PST rejoint DwyerOmega. En savoir plus>
3" and 5" Dial Bimetal Thermometer with NPT options
DialTemp™, Bi-Metal Stem Thermometers
Remises de volume disponibles
Calendrier de remise sur volume
| Quantité | Prix unitaire |
|---|---|
| 1-4 | C$208.95 |
| 5-9 | C$198.50 |
| 10-24 | C$194.32 |
| 25-49 | C$185.97 |
| 50-99 | C$181.79 |
| 100+ | C$177.61 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- Made Entirely of Stainless Steel
- Hermetically Sealed
- Model X and XR: 3 Inch O.D. Head
- Model V and VR: 5 Inch O.D. Head
XR-50-500F-9-1/2 Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Dial Diameter
Process Temperature Range
Dual Range
Connection Type
Resolution/Division
Stem Length
Series
Accuracy Value
Stem Dia
Thermometers of this design are well adapted to installation on top of tanks, boilers, in high locations or other areas where it would be difficult to read a standard angle-form instrument.
Stems are 1/4' in diameter. Stem lengths up to 36' can be supplied.
Normally supplied with the stem at the BOTTOM (6 o’clock) position, on special order, these thermometers can be set with the stem protruding at the LEFT (9 o’clock), TOP (12 o’clock) or RIGHT (3 o’clock) positions. If not specified, the standard BOTTOM (6 o’clock) position will be supplied.
X, XR, V and VR
Ranges and °Divisions
* Minimum Stem Length - 4'
**Range available in X and XR Models only
†Range available in V and VR Models only
Stems are 1/4' in diameter. Stem lengths up to 36' can be supplied.
Normally supplied with the stem at the BOTTOM (6 o’clock) position, on special order, these thermometers can be set with the stem protruding at the LEFT (9 o’clock), TOP (12 o’clock) or RIGHT (3 o’clock) positions. If not specified, the standard BOTTOM (6 o’clock) position will be supplied.
X, XR, V and VR
Ranges and °Divisions
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
**Range available in X and XR Models only
†Range available in V and VR Models only
