PST rejoint DwyerOmega. En savoir plus>
Silicone Rubber Fiberglass Flexible Heater 450°F Max to 48"
Silicon Heaters | Flexible heating elements in Rubber and Fiberglass
Remises de volume disponibles
Calendrier de remise sur volume
| Quantité | Prix unitaire |
|---|---|
| 1-9 | C$86.97 |
| 10-24 | C$82.62 |
| 25-49 | C$80.88 |
| 50-99 | C$77.40 |
| 100-199 | C$75.66 |
| 200+ | C$73.92 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- Lightweight,Thin, Flexible
- Available in 2.5, 5 and 10 W/in2
- -56°C(-70°F) to 232°C (450°F) Operating Temperature
- Etched Foil
SRFRA-4/5-P Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Shape
Temprature range
Power Density
Power (watts)
Supply Voltage
Diameter
Width
Length
Pressure senstivie Adhesive (PSA)
Additional Option
Thickness
Heater Material
Silicone rubber fiberglass insulated flexible heaters can improve heat transfer and speed warm-ups where controlled heating is required in confined areas. Two circuit designs are available: etched foil or wire wound. Heaters with etched foil designed elements are available where the length or width dimension is less than 10"(254 mm). All other heaters where both the length and the width dimensions exceed 10" (254 mm) use the wire-wound element design. Effect of power density: gentle warming is best done with 2.5 W/in2. An excellent all-purpose unit is the 5 W/in2. Rapid warm-up and high temperature are achieved with the 10 W/in2; however, the temperature must be controlled as the safe maximum operating temperature limit of 450°F (232°C) may be exceeded.
CAUTION AND WARNING!
Fire and electrical shock may result if products are misused or installed or used by non-qualified personnel. See inside back cover for additional warning.
Applications
-Freeze Protection
-Low-Temperature Ovens
-Heat Tracing Systems
-Viscosity Control
-Dehumidification of Motors and Control Devices
SPECIFICATIONS
Wattage: 5 to 1440 Watts
Power: 115 or 230** VAC
Watt Density: 2.5, 5 and 10 W/in2
Lead Wire:
305 mm (12") PFA insulated
Thickness: 0.040" except at lead wire exit
Dielectric Strength: 1250 VAC
Maximum Temperature: heaters
without pressure sensitive adhesive, 232°C (450°F); heaters with pressure sensitive adhesive, 149°C (300°F)
Minimum Temperature: -56°C (-70°F)
Round Silicone Rubber Heaters
| Without PSA Model No. | With PSA Model No. | Diameter in. (cm) | Total Wattage for Watt Density | ||
| 2.5W/in2 | 5W/in2 | 10W/in2 | |||
| SRFRA-3/* | SRFRA-3/*-P | 3 (7.62) | - | 35 | 70 |
| SRFRA-4/* | SRFRA-4/*-P | 4 (10.16) | 31 | 62.8 | 125.6 |
| SRFRA-5/* | SRFRA-5/*-P | 5 (12.7) | - | 98.15 | 196.3 |
| SRFRA-6/* | SRFRA-6/*-P | 6 (15.24) | - | 141.3 | 282.7 |
| SRFRA-7/* | SRFRA-7/*-P | 7 (17.78) | 96.2 | 192.4 | 384.8 |
| SRFRA-8/* | SRFRA-8/*-P | 8 (20.32) | 125.65 | 251.3 | 502.6 |
| SRFRA-9/* | SRFRA-9/*-P | 9 (22.86) | 157.9 | 315.8 | 631.7 |
| SRFRA-10/* | SRFRA-10/*-P | 10 (25.4) | 196.25 | 392.5 | 785 |
/*Insert watt density: 2 for 2.5 W/in2,5 for 5 W/in2 or 10 for 10 W/in2.
If the table shows a "-" we do not offer the item in that dimension.
Rectangular Silicone Rubber Heaters
| Without PSA Model No. | With PSA Model No. | Width, In.(cm) | Length, In.(cm) | Total Wattage for Watt Density | ||
| 2.5W/in2 | 5W/in2 | 10W/in2 | ||||
| SRFGA-101/* | SRFGA-101/10-P | 1(3) | 1(3) | - | - | - |
| SRFGA-102/* | SRFGA-102/*-P | 1(3) | 2(5) | - | - | - |
| SRFGA-103/* | SRFGA-103/*-P | 1(3) | 3(8) | - | - | 30 |
| SRFGA-104/* | SRFGA-104/*-P | 1(3) | 4(10) | - | 20 | 40 |
| SRFGA-105/* | SRFGA-105/*-P | 1(3) | 5(13) | 12.5 | 25 | 50 |
| SRFGA-106/* | SRFGA-106/*-P | 1(3) | 6(15) | 15 | 30 | 60 |
| SRFGA-107/* | SRFGA-107/*-P | 1(3) | 7(18) | 17.5 | 35 | 70 |
| SRFGA-108/* | SRFGA-108/*-P | 1(3) | 8(20) | 20 | 40 | 80 |
| SRFGA-109/* | SRFGA-109/*-P | 1(3) | 9(23) | 22.5 | 45 | 90 |
| SRFGA-110/* | SRFGA-110/*-P | 1(3) | 10(25) | 25 | 50 | 100 |
| SRFGA-111/* | SRFGA-111/*-P | 1(3) | 11(28) | 27.5 | 55 | 110 |
| SRFGA-112/* | SRFGA-112/*-P | 1(3) | 12(30) | 30 | 60 | 120 |
| SRFGA-118/* | SRFGA-118/*-P | 1(3) | 18(46) | 45 | 90 | 180 |
| SRFGA-124/* | SRFGA-124/*-P | 1(3) | 24(61) | 60 | 120 | 240 |
| SRFGA-130/* | SRFGA-130/*-P | 1(3) | 30(76) | 75 | 150 | 300 |
| SRFGA-136/* | SRFGA-136/*-P | 1(3) | 36(91) | 90 | 180 | 360 |
| SRFGA-142/* | SRFGA-142/*-P | 1(3) | 42(107) | 105 | 210 | 420 |
| SRFGA-148/* | SRFGA-148/*-P | 1(3) | 48(122) | 120 | 240 | 480 |
| SRFGA-202/* | SRFGA-202/*-P | 2(5) | 2(5) | - | - | 40 |
| SRFGA-203/* | SRFGA-203/*-P | 2(5) | 3(8) | 15 | 30 | 60 |
| SRFGA-204/* | SRFGA-204/*-P | 2(5) | 4(10) | - | 40 | 80 |
| SRFGA-205/* | SRFGA-205/*-P | 2(5) | 5(13) | 25 | 50 | 100 |
| SRFGA-206/* | SRFGA-206/*-P | 2(5) | 6(15) | 30 | 60 | 120 |
| SRFGA-207/* | SRFGA-207/*-P | 2(5) | 7(18) | 35 | 70 | 140 |
| SRFGA-208/* | SRFGA-208/*-P | 2(5) | 8(20) | 40 | 80 | 160 |
| SRFGA-209/* | SRFGA-209/*-P | 2(5) | 9(23) | 45 | 90 | 180 |
| SRFGA-210/* | SRFGA-210/*-P | 2(5) | 10(25) | 50 | 100 | 200 |
| SRFGA-211/* | SRFGA-211/*-P | 2(5) | 11(28) | 55 | 110 | 220 |
| SRFGA-212/* | SRFGA-212/*-P | 2(5) | 12(30) | 60 | 120 | 240 |
| SRFGA-218/* | SRFGA-218/*-P | 2(5) | 18(46) | 90 | 180 | 360 |
| SRFGA-224/* | SRFGA-224/*-P | 2(5) | 24(61) | 120 | 240 | 480 |
| SRFGA-230/* | SRFGA-230/*-P | 2(5) | 30(76) | 150 | 300 | 600 |
| SRFGA-236/* | SRFGA-236/*-P | 2(5) | 36(91) | 180 | 360 | 720 |
| SRFGA-242/* | SRFGA-242/*-P | 2(5) | 42(107) | 210 | 420 | 840 |
| SRFGA-248/* | SRFGA-248/*-P | 2(5) | 48(122) | 240 | 480 | 960 |
| SRFGA-303/* | SRFGA-303/*-P | 3(8) | 3(8) | 22.5 | 45 | 90 |
| SRFGA-304/* | SRFGA-304/*-P | 3(8) | 4(10) | 30 | 60 | 120 |
| SRFGA-305/* | SRFG-305/*-P | 3(8) | 5(13) | 37.5 | 75 | 150 |
| SRFGA-306/* | SRFGA-306/*-P | 3(8) | 6(15) | 45 | 90 | 180 |
| SRFGA-307/* | SRFGA-307/*-P | 3(8) | 7(18) | 52.5 | 105 | 210 |
| SRFGA-308/* | SRFGA-308/*-P | 3(8) | 8(20) | 60 | 120 | 240 |
| SRFGA-309/* | SRFGA-309/*-P | 3(8) | 9(23) | 67.5 | 135 | 270 |
| SRFGA-310/* | SRFGA-310/*-P | 3(8) | 10(25) | 75 | 150 | 300 |
| SRFGA-311/* | SRFGA-311/*-P | 3(8) | 11(28) | 82.5 | 165 | 330 |
| SRFGA-312/* | SRFGA-312/*-P | 3(8) | 12(30) | 90 | 180 | 360 |
/*Insert watt density: 2 for 2.5 W/in2,5 for 5 W/in2 or 10 for 10 W/in2.
If the table shows a "-" we do not offer the item in that dimension.
Rectangular Silicone Rubber Heaters
| Without PSA Model No. | With PSA Model No. | Width, In.(cm) | Length, In.(cm) | Total Wattage for Watt Density | ||
| 2.5W/in2 | 5W/in2 | 10W/in2 | ||||
| SRFGA-318/* | SRFGA-318/*-P | 3(8) | 18(46) | 135 | 270 | 540 |
| SRFGA-324/* | SRFGA-324/*-P | 3(8) | 24(61) | 180 | 360 | 720 |
| SRFGA-330/* | SRFGA-330/*-P | 3(8) | 30(76) | 225 | 450 | 900 |
| SRFGA-336/* | SRFGA-336/*-P | 3(8) | 36(91) | 270 | 540 | 1080 |
| SRFGA-342/* | SRFGA-342/*-P | 3(8) | 42(107) | 315 | 630 | 1260 |
| SRFGA-348/* | SRFGA-348/*-P | 3(8) | 48(122) | 360 | 720 | - |
| SRFGA-404/* | SRFGA-404/*-P | 4(10) | 4(10) | 40 | 80 | 160 |
| SRFGA-405/* | SRFGA-405/*-P | 4(10) | 5(13) | 50 | 100 | 200 |
| SRFGA-406/* | SRFGA-406/*-P | 4(10) | 6(15) | 60 | 120 | 240 |
| SRFGA-407/* | SRFGA-407/*-P | 4(10) | 7(18) | 70 | 140 | 280 |
| SRFGA-408/* | SRFGA-408/*-P | 4(10) | 8(20) | 80 | 160 | 320 |
| SRFGA-409/* | SRFGA-409/*-P | 4(10) | 9(23) | 90 | 180 | 360 |
| SRFGA-410/* | SRFGA-410/*-P | 4(10) | 10(25) | 100 | 200 | 400 |
| SRFGA-411/* | SRFGA-411/*-P | 4(10) | 11(28) | 110 | 220 | 440 |
| SRFGA-412/* | SRFGA-412/*-P | 4(10) | 12(30) | 120 | 240 | 480 |
| SRFGA-418/* | SRFGA-418/*-P | 4(10) | 18(46) | 180 | 360 | 720 |
| SRFGA-424/* | SRFGA-424/*-P | 4(10) | 24(61) | 240 | 480 | 960 |
| SRFGA-430/* | SRFGA-430/*-P | 4(10) | 30(76) | 300 | 600 | 1200 |
| SRFGA-436/* | SRFGA-436/*-P | 4(10) | 36(91) | 360 | 720 | - |
| SRFGA-442/* | SRFGA-442/*-P | 4(10) | 42(107) | 420 | 840 | - |
| SRFGA-448/* | SRFGA-448/*-P | 4(10) | 48(122) | 480 | 960 | - |
| SRFGA-505/* | SRFGA-505/*-P | 5(13) | 5(13) | 62.5 | 125 | 250 |
| SRFGA-506/* | SRFGA-506/*-P | 5(13) | 6(15) | 75 | 150 | 300 |
| SRFGA-507/* | SRFGA-507/*-P | 5(13) | 7(18) | 87.5 | 175 | 350 |
| SRFGA-508/* | SRFGA-508/*-P | 5(13) | 8(20) | 100 | 200 | 400 |
| SRFGA-509/* | SRFGA-509/*-P | 5(13) | 9(23) | 112.5 | 225 | 450 |
| SRFGA-510/* | SRFGA-510/*-P | 5(13) | 10(25) | 125 | 250 | 500 |
| SRFGA-511/* | SRFGA-511/*-P | 5(13) | 11(28) | 137.5 | 275 | 550 |
| SRFGA-512/* | SRFGA-512/*-P | 5(13) | 12(30) | 150 | 300 | 600 |
| SRFGA-606/* | SRFGA-606/*-P | 6(15) | 6(15) | 90 | 180 | 360 |
| SRFGA-607/* | SRFGA-607/*-P | 6(15) | 7(18) | 105 | 210 | 420 |
| SRFGA-608/* | SRFGA-608/*-P | 6(15) | 8(20) | 120 | 240 | 480 |
| SRFGA-609/* | SRFGA-609/*-P | 6(15) | 9(23) | 135 | 270 | 540 |
| SRFGA-610/* | SRFGA-610/*-P | 6(15) | 10(25) | 150 | 300 | 600 |
| SRFGA-611/* | SRFGA-611/*-P | 6(15) | 11(28) | 165 | 330 | 660 |
| SRFGA-612/* | SRFGA-612/*-P | 6(15) | 12(30) | 180 | 360 | 720 |
| SRFGA-618/* | SRFGA-618/*-P | 6(15) | 18(46) | 270 | 540 | 1080 |
| SRFGA-624/* | SRFGA-624/*-P | 6(15) | 24(61) | 360 | 720 | _ |
| SRFGA-630/* | SRFGA-630/*-P | 6(15) | 30(76) | 450 | 900 | — |
| SRFGA-636/* | SRFGA-636/*-P | 6(15) | 36(91) | 540 | 1080 | — |
| SRFGA-642/* | SRFGA-642/*-P | 6(15) | 42(107) | 630 | 1260 | — |
| SRFGA-648/* | SRFGA-648/*-P | 6(15) | 48(122) | 720 | - | — |
| SRFGA-707/* | SRFGA-707/*-P | 7(18) | 7(18) | 122.5 | 245 | 490 |
| SRFGA-708/* | SRFGA-708/*-P | 7(18) | 8(20) | 140 | 280 | 560 |
| SRFGA-709/* | SRFGA-709/*-P | 7(18) | 9(23) | 157.5 | 315 | 630 |
/*Insert watt density: 2 for 2.5 W/in2,5 for 5 W/in2 or 10 for 10 W/in2.
Rectangular Silicone Rubber Heaters
| Without PSA Model No. | With PSA Model No. | Width, In.(cm) | Length, In.(cm) | Total Wattage for Watt Density | ||
| 2.5W/in2 | 5W/in2 | 10W/in2 | ||||
| SRFGA-710/* | SRFGA-710/*-P | 7(18) | 10(25) | 175 | 350 | 700 |
| SRFGA-711/* | SRFGA-711/*-P | 7(18) | 11(28) | 192.5 | 385 | 770 |
| SRFGA-712/* | SRFGA-712/*-P | 7(18) | 12(30) | 210 | 420 | 840 |
| SRFGA-808/* | SRFGA-808/*-P | 8(20) | 8(20) | 160 | 320 | 640 |
| SRFGA-809/* | SRFGA-809/*-P | 8(20) | 9(23) | 180 | 360 | 720 |
| SRFGA-810/* | SRFGA-810/*-P | 8(20) | 10(25) | 200 | 400 | 800 |
| SRFGA-811/* | SRFGA-811/*-P | 8(20) | 11(28) | 220 | 440 | 880 |
| SRFGA-812/* | SRFGA-812/*-P | 8(20) | 12(30) | 240 | 480 | 960 |
| SRFGA-818/* | SRFGA-818/*-P | 8(20) | 18(46) | 360 | 720 | - |
| SRFGA-824/* | SRFGA-824/*-P | 8(20) | 24(61) | 480 | 960 | — |
| SRFGA-830/* | SRFGA-830/*-P | 8(20) | 30(76) | 600 | 1200 | — |
| SRFGA-836/* | SRFGA-836/*-P | 8(20) | 36(91) | 720 | - | — |
| SRFGA-842/* | SRFGA-842/*-P | 8(20) | 42(107) | 840 | - | — |
| SRFGA-848/* | SRFGA-848/*-P | 8(20) | 48(122) | 960 | - | — |
| SRFGA-909/* | SRFGA-909/*-P | 9(23) | 9(23) | 202.5 | 405 | 810 |
| SRFGA-910/* | SRFGA-910/*-P | 9(23) | 10(25) | 225 | 450 | 900 |
| SRFGA-911/* | SRFGA-911/*-P | 9(23) | 11(28) | 247.5 | 965 | 990 |
| SRFGA-912/* | SRFGA-912/*-P | 9(23) | 12(30) | 270 | 540 | 1080 |
| SRFGA-1010/* | SRFGA-1010/*-P | 10(25) | 10(25) | 250 | 500 | 1000 |
| SRFGA-1011/* | SRFGA-1011/*-P | 10(25) | 11(28) | 275 | 550 | 1100 |
| SRFGA-1012/* | SRFGA-1012/*-P | 10(25) | 12(30) | 300 | 600 | 1200 |
| SRFGA-1018/* | SRFGA-1018/*-P | 10(25) | 18(46) | 450 | 900 | — |
| SRFGA-1024/* | SRFGA-1024/*-P | 10(25) | 24(61) | 600 | 1200 | — |
| SRFGA-1030/* | SRFGA-1030/*-P | 10(25) | 30(76) | 750 | - | — |
| SRFGA-1036/* | SRFGA-1036/*-P | 10(25) | 36(91) | 900 | - | — |
| SRFGA-1042/* | SRFGA-1042/*-P | 10(25) | 42(107) | 1050 | — | — |
| SRFGA-1048/* | SRFGA-1048/*-P | 10(25) | 48(122) | 1200 | — | — |
| SRFGA-1111/* | SRFGA-1111/*-P | 11(28) | 11(28) | 302.5 | 605 | - |
| SRFGA-1112/* | SRFGA-1112/*-P | 11(28) | 12(30) | 330 | 660 | - |
| SRFGA-1212/* | SRFGA-1212/*-P | 12(30) | 12(30) | 360 | 720 | - |
| SRFGA-1218/* | SRFGA-1218/*-P | 12(30) | 18(46) | 540 | 1080 | — |
| SRFGA-1224/* | SRFGA-1224/*-P | 12(30) | 24(61) | 720 | - | — |
| SRFGA-1230/* | SRFGA-1230/*-P | 12(30) | 30(76) | 900 | — | — |
| SRFGA-1236/* | SRFGA-1236/*-P | 12(30) | 36(91) | 1080 | — | — |
/*Insert watt density: 2 for 2.5 W/in2,5 for 5 W/in2 or 10 for 10 W/in2.
Rated 5 out of
5
by
Dario from
Very durable and easy
Wonderful product, I use it inside our Nema enclosure to avoid the switch to froze and they work great, very durable and super easy to install
Date published: 2021-05-06
Rated 5 out of
5
by
Josep from
Easy to install and functional.
We are using them to bake an ultra-high vacuum chamber and they work very well.
Date published: 2024-02-09
Rated 5 out of
5
by
Mackenzie Aircraft from
Happy with Purchase
Good quality, fast availability. Always easy to work with.
Date published: 2023-06-01
Rated 5 out of
5
by
M ARM from
Excellent
Product as described, fast delivery, and easy order process
Date published: 2023-02-21
Rated 1 out of
5
by
Anonymous from
Buyer be where
Picture is not what you will get. Nothing stated item will need other parts to work. Returned item at additional cost. VERY Frustrated.
Date published: 2023-02-08
Rated 5 out of
5
by
Stanford from
Great Product
These were perfect for the application, I will be purchasing more in the future.
Date published: 2023-01-06
Rated 5 out of
5
by
Josh b from
Flexible Heater
Great product. It works as intended with no issues.
Date published: 2022-11-11
Rated 5 out of
5
by
Harrison Longbows from
Five Stars
This product can have multiple applications. I’m a bowyer. I use it to laminate bow limbs.
Date published: 2022-03-27
RoHS 2015/863 - Voir le certificat
Approuvé CE
UKCA
I am looking for a MTBF value, or any reliability information for P/N SRFGA-236/2-P. Thanks!
Hi CrimsonQuality,
Flexible heaters do not com with a 'failure' specification. If used properly, no failures should occur.
Date published: 2022-09-09
I need dimensional information about part number "SRFGA-1248/2-P". I need this for modeling purposes and proper fitment to the vessel. Most important is length and width. Thanks!
The length is 48" and the width is 12" for this particular Heater item number.
Date published: 2021-08-19
I want to find a small strip desktop heating pad that is powered from a USB port on computer. I use a rolling writing desk without power plug in near by. I did see one a while back and now cannot find it again.
Most USB ports put out 5 volt @ 100mA DC. Unfortunately Omega does not sell a heater rated for 5 volt DC.
Date published: 2020-01-21
I am looking for a heating element that would uniformly heat a small chamber about 6ft x 3 ft x 5 ft (about 100 ft3). cover large area for uniformity. T= 30-60C, for drying food material/ herbal / fruit etc. comply to FDA for food processing.
Thank you for your inquiry. Please send your request to heaters@omega.com
Date published: 2020-05-18
Can you explain how to connect this heating pad to a power supply. I got a 120 V part and confused about how to connect these two cords to a plug.
It would be best in this case to call in and ask for the Temperature group or send an email request to temp@omega.com for assistance.
Date published: 2022-04-25
Please suggest a UL; CSA' approved heat cord/tape.
Thank you for the inquiry. Unfortunately we do not offer heat cord/tape with UL/CSA approval.
Best regards
OMEGA
Date published: 2024-02-04
Can I use these on water pipes under a trailer??
This flexible heater series can be used to wrap around the outside of a pipe but not rated for outdoor use.
Date published: 2020-01-22
Hi, for SRFGA-208/10-P, as it uses pressure-sensitive adhesive, is it possible to transfer the heater from one system to another? Or do we need to reapply adhesive/RTV?
Hi Jeri
Thank you for the inquiry. You will need to reapply adhesive.
Best regards,
OMEGA
Date published: 2020-08-19
Looking for a silicon heat blanket to help bend the sides when making ukuleles and other small bodied stringed instruments. Needs to be 75mm wide and 450mm ling and work with 240Vac. What do you suggest. Also need shipping to New Zealand.
Thank you for your inquiry. OMEGA UK, which is responsible for your area. They are online at http://www.omega.co.uk
Here also is their contact information:
http://www.omega.co.uk/cservice/contactus.asp
Date published: 2022-06-06
What is the wattage (or resistance) tolerance for etched foil heaters?
Hi Serg,
Thank you for the inquiry. Resistance tolerance is +/- 10%.
Best regards
OMEGA
Date published: 2022-01-17
I need a heating film with 15mm hole in the middle. Outer dimentions should be 5cm x 5cm. Opertating temparature range should be 30-100C. What are the options I have?
This would not be a standard part. Most custom designs have a $1000 min order and 8-10 week lead time. Please send your request including quantity along with a dimensional drawing or sketch to: heaters@omega.com
Date published: 2020-02-24
Can I use a DC power source with a 120 Vac product?
Hi Paul,
These are rated for VAC source only.
Best regards
OMEGA
Date published: 2021-06-16
I need to rapidly (in <10 min) heat a thin 2x4 inch copper plate from room temp to 120F. Probably only need 2.5 W/sq in, but got the 10 W/sq in. Is this safer, since latter can 'handle' higher current without burning up if temp controller fails?
Hi bbudd,
Thank you for the inquiry. The 2 versions have the same silicone material. The 10 watt/sq in will heat up much faster so it has potential to burn out faster than the 2.5 watts/sq in. You'll need fast responding temperature sensor and and fast responding controller for the 10 watt/ sq in heater.
Best regards
OMEGA
Date published: 2022-05-06
Is the outlet connector for the SRFGA-1012-5-P a Q-710? How can I modify my order to have this type of connector if the default one is not this (or compatible with Q-712)?
The SRFGA series Heaters are only sold with stripped leads and the customers add connectors or use other means to make the electrical connection.
Date published: 2024-11-23
Hi, Could the heat be varied using a rheostat or some similar device ?
Thank you for your inquiry. You may control heaters with current or voltage regulating devices.
Date published: 2021-06-28
I'm looking to use one of these heaters to raise the temperature to about 210 ° C for 48 hours. Is it possible to control the temperature in these heaters? If I want to wrap it around a cylinder, does it sell the right wire for it?
Hi Harzandi,
Thank you for the inquiry.
Please forward this application support request to HEATERS@OMEGA.COM
Best regards
OMEGA
Date published: 2022-09-09
Can I use this heater in a pit where there is a pipe, but the pit gets filled with water. Was wondering if this was waterproof and submersible?
The Heaters are water resistant so splashing on their surface is OK but they should not be submerged.
Date published: 2024-11-07
Are these mats waterproof? I am heating up frozen metal and there will be some water condensation on the mat. Is this a hazard? If yes, should I try to enclose the mat in some waterproof material? Many thanks.
Hi Bbudd1,
Thank you for the inquiry. These heating pads are not waterproof. Best is to provide protective cover to prevent wet conditions at the heater location.
Best regards
OMEGA
Date published: 2022-05-13
I am looking to incorporate one of these heaters to maintain temp around 35 C for extrusion. Can these be controlled by our microcontrollers supporting other component with adequate relays and power supply or does it require a dedicated controller?
Thank you for your inquiry! Heaters are generally recommended for use with controllers/PLC's. However, your microcontrollers should be compatible given that they can supply just below the maximum supply voltage of the heater.
Date published: 2021-09-19
I need a non-magnetic heater, what material is the foil made from? I will turn the heater off during measurements so the current from the AC power will not be an issue.
The only non-magnetic Heater Omega sells is the PLMLV series. The Silicone insulated Heaters use NiCr or Inconel and are not considered non-magnetic in all cases.
Date published: 2022-03-21
Do you have a list of PID temp controllers and relays that would work with these heaters?
Thank you for your inquiry. We offer a wide range of PID controllers with built-in mechanical relays as well as external solid state relays that are compatible with this heater series. Once you determine your total wattage requirements, you can then select the appropriate model from our website.
Date published: 2021-09-02
Can the Silicone Heating mats withstand a pressure application?
Clamping pressure for silicone rubber heaters is up to 18lb/in2 on a flat surface. This is the only criteria available for this type of Heater regarding pressure.
Date published: 2022-06-24
Is this heater compatible with a model 330 Lakeshore PID?
Omega's SRFGA Heaters are plain Resistance Heaters so you will need to check with Lakeshore to see what Amperage their Controllers can tolerate. Once you have that information feel free to contact Omega with the specifications for the Heater your process requires.
Date published: 2024-01-24