BLMI Replacement Thermocouple Probes Deliver
Consistent, Superior Quality Through Automated Manufacturing
Bare lead mineral insulated BLMI replacement TC probes begin with OMEGA’s own high-purity magnesium oxide SLE grade thermocouple cable.
BLMI TC sensors are built and quality tested on our automated manufacturing cells.
OMEGACLAD™ mineral insulated MI thermocouple material is metal sheathed thermocouple cable that is cut, stripped, beaded, closed, potted, and tested by equipment designed and built in-house exclusively for these tasks.
Replacement TC probes are available in 6 inch (150 mm), 12 inch (300 mm), and 18 inch (450 mm) lengths. The cold end bare leads are 1.0 in. (25 mm) in length.The hot end junction can be selected as grounded, ungrounded or exposed. Contact sales for custom lengths or diameters. Connectors, accessories and other related options are listed below.
OEM quantity thermocouple sensor components can be shipped bulk as coiled or straight cut to length CTL with cold end stripped leads and hot junctions to match your tc probe specifications.
High Temperature Option BLMI probes are also available in a
high-temperature version. The cold end is potted using a ceramic cement
rated to 1200°C (2200°F). Add “-CC”
to the end of the probe part number and $5 to list price. (The actual
temperature rating of the probe is dependent upon the calibration,
sheath material, and probe diameter.)
“DUAL”Construction Option Also
available in a 4-wire construction (2 thermocouple junctions). Add “–DUAL”
to the end of the part number and consult sales for pricing.
Add "-CC" to end of part number for high temperature ceramic seal, and add $25 (U.S.) to the price. Add "-DUAL" to end of part number for dual-sensor option, and add $10 (U.S.) to the price.
(OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$) Ordering Example: (1) BLMI-304-T-116E-12 BLMI Probe with 1/16 in. (1.5 mm) 304 Stainless Steel Sheath, T calibration, exposed tip, 12 in. (300 mm) probe length., CAD35.50
Part Number Builder
Build Your Part Number Below
Sheath select from: 304 for 304 Stainless Steel INC for Inconel® 600 XL for Super OMEGACLAD™XL
Calibration select from: K for K J for J T for T E for E N for N
Sheath Diameter select from: 116 for 1/16 in. (1.5 mm) 18 for 1/8 in. (3 mm) 316 for 3/16 in. (4.5 mm) 14 for 1/4 in. (6 mm)
Junction Type select from: G for Grounded E for Exposed U for Ungrounded
Probe Length select from: 6 for 6 in. (150 mm) 12 for 12 in. (300 mm)
Note: All combinations may not be valid, check spec sheet for valid part numbers.