ARMTO-2405T1/* | ||
5 | 23 | 2 | 40¼ (102) | ARMTO-2505/* | ARMTO-2505T2/* | ARMTO-2505T1/* | ||
6 | 23 | 2 | 47¾ (121) | ARMTO-2605/** | ARMTO-2605T2/** | ARMTO-2605T1/** | ||
ARMTO-2 Series with Moisture Resistant/Explosion Resistant Enclosure | ||||||||
1.5 | 24 | 2 | 1¾ (30) | ARMTO-2155E2/* | ARMTO-2155E2T2/* | ARMTO-2155E2T1/* | ||
2 | 24 | 2 | 17¾ (45) | ARMTO-2205E2/* | ARMTO-2205E2T2/* | ARMTO-2205E2T1/* | ||
2.5 | 26 | 2 | 19 5/8 (50) | ARMTO-2255E2/* | ARMTO-2255E2T2/* | ARMTO-2255E2T1/* | ||
3 | 23 | 2 | 24 7/8 (63) | ARMTO-2305E2/* | ARMTO-2305E2T2/* | ARMTO-2305E2T1/* | ||
4 | 23 | 2 | 32¾ (83) | ARMTO-2405E2/* | ARMTO-2405E2T2/* | ARMTO-2405E2T1/* | ||
5 | 23 | 2 | 40¼ (102) | ARMTO-2505E2/* | ARMTO-2505E2T2/* | ARMTO-2505E2T1/* | ||
6 | 23 | 2 | 47¾ (121) | ARMTO-2605E2/** | ARMTO-2605E2T2/** | ARMTO-2605E2T1/** |
/** Designate voltage, ie., insert 208 for 208 Vac, 240 for 240 Vac, or 480 for 480 Vac.
†Heaters with Temperature Ranges 200-550°F are not UL listed.
Caution: Explosion resistant type E2 construction refers to heater design features which provide explosion resisting containment of electrical wiring according to National Electric Code. Abnormal application or use of heaters which results in excessive temperatures can create hazardous conditions which can lead to fire
Consult Section Z for data on allowable watt densities for more viscous materials.