Designed for applications where stainless steel may be required, the FLR1000ST Series flowmeters are rated to 500 psig. These units are available to cover flow ranges from 13 mL/min to 10 L/min. Not for use with Hydrogen or Helium. A 0 to 5 Vdc or 4 to 20 mA analog output is standard with all units; Voltage output models are also available with an additional pulse output, or with a 3 1/2 digit LCD readout.
SPECIFICATIONS Accuracy/Linearity: ±1% FS Repeatability: ±0.2% FS Pressure Rating: 34 bar (500 psig), maximum Operating Ambient: 5 to 55°C (41 to 131°F) Storage Ambient: 0 to 70°C (32 to 158°F) Temperature Sensitivity: = ±0.2% FS/°C Wetted Parts: 316 SS, epoxy, Pyrex® glass, PPS, FKM O-rings, sapphire bearings Filtration (Recommended): 25 microns or less Analog Output: Linear 0 to 5 Vdc or 4 to 20 mA; non-isolated signal Pipe Connections: 316 SS compression tube fittings, provided Electrical Connections: 4-pin male connector for both power and signal; included with 0.9 m (3') cable Power: Voltage Output Models: 11.5 to 12.5 Vdc (0.4 W @ 12 Vdc) Current Output Models: 18 to 24 Vdc (1.2 W @ 24 Vdc), 50 mA