Appelez-nous au 1-888-826-6342
316 SS Single Point Ultrasonic Liquid Level Switch
ULTRASONIC SOLID STATE LIQUID LEVEL SWITCH
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- 300:1 Wet-to-Dry Ratio with 316 SS Sensor
- E poxy-Sealed Integral Electronics with Sensor
- Low-Cost Replacement to Mechanical Float
- Mounts in Any Direction
LVSW-701 Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Media Type
Max Operating Pressure
Max Process Temperature
Wetted Materials
Process Connection Type
Process Connection Size
Switch Rating and Type
Features
The LVSW-701 Series solid state liquid level switch is a direct replacement for mechanical float-type liquid level devices. The switch employs proven ultrasonic technology and solid state integral electronics, and provides reliable operation in virtually any liquid, regardless of viscosity. This eliminates problems of stickiness and failure rate due to finite mechanical life inherent in the mechanical float design. The combination of fully epoxy-sealed electronics and ultrasonic sensing technology will provide years of maintenance free service.
Specifications
Repeatability: 2 mm (0.08") or better
Delay: 0.5 sec
Input Power: 6 to 24 Vdc
Leakage Current: Less than 50 uA
Outputs:
Relay Output: 1 A SPDT relay
Protection: Transient, reverse polarity
Sensor: 316 LSS
Temperature: -29 to 71°C (-20 to 160°F)
Pressure:
316 SS Models: Up to 1000 psig (6895 kPa)
Mounting: ¾ NPT standard
Specifications
Repeatability: 2 mm (0.08") or better
Delay: 0.5 sec
Input Power: 6 to 24 Vdc
Leakage Current: Less than 50 uA
Outputs:
Relay Output: 1 A SPDT relay
Protection: Transient, reverse polarity
Sensor: 316 LSS
Temperature: -29 to 71°C (-20 to 160°F)
Pressure:
316 SS Models: Up to 1000 psig (6895 kPa)
Mounting: ¾ NPT standard
The LVSW-701 product data sheet shows the input power requirement as 6-24VDC. The LVSW-701 User Guide states the input power as 9-30VDC. What is the correct input power requirement?
Thank you for your inquiry. Best to use a power source of 12 to 24 VDC to power the level switch and separate power is required for the dry contact 1 Amp relay.
Date published: 2023-12-01
Is this the best replacement for the discontinued LV751-DC radio frequency level detector?
Thank you for your question?
The only DC powered radio frequency level switch we have is the LVCN7212. The connection size for this sensor is ¾” and the maximum pressure this sensor can handle is 145PSI. Please review the specs for the LVCN7212 and ensure it will work for your application
Date published: 2019-07-03
Do you have this or a similar item that is NSF61 rated?
Thank you for your inquiry on this product. Unfortunately, no.
Date published: 2020-07-11
what is the length of the cord.
Thank you for your inquiry about the level switch. The cable length is 12 inches and unfortunately, cannot be customized for longer lengths.
Date published: 2022-06-09
For the LVSW-701 Ultrasonic Liquid Level Switch I need the RoHS and the EMC Declaration of Conformity If the Low Voltage Directive (LVD) applies I nedd it also.
Thank you for your inquiry about the level switch. Please direct your inquiry to our Customer Care Group and a representative can a copy of the Declaration of Conformity in a separate email. Also, the level switch is not RoHS Compliant as indicated on its data sheet.
Date published: 2022-06-08
I need a cable length longer than 12". Can you provide the cable specifications for the Omega LVSW-701 so we can search for a compatible cable to extend your cable length?
Thank you for your inquiry. Unfortunately, there is no option to extend the cable length.
Date published: 2023-12-01