Appelez-nous au 1-888-826-6342
Thermocouples Isolés Prêts à l'Emploi Avec Fils Dénudés
Ready-Made Insulated Thermocouples
Remises de volume disponibles
Calendrier de remise sur volume
Quantité | Prix unitaire |
---|---|
1-9 | C$200.76 |
10-24 | C$190.72 |
25-99 | C$180.68 |
100-499 | C$170.65 |
500-999 | C$160.61 |
1000+ | C$150.57 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- Fournis en paquets de 5
- Disponibles - expédition immédiate
- Isolation PFA, soie de verre ou Kapton
- Fils à diamètres de 0,8, 0,5, 0,25, 0,13 et 0,08 mm
- Fait de fil classe 1
- Longueurs standard de 1 m et 2 m
- Certificat de calibration traçable
5TC-GG-K-20-120 Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
* Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente ou cliquez sur le bouton CONFIGURER pour créer la vôtre.
Thermocouple Type
Process Temperature Max
Process Temperature Range
Cable Insulation
Cable Length
Color Code Standard
Wire Gauge
Additional Feature 2
Category
Process Temperature Unit
Process Temperature Min
Junction Type
Nominal Resistance
Accuracy
Number of Wires
Termination Connection Type
Pack Size
Description
Thermocouples à fils perlés disponibles avec isolation PFA, soie de verre ou Kapton, dans de multiples longueurs et jauges. Les conceptions les plus courantes sont indiquées dans le tableau "Pour commander" ci-dessous. Pour obtenir d'autres configurations, veuillez utiliser le Tableau Constructeur de référence ou contacter le service de ventes.
Rated 4 out of
5
by
Patrick from
Good quality, good service
Repeatedly buy thermal couples, happy will recommend to others
Date published: 2015-12-07
Rated 5 out of
5
by
Jhuffman from
Great for small applications
40awg works great for my small devices —- allowing me to get right to the spot I want to measure.
Date published: 2018-11-11
Rated 4 out of
5
by
Napabaker from
Nice Product
I purchased a package of 5 thermocouples. They arrived well packaged and, for someone who doesn't work w/thermocouples, the workmanship and insulation were very nice. I would definitely purchase this product from Omega again.
Date published: 2018-03-15
Rated 5 out of
5
by
Sharon from
Best Source
Easy to get; great price, discount offers , fast delivery
Date published: 2017-11-05
Rated 5 out of
5
by
alex208 from
Purchasing/Buyer
I'm happy with my purchase and the delivery time was great
Date published: 2017-08-21
Rated 5 out of
5
by
Harloid from
Excellent TC's
Excellent thermocouples, durable and directly integrate-able into all of our multiplexer systems. The connectors (separate purchase) make quick work of the bare wire for our handheld probes. Easy.
Date published: 2016-09-30
Rated 5 out of
5
by
CMAU from
Easy web page to navigate
Arrived within 3 days, as promised. Order complete and as ordered. I buy again from Omega
Date published: 2017-11-16
Rated 5 out of
5
by
Coil from
Good Thermocouples
Thermocouples were as described. Shipping was fast.
Date published: 2024-03-04
Can you please specify the outer diameter for 5TC-TT-T-36-72, 5TC-TT-T-40-72 and 5TC-KK-T-40-72
Thank you for your inquiry. OD of 5TC-TT-T-36-72 is 0.5 x 0.8 mm (0.019" x 0.030") and for 5TC-TT-T-40-72 it is 0.5 x 0.8 mm (0.017" x 0.026"). 5TC-KK-T-40-72 is not a valid part number.
Date published: 2023-07-28
What's the maximum Temp rating that this 5TC-TT-J-24-72 can be subjected to as to not melt the insulation?
Thank you for the inquiry. Max service temperature for the insulation is 500 F.
Best regards
OMEGA
Date published: 2020-07-03
What is the accuracy of 5TC-TT-K-36-72 ? The temperture range is 0 to 260 degree celsius for this thermocouple right?
Thank you for your question.
Yes, the temperature limits for the 5TC-TT-K-36-72 is 0-260C.
Date published: 2022-06-20
what is the max. diameter of 5TC-TT-T-36-36 wire?
Thank you for your inquiry. The cross section of 5TC-TT-T-36-36 wire is 0.5 x 0.8 mm (0.019" x 0.030").
Date published: 2023-01-31
We are looking for sensor with 80um bead dia (5TC-TT-*-40-** model). However, we need an accuracy of somewhere around 0.1degrees. Our temperature variation would range between 20-26 degreeC. Material would be agar-phantom. Suggest thermocouple type.
Thank you for your inquiry. Unfortunately, we do not have a thermocouple that can meet a 0.1°C accuracy.
Date published: 2023-07-12
What is the external diameter (cross-section) of 5TC-TT-K-330-36?
Thank you for your inquiry. 5TC-TT-K-330-36 is not a valid part number. If you are asking about 5TC-TT-K-30-36, the cross section for this part number is 0.6 x 1.0 mm (0.024" x 0.040").
Date published: 2022-11-11
Hi, for this kind of thermocouple wires that they have just a little part appeared, can i immerge them in liquid and solid phases of a solution or just liquid phase. If not, could you please suggest this kind of thermocouples for both phases? thanks
Thank you for your inquiry mouna1992. These thermocouple wires are great for solid phases but not great for liquid phases. We recommend getting an immersion probe or hermetically sealed thermocouple which would allow you to immerse the probe into the liquid state and still allow to take a measurement in the solid state. Here is the link for the first option: https://www.omega.com/en-us/temperature-measurement/temperature-probes/probes-with-lead-wires/p/TJC36. Here is the link for the second option: https://www.omega.com/en-us/temperature-measurement/temperature-wire-sensors/p/HSTC.
Date published: 2022-11-14
What is the accuracy of #TC-TT-K-36-36-ROHS?
Thanks for your question, being this is special limits of error K type thermocouple wire, it would be 1.1°C or 0.4%
Date published: 2020-10-02
what is the temp. range for 5TC-TT-T-24-72?
The temperature range for the 5TC-TT-T-24-72 would be –454 to 752°F or –270 to 400°C
Date published: 2020-10-16
Is this an UL listed thermocouple?
Thank you for your inquiry. No, this is not a UL listed thermocouple.
Date published: 2024-03-06
The process temperature range for 5TC-TT-T-36-72 Type T Thermocouples is listed as 0C to 150C. Is that accurate? I thought Type T thermocouples are typically rated for approximately -270 to 370C.
Thank you for your inquiry. Omega only tests for accuracy above 0 C, but type T thermocouples can measure down to -270 C. 150 C is the maximum temperature limit for the wire gage and insulation for this part number.
Date published: 2020-03-04
What is the minimum measurable temperature and the maximum sampling rate of the 5TC-TT-K-30-36?
Thank you for your inquiry. The minimum measurable temperature for accurate measurements for 5TC-TT-K-30-36 is 0 C (32 F). The sampling rate would depend on the reading device.
Date published: 2023-06-01
What is the best way to connect a fine thermocouple (K-type, AWG 40) to a data logger?
Thank you for your inquiry Ayoub. The type of data logger input determines whether you need a connector or just the stripped leads to connect the thermocouple to the logger. In terms of connectors, you can get a miniature connector like the SMPW or a standard connector like the OSTW. Please make sure that you check the temperature range of the connector before purchase.
Date published: 2022-11-14
What is the cross section of the 5TC-KK-K-24-144 wire? What is the cross section at the bead?
Hi MetzC,
Thank you for the inquiry. Cross sectional dimension is (0.050 x 0.075) inches. For details https://assets.omega.com/pdf/cable-and-wire/thermocouple-and-rtd-wire-and-cable/KK_WIRE.pdf
Weld bead diameter estimate is 2.5 x dia of the wire.
Best regards
OMEGA
Date published: 2023-01-30
How does resistance change with the length of thermocouples. What I mean is that, how accurate your readings are when you elongate thermocouples?
Thanks for connecting with Omega. Essentially the longer the wire the higher your resistance will be. However, based on how we gauge things here at Omega, the change in resistance becomes excessive if you are exceeding 100ohms or 100ft of wire. The diameter of the wire also plays a role in the resistance of the wire. The thicker the wire the less resistance it will carry. For more information you can always check out this link, https://www.omega.co.uk/temperature/Z/pdf/z049-050.pdf
Date published: 2019-06-19
I purchased 5TC-GG-J-36-36 which is fiberglass insulation and is rated 482 °C. I am using 350 °C, but the insulation becomes white in color and peels off which makes the reading from the thermocouple wrong. Why did this problem happen and how to fix it?
Thank you for your inquiry. This part number has a maximum process temperature of 315°C as stated. Thickness of the insulation is affects the maximum temperature capability of the sensor.
Date published: 2022-06-06
Two questions related to weight: Does the 5TC-TT-K-24-36 Ready-Made Insulated Thermocouple use the TT-K-24 Thermocouple Wire Duplex Insulated? If no, can you provide the weight information for the Ready-Made Insulated Thermocouple, please?
Thank you for your inquiry bs29. Yes, the 5TC-TT-K-24-36 thermocouple uses the TT-K-24 Thermocouple Wire.
Date published: 2022-11-10
What is the maximum diameter of the 5TC-TT-T-40-36 wire and the accuracy of the sensor?
Thank you for your inquiry. Thermocouple wire is double insulated meaning there's insulation on each individual conductor then it's wrapped in an overall insulation. Since the wire is double insulated it's not perfectly round it's oval shaped, giving dimensions 0.017" x 0.026". The sensor meets SLE standards so accuracy will be +/- 0.5C or 0.4% of reading, whichever is greatest.
Date published: 2023-01-31
What is the temperature range for 5TC-TT-T-20-72? Can it measure at -80℃? what is the maximum temperature? Then is this made up from special limit of error wire?
Thank you for your inquiry Lee1. The process temperature range of 5TC-TT-T-20-72 is 0 to 260 C (32 to 500 F) and this thermocouple is made from special limit of error (SLE) wire. It could measure -80 C but the accuracy for all the SLE thermocouples is not guaranteed for measurements below 0 C since it is non linear below 0 C.
Date published: 2022-08-01
Can we use Item# 5TC-GG-K-30-36 in vacuum?
Hi Nancy123,
Thank you for the request. This part# has glass fiber insulation. Glass fiber insulation will have some off gassing due to binders used. Type K is listed as limited use in vacuum environment.
Best regards,
OMEGA
Date published: 2023-04-06
I there any pressure limit on these wires? Can they be used in a chamber at high pressure?
Thank you for your inquiry. Unfortunately there are no pressure ratings for this product.
Date published: 2022-04-08
What is the overall diameter of the wire? What is the accuracy between 0 Celsius to 50 Celsius?
Thank you for your inquiry. The accuracy is ±0.5°C or ±0.4% of the actual value, use the greater tolerance of the two.
Date published: 2023-01-30
Reaction speed is not indicated for 5TC-TT-E-36-72. I would like to know the reaction speed when directly connected to an oscilloscope without a transducer.
Thank you for your inquiry. Please see link for response times which are based on the diameter of the wire. (0.005"). https://www.omega.com/en-us/resources/thermocouples-response-time
Date published: 2021-06-22
Can Omega provide an MSDS for the 5TC ready-made thermocouples with Fiberglass Insulation. Does the Fiberglass Insulation shed particles/debris? Any way to mitigate that shedding? What happens to the fiberglass >480C in a vacuum environment?
Thank you for the inquiry. Please forward these questions to TEMP@OMEGA.COM.
Best regards
OMEGA
Date published: 2023-08-21