Conical tip for insertion into soft and semi-frozen material.
Made from 4.5mm (3/16") O.D. 304 SS. 300 mm (12") length,
grounded junction. Tip rated to 900°C (1650°F).
Fast Response Probe
Special reduced diameter 1.5 mm (1/16") tip designed for fast
response. Rugged 3 mm (1/8") O.D. 304 SS sheath. 300 mm
12") length, grounded junction. Tip rated to 900°C (1650°F).
Flexible Tip Surface Probe
Flexible tip conforms to most surfaces for fast, repeatable,
accurate measurements. Made from RTV silicone rubber for
good thermal contact. 6 mm (1/4") O.D. 304SS sheath. 300 mm
12") length, exposed junction. Tip rated to 260°C (500°F).
Note: subjecting sensor tip to temperatures above 315°C
600°F) will result in tip damage.
Exposed element protected by 4.5 mm (3/16") O.D. 304
sheath. Drilled end exposes bead to airflow for fast
measurements. Constant diameter for easy insertion or
mounting into duct work. 300 mm (12") length, exposed
junction. Rated to 870°C (1600°F).
All dollar amounts on this site are shown in Canadian currency.Note: Other lengths and diameters are also available. Consult Custom Engineering for details. Ordering Example: (1) HPS-RT-K-18G-12 reduced tip fast response probe, type K, integral handle style, CAD75.00
Part Number Builder
Build Your Part Number Below
Handle Type select from: QD for Quick Disconnect HPS for Integral Handle
Probe Type select from: NP for Penetration Probe FSP for Flexible Tip Surface Probe RT for Fast Response Probe AP for Air Probe
Calibration Type select from: J for Type J K for Type K E for Type E T for Type T
Sheath Diameter select from: 316 for 3/16 Inch for NP & AP 14 for 1/4 Inch for FSP 18 for 1/8 Inch for RT
Thermocouple Junction select from: G for Grounded for NP & RT E for Exposed for FSP & AP
Note: All combinations may not be valid, check spec sheet for valid part numbers.