Embases encliquetables pour connecteurs standards pour thermocouplesSPJSPJ
L'aperçu du produit
Number of Connector Rows
1
Number of Jacks
6
Panel Height
0.635 in
Panel Length
1.195 in
Panel Material
Glass Filled Nylon
Process Temperature, Max
220 °C
Process Temperature, Min
-29 °C
Description
Les embases SPJ se montent très facilement, sans aucun outillage, à l'aide des clips de verrouillage à ressort de part et d'autre de chaque embase. Une petite patte et une encoche placée sur les embases permettent de les maintenir alignées même si elles sont montées ensemble dans la même découpe, sans demander d'adaptation mécanique précise.
Les connecteurs SPJ sont en plastique haute résistance utilisable jusqu'à 205°C et portent les codes de couleur IEC ou ANSI. Ils acceptent tous les connecteurs mâles pour thermocouples, de taille standard et sont réalisés en alliages de qualité thermocouple pour tous les types existants, y compris les couples à base de tungstene..
Pour obtenir les caractéristiques complètes de ces produits, cliquez sur le lien au bas de cette page.
Rated 5 out of
5 by
AndyR from
Minimal junction error, easy to mount.Bought J-type thermocouple panel mount set to extend precision industrial heat blanket controls. Works well, temp. junction error is very minimal.
Date published: 2016-02-12
Rated 5 out of
5 by
Suntron97 from
Online Ordering ProcessThe product speaks for itself. It is the ordering process that makes purchasing a pleasant experience. The format and layout is easy to navigate compared to other online sites.
Date published: 2016-10-01
Rated 5 out of
5 by
Jim W from
Snap in TC connectorsThese snap in connectors are economically priced. Buying them through the web site is easy as 1,2,3.
Date published: 2024-12-02
Rated 5 out of
5 by
Anonymous from
Excellent Snap In JackOur customers really like this connector and have had no issues with the design and function
What is the max panel thickness these snap-in jacks will fit?
Asked by: KenA
Thank you for your inquiry. Max panel thickness 1/8" (0.125").
Answered by: Application Engineer CB
Date published: 2021-04-15
For securing wires with the screwdown, there is the screw itself, then a plate, then the plastic base with the brass fitting. Should the thermocouple wire be sandwiched between the screw and the plate, or bewteen the plate and the base?
Asked by: rk4321
Thank you for your inquiry rk4321. You lift the screw and the plate goes up. You insert the wire and then you tight the screw tightening the plate on top of the wire. Therefore, the wire will be between the plate and the base.
Answered by: Application Engineer MC
Date published: 2021-04-13
The datasheet provides the panel cutout size, and the side profile size of the jack connector, but not how wide the actual connector is from the front. How wide are the jacks/how far apart do the cutouts need to be spaced for side-by-side jacks?
Asked by: malomartwo
Thank you for your inquiry! The panel jacks will have a width of 0.75" and therefore the 0.115" apart
Answered by: Application Engineer JM
Date published: 2021-08-20
Just checking if this jack panel is "CE approved"? If not, are there any jack panel that has a CE approval rating?
Thank you.
Asked by: Hi Tech Furnace
Thank you for your inquiry. None of our jack panel assemblies carry a CE approval.
