Hi, what would be the most sutable type of thermocouple wire to be used for measuring a temperature around -5c to +5c ? I was planning to use the HH-25U or HH12C readout. Is Type T is more accurate than K or J for example?.

Thank you for your inquiry. At low temperatures, Type T is the most accurate of all thermocouple types.

Hi I am looking at purchasing a spool of TT-K-24-500 and I need it calibrated How do I go about doing this?

Hello, If you need the wire with a calibration certificate you can order as part number TT-K-24-500-CAL-3.

Hi, Is the wire compatible with organic/week acidic solution of chemical reaction to measure the temperature of the solution?

Hi Pawan, The thermocouple alloys may contaminate your process. For this I would recommend HSTC series; hermetically sealed in PFA thermocouples. https://www.omega.com/en-us/temperature-measurement/temperature-wire-sensors/hstc/p/HSTC-TT-20S-65 Best regards, OMEGA

What's the minimum bend radius?

Thank you for the inquiry. Please allow for 5 to 7 diameters of the wire (narrow side dimension). Best regards OMEGA

Hi, Is compatible with OM-CP-OCTTEMP-A? Regards

Hi, thank you for your question. OM-CP-OCTTEMP-A if definitely compatible with type K thermocouples. If you are making your own thermocouples with this wire, please remember to use miniature connectors (like SMPW-K-M) to plug directly into your logger.

Skip to search Skip to main content Skip to navigation

Contact

K Type Thermocouple Duplex Wire

PFA Insulated Thermocouple Wire

4,7

(37)

Cliquez et maintenez pour zoomer

Fiche technique (PDF)

C$481.02

Article# GG-K-24-SLE-500

Remises de volume disponibles

Calendrier de remise sur volume

Quantité	Prix unitaire
1-4	C$481.02
5-9	C$456.97
10-24	C$432.92
25-49	C$408.87
50-99	C$384.82
100+	C$360.77

Qté

Ajouté à votre panier

En stock

Délai de livraison (si pas en stock): 10 semaines

Ajouter à la liste des projets

Fil de thermocouple type "K" haute qualité
Idéal pour la fabrication des thermocouples
Disponible pour expédition immédiate
Choix d'isolation, diamètre du fil et longueurs standard
Disponible en tolérance IEC classe 1 ou classe 2
Conducteurs massifs ou toronnés

Voir Spécs

GG-K-24-SLE-500 Options de modèles

Voir tous les modèles

Modifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.

*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.

Temperature Min

Temperature Max

Temperature Range

Thermocouple Calibration Type

Wire Gauge

Conductor Insulation

Conductor type

Cable Length

Additional Feature

Cable Type

Overall Insulation

Number of Pairs

Overbraiding Type

Special Limit of error

Color Code Standard

Category

Temperature Unit

Specs

Modifier les options du modèles

Description

Code couleur IEC :Fil positif, vert ; fil négatif, blanc; ensemble, vert
OMEGA Engineering n'utilise pas le PFA ou PVC retraité dans la fabrication des fils thermocouples.

Veuillez utiliser le tableau ci-dessous comme guide pour les types disponibles. Le tableau "Pour commander" contient quelques examples de modèles courants. Veuillez utiliser le "Tableau constructeur de référence" (ci-dessous) pour obtenir les prix des autres modèles disponibles. Utilisez le tableau ci-dessous comme guide pour les différents types.

All Models

In Stock Only

passer en revue

Rated 5 out of 5 by JimboIndy from Holds up to elevated temperatures Purchased this wire about three weeks ago for an upcoming U.L. test. Insulation held up very well to temperatures of 600 to 800°F. I thought the test conditions, heat/grease/mechanical abuse, would destroy the thermocouples and that they would need to be replaced for each test run. I was wrong. They survived several test runs and are still usable.

Date published: 2017-08-04

Rated 5 out of 5 by CandiO from Easy & effiecient! I buy a superior quality wire from OMEGA and I am impressed with the ease of ordering.

Date published: 2016-03-01

Rated 3 out of 5 by roundup from Sturdy Extension Wire The wire was very solid which worked well for durability purposes. This feature made it difficult to properly connect the wire to miniature k-type connectors.

Date published: 2016-10-17

Rated 3 out of 5 by Too much from A bit overpriced.... A bit overpriced for the quality of the wire. It was not an easy product to work with.

Date published: 2017-06-06

Rated 5 out of 5 by Ricky from Excellent product Buy this from Omega all the time, never a problem.

Date published: 2018-01-02

Rated 5 out of 5 by Jacob01 from Exactly what I wanted Works great, exactly what I wanted. Welds extremely easy using normal thermocouple welder.

Date published: 2024-03-22

Rated 5 out of 5 by KimH from Wire Wire works just as expected. Pricing was good. Shipping was timely.

Date published: 2024-01-23

Rated 5 out of 5 by Lyann Yu from Buyer The wire has good performance applied on the cable assemblies.

Date published: 2023-12-29

PFA Insulated Thermocouple Wire Reviews - page 2

Manuals & Downloads

Fiche technique (1)

XC-K-TC-WIRE_spec

Conformité (1)

RoHS 2015/863 - Voir le certificat

Des Articles (1)

Fil à Thermocouple

Questions et réponses

HH-K-20-1000: What is the voltage rating

Asked by: JimC

Thank you for your inquiry. This item does not have a voltage rating because it is tray rated.

Answered by: CB Engineer

Date published: 2021-01-28

Can this wire be reused? If so, how many times? Going up to 1225°F.

Asked by: Gomez1018

Thank you for your request. This wire's insulation is rated for physical exposure up to 392°F.

Answered by: CB Engineer

Date published: 2019-10-18

How much is the response time for this Thermocouple TT-K-24-SLE-1000. We are using this TC for our machine. We'd like to know the response time of Thermocouple TT-K-24-SLE-1000.Thank you so much

Asked by: khanhvu Nikkiso VN

Thank you for your inquiry. Please review the following link for all information in regards to the response time of our thermocouples: https://www.omega.co.uk/temperature/Z/ThermocoupleResponseTime.html

Answered by: Application Engineer MC

Date published: 2023-04-24

Is tt-K-24S approved for use in UL508A enclosed industrial panels

Asked by: MikeN

Hi MikeN Thank you for the inquiry. This part# does not have a UL rating. Please check specific wire requirements and forward to TEMP@OMEGA.COM Best regards OMEGA

Answered by: NorwalkAE_RS

Date published: 2022-12-06

How can we strip the wires of GG-K-24S-1000? Is there any particular tool/stripping procedure available? My customer is using the normal wire stripper and the insulation also come off.

Asked by: RAJNe

Thank you for your inquiry. You will need to use a thermal wire stripper to remove insulation properly.

Answered by: Application Engineer CB

Date published: 2023-01-18

Is Omega able to calibrate thermocouples for us prior to shipment?

Asked by: jpvance

Hello and thank you for the asking this question. Yes, OMEGA can calibrate these for our customers prior to shipment. For more information on our calibration services check out this link https://www.omega.com/en-us/calibration-temperature-page

Answered by: ASEMO

Date published: 2022-12-19

What is Country of Origin for this part? TT-K-30-SLE-500 Model

Asked by: cute

TT-K-30-SLE-* has a country of origin of US.

Answered by: Application Engineer RD

Date published: 2022-11-22

Is GG-K-20S-50 RoHS-compliant?

Asked by: Hanistor

Hello, If the wire was ordered as GG-K-20S-50 then it will not be ROHS compliant. If ordered as GG-K-20S-50-ROHS then it would be made ROHS compliant.

Answered by: Engineer9

Date published: 2019-11-14

what is the resistance of k-type chromal- allumel wire per meter ?

Asked by: vijayasankar g

The Resistance will be affected by the gauge of the wire so can't answer. Please send your question to temp@omega.com and data sheets can be provided with the Resistance information.

Answered by: Applications EngineerANB

Date published: 2023-12-07

On the table inside the specs of this thermocouple, there's a column "Nominal Size". What are the units of that column? millimeters? inches?

Asked by: fzigunov

Thank you for your inquiry fzigunov. The unit of the Nominal Size column is inches.

Answered by: Application Engineer SP

Date published: 2021-06-10