Appelez-nous au 1-888-826-6342
Compact 316 SS Ultrasonic NO Level Switch
COMPACT ULTRASONIC, SOLID STATE LIQUID LEVEL SWITCH
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- Easy to Install
- No Moving Parts
- Epoxy-Sealed Integral Electronics with Sensor
- Low-Cost Replacement to Mechanical Float
LVSW-720 Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Process Connection Size
Media Type
Max Operating Pressure
Max Process Temperature
Wetted Materials
Process Connection Type
Switch Rating and Type
Features
The LVSW-710/720 compact solid state liquid level switch is a great replacement for mechanical float-type liquid level devices. The switch employs proven ultrasonic technology and solid state integral electronics in a small package. The LVSW-710/720 provides reliable operation in virtually any liquid, regardless of viscosity. This eliminates problems of stickiness and failure rate due to finite mechanical life inherent in the mechanical float design. The combination of fully epoxy-sealed electronics and ultrasonic sensing technology will provide years of maintenance-free service
SPECIFICATIONS
Repeatability: 2 mm or better
Delay: 0.5 sec
Input Power: 5 to 30 Vdc
Leakage Current: Less than 50 uA
Wire Length: 300 mm (12")
Protection: Transient, reverse polarity
Sensor: 316 LSS
Temperature: -29 to 80°C (-20 to 176°F)
Pressure: Up to 250 psig (1724 kPa)
Mounting: ¼ or ½ NPT (depending on model number)
Relay Output: 1 A SPST, NO
SPECIFICATIONS
Repeatability: 2 mm or better
Delay: 0.5 sec
Input Power: 5 to 30 Vdc
Leakage Current: Less than 50 uA
Wire Length: 300 mm (12")
Protection: Transient, reverse polarity
Sensor: 316 LSS
Temperature: -29 to 80°C (-20 to 176°F)
Pressure: Up to 250 psig (1724 kPa)
Mounting: ¼ or ½ NPT (depending on model number)
Relay Output: 1 A SPST, NO
Rated 4 out of
5
by
Cable User from
Missing document info
I couldn't find any documentation that describes the cable/wire information (gauge, insulation/jacket type, etc), so I wrote this review to provide that:
The cable that was attached to mine is a Belden 9535, and Belden provides a nice spec sheet on their website.
Date published: 2017-06-02
Rated 5 out of
5
by
James1 from
Great Sensor - Would Like to See Future Variations
Sensor operating voltage is versatile
(5-30VDC). My application uses 6VDC.
Sensor is compact enough to make it work in tight areas. It is 1/2” NPT and 3” long.
I would love to see the following variations in the future:
1) Make the wiring via a connector instead of cable coming out connector. This will allow easy removal.
2) If point 1 is not possible, make the cable longer, maybe 6-ft.
3) Make another sensor with longer length; may be 2-in longer. This will allow the shorter one to be used for level control, while the longer used for low level alarm.
Date published: 2021-03-11
Do you have an intrinsically safe/ explosion rated version of this sensor?
Unfortunately, we do not have or carry ultrasonic level switches rated for hazardous applications.
Date published: 2020-03-02
Is the alarm point at the centerline of the body? Does the rotation of the sensor affect the alarm point? The manual is very unclear and has no indication of mounting orientation.
Thanks for the inquire
The entire gap would have to be filled to trigger an alarm condition. Additionally, the units can be mounted in any orientation.
Date published: 2022-03-11
Does the sensor need to be installed a certain distance from walls or obstacles to ensure proper functionality?
Thank you for your inquiry about the level switch. It does not have to install a specific distance from the side wall. As long s liquid can make contact, it will change stateas on the relay.
Date published: 2022-10-10
Can the sensor be mounted vertically?
Unfortunately, these level switches are only intended for side mounting. Please consider the LVSW-701 as an alternative that can be mounted in any direction.
Date published: 2021-11-17
What Controller or other device does this get attached to?
Thank you for your inquiry. Unfortunately, there are no other device attached or link wit this level switch.
Date published: 2020-12-08
Will this switch operate in a engine coolant type of liquid ie glycol ?
Thank you for your inquiry! Yes, this switch will operate effectively with engine coolant.
Date published: 2021-05-24
Can you provide a CE declaration for the LVSW-710?
Yes, we can. Send us an email to flow@omega.com and we can reply with a copy.
Date published: 2020-06-09
What is the wire gauge and its insulation thickness for this product? What about insulation material?
24 AWG stranded (7x32) tinned copper conductors, semi-rigid PVC insulation,
PVC - Polyvinyl Chloride: Thickness 0.032 in (0.81 mm) and Diameter 0.189 in (4.80 mm)
Date published: 2024-01-11