Appelez-nous au 1-888-826-6342
Incoloy Deep Tank Immersion Heater Flanged
Deep Tank/Sump Immersion Heaters
Remises de volume disponibles
Calendrier de remise sur volume
Quantité | Prix unitaire |
---|---|
1-4 | C$5,286.74 |
5-9 | C$5,022.40 |
10-24 | C$4,916.67 |
25-49 | C$4,705.20 |
50-99 | C$4,599.46 |
100+ | C$4,493.73 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- 12 mm (0.475') Diameter Incoloy® Elements and Stainless Steel Wetted Parts Standard
- Designed for Permanent Installation in Outdoor/ Indoor Applications
- 0.61 to 3.6 m (2 to 12') Vertical Riser Height (for Thermostat Designs)
- Weathertight Mounting Hardware Supplied
TAT60001 Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Power
Supply Voltage
Supply Voltage Type
Form Factor
Heating Element Length
Riser Length
Heated Medium
Sheath Material
Enclosure Type
Maximum Operating Temperature
Minimum Operating Temperature
Features
Application These fluid immersion heaters are designed for top mounting in large or deep enclosed tanks having a manhole access or opening suitable to insert and attach the heater. They are usable for either outdoor or indoor applications, within exposed or in-ground tanks and sewerage sumps. They are designed for permanent mounting and can be sealed weathertight with supplied gaskets and adjustable riser fittings. NEMA 4 terminal housing is easily removable and resealed to facilitate installation. Units are available with element watt densities from 6 watt/in² for heavy oils, to 60 watt/in² for clean water immersion applications. Element bundle diameters ranging from minimum of 254 mm (10") OD to a maximum of 762 mm (30") OD are available. Construction The tubular elements are welded into a submersible liquid-tight stainless steel junction box. Element power leads are routed up through adjustable riser pipe and connected to a terminal block inside the upper NEMA 4 terminal housing. Unless specified otherwise, heaters are factory wired for three phase and are easily converted to single phase. All wetted parts parts are 300 series stainless steel. Standard unit includes 15.5 to 121ºC (60 to 250°F) double-pole thermostat mounted in upper housing that has a 9.5 mm (3/8") diameter bulb and capillary installed in watertight thermowell with adjustable compression fitting.
Model No. | KW | Number of Elements | mm (inch) | |||||
---|---|---|---|---|---|---|---|---|
240V-1Ph | 240V-3Ph | 480V-1Ph | 480V-3Ph | A | B | E | ||
TAT60001 | TAT60002 | TAT60003 | TAT60004 | 5 | 3 | 1829 (72) | 387 (15.25) | 190 (7.5) |
TAT60005 | TAT60006 | TAT60007 | TAT60008 | 7.5 | 6 | 266 (10.5) | ||
TAT60009 | TAT60010 | TAT60011 | TAT60012 | 10 | 9 | 343 (13.5) | ||
— | TAT60013 | TAT60014 | TAT60015 | 15 | 12 | 419 (16.5) | ||
— | TAT60016 | TAT60017 | TAT60018 | 20 | 18 | 571 (22.5) | ||
— | — | TAT60019 | TAT60020 | 30 | 24 | 724 (28.5) | ||
Ordering Example: TAT60001, 5 KW immersion heater, 240 Vac, 1 phase. |



Are these designed for top mounting in large or deep enclosed tanks?
Thank you for your question. Yes, these are designed for top mounting in large or deep enclosed tanks. View our Technical Article for more detailed information. https://www.omega.com/en-us/resources/what-is-an-immersion-heater
Date published: 2019-06-26