General Purpose Air Line Pressure Regulators for Compressed Air
Remises de volume disponibles
Calendrier de remise sur volume
| Quantité | Prix unitaire |
|---|---|
| 1-4 | C$53.00 |
| 5-9 | C$50.35 |
| 10-24 | C$49.29 |
| 25-49 | C$47.17 |
| 50-99 | C$46.11 |
| 100+ | C$45.05 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- Full Flow Gauge Ports - 15 SCFM (7 DM3/S)
- Maximum Inlet Pressure 20 bar (300 psig)
- Snap Action Locking Adjustment Knob
- Standard Relieving Allows Reduction of Pressure When System is Dead-Ended
- 1/4" PTF Inlet Outlet Ports
- Bushings Available for 1/8" PTF Ports
R07-200-RGLA Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Pressure Range
Maximum Inlet Pressure
Pressure Port Size
Pressure Port Type
Media Type
Features
The R07 series has been discontinued. Please contact our Flow Engineering department for a viable replacement.
General purpose air pressure regulators are designed for in-line use as a single regulating control source for compressed air. These air pressure regulators are full flow ported for excellent flow and regulation characteristics. They include PTF threads, relieving diaphragm, gauge, and a 0.3 to 8.5 bar (5 to 125 psig) pressure adjustment range. They are suitable for a wide range of pneumatic tools and components and an excellent point of use economic regulator. These units can be panel mounted with a 30 mm (1.19') diameter mounting hole or can be used with the optional bracket and panel nut.
SPECIFICATIONS
Operating Temperature*: -34 to 65°C (30 to 150°F)
Maximum Pressure: 20 bar (300 psig)
Port Sizes:
1/4' PTF supply and output
1/8' PTF gauge
Pressure Drop: 15 psi at 150 psi inlet and 90 psi output
Flow : 7dm³/s (15 scfm)
Materials:
Body: Zinc
Bonnet: Acetal
Valve Seat: Acetal
Elastomers: Nitrile
*Air supply must be dry enough to avoid ice formation at temperatures below 2°C (35°F)
General purpose air pressure regulators are designed for in-line use as a single regulating control source for compressed air. These air pressure regulators are full flow ported for excellent flow and regulation characteristics. They include PTF threads, relieving diaphragm, gauge, and a 0.3 to 8.5 bar (5 to 125 psig) pressure adjustment range. They are suitable for a wide range of pneumatic tools and components and an excellent point of use economic regulator. These units can be panel mounted with a 30 mm (1.19') diameter mounting hole or can be used with the optional bracket and panel nut.
SPECIFICATIONS
Operating Temperature*: -34 to 65°C (30 to 150°F)
Maximum Pressure: 20 bar (300 psig)
Port Sizes:
1/4' PTF supply and output
1/8' PTF gauge
Pressure Drop: 15 psi at 150 psi inlet and 90 psi output
Flow : 7dm³/s (15 scfm)
Materials:
Body: Zinc
Bonnet: Acetal
Valve Seat: Acetal
Elastomers: Nitrile
*Air supply must be dry enough to avoid ice formation at temperatures below 2°C (35°F)
Rated 4 out of
5
by
TonyP from
Solid regulator
I puchased for my Hitachi air compressor. Much more solid than the original part, which failed twice. I had to make a slight modification to my compressor to get it to fit.
Date published: 2016-06-02
Accessories