Cart  |  Contact  |  Help  |  Francais  | 
1-888-826-6342  | 

Your Source for Process Measurement & Control

SCR Power Controllers for Electrical Resistance Heaters

SCR19 and SCR39 Series

SCR Power Controllers for Electrical Resistance Heaters | SCR19 and SCR39 Series

SCR Power Controllers for Electrical Resistance Heaters

CAD410.00 SCR19Z-24-040

2 year warranty
  • Zero Crossing or Phase Angle Fired
  • Single or Three Phase Load Switching
  • Extends Heater Life Reduces Thermal Shock
  • No Maintenance All Solid State Components
  • Close Control of Low Mass Heaters
  • Phase Angle with Soft Start for High Inrush Heaters
  • No Relay Noise Contact Arc Noise Eliminated
  • Semiconductor I2T Fusing
  • Optically Isolated Control Signal Input
Temperature and Process Controllers and Power Switching Devices - View related products


The SCR19 Series Power Controllers are designed to proportion electric power to resistive loads only, such as ovens, furnaces, heat sealers, etc. (NOTE: They are not designed to drive transformers or any inductive load.) The controllers consist of power semi-conductors (SCRs), properly-sized heat sinks, trigger circuitry, and fuses supplied on panels for surface mounting. The power controller accepts a 4 to 20 mA dc output from a temperature controller or can be supplied with manual option using a remote potentiometer.

The SCR19 Series controllers offers two methods of proportional control – Zero-voltage-switched and Phase-angled-fired. With the Zero-voltage-switching mode, the controller switches on complete cycles of the ac supply voltage. The trigger circuit is designed to turn on the SCRs as close as possible to the point where the AC sine wave crosses through zero. In effect, the line voltage is turned on and off and applied to the heaters in whole cycles. With an input of 4 to 20 mA, the output will be off below 4 mA and full on at 20 mA. Proportioning action is obtained by varying the number of cycles on to the number of cycles off. The output will vary from one cycle on and nine cycles off at low input, to all cycles on at maximum input. This output is integrated by the heaters which produce a smoothly proportioning heat output that varies directly with the input signal. With the Phase-angle-fired mode, the power to the load is controlled by governing the point of turn on (firing) of each half cycle of the full AC sine wave.
Place Order(Specify Model Number)

What Other People Bought: When you see this icon, click on it to expand a list of products that other people have bought when they purchased this model.


Most Popular Models!

Part Number/ Desc.
Click to expand/minimize a list of what others bought with theSCR19Z-12-040
SCR19Z-12-040 Star
Availability: In Stock
SCR, Zero-Voltage-Switching, 120V, 40A
Click to expand/minimize a list of what others bought with theSCR19Z-24-040
SCR19Z-24-040 Star
Availability: In Stock
SCR, Zero-Voltage-Switching, 240V, 40A
SCR19Z-48-040 Star
Availability: In Stock
SCR, Zero-Voltage-Switching, 480V, 40A
SCR19Z-24-060 Star
Availability: In Stock
SCR, Zero-Voltage-Switching, 240V, 60A
SCR39Z-24-060 Star
Availability: In Stock
SCR, 3-phase, Zero-Voltage-Switching, 240V, 60A
SCR39Z-48-060 Star
Availability: 3 weeks
SCR, 3-phase, Zero-Voltage-Switching, 480V, 60A
SCR19P-24-040-S15 Star
Availability: In Stock
SCR, Phase-Angle-Switching, 240V, 40A, 15 sec soft start circuit
SCR19P-24-080-S9 Star
Availability: 4 weeks
SCR, Phase-Angle-Switching, 240V, 80A, 9 sec soft start circuit
Click to expand/minimize a list of what others bought with theSCR-210A015U01
SCR-210A015U01 Star
Availability: In Stock
Replacement Fuse, 40 A
SCR-210A012U01 Star
Availability: In Stock
Replacement Fuse, 60 A
SCR-210A014U01 Star
Availability: In Stock
Replacement Fuse, 80 A
SCR19Z-M Star
Availability: 4 weeks
Manual remote pot for 120V SCR19/39 models
SCR19Z-M-220 Star
Availability: 3 weeks
Manual remote pot for 240V SCR19/39 models
SCR19Z-M-480 Star
Availability: In Stock
Manual remote pot for 480V SCR19/39 models

Order By Part Number

Part Number
Part Number

All dollar amounts on this site are shown in Canadian currency. Note: Comes with complete operator’s manual
Ordering Example: (1) SCR19Z-24-040 SCR, Zero-Voltage-Switching, 240V, 40A, CAD410.00

Part Number Builder

Build Your Part Number Below
Option Descriptions:

(1) Single or 3 Phase select from:
1 for Single Phase
3 for 3 Phase

(2) Method select from:
Z for Zero-Voltage Switching
P for Phase-Angle Firing

(3) Voltage select from:
-02 for 24 Vac for single phase only
-12 for 120 Vac for single phase only
-20 for 208 Vac for phase angle firing
-24 for 240 Vac
-48 for 480 Vac

(4) Current select from:
-040 for 40 Amps
-060 for 60 Amps
-080 for 80 Amps

(5) Phase-Angle Firing Items select from:
for Zero-Voltage Switching leave field blank
-S9 for the STANDARD Soft start 9 seconds
-S15 for Soft start 15 seconds
-S30 for Soft start 30 seconds
-S60 for Soft start 60 seconds
-S120 for Soft start 120 seconds
-V for Voltage limit
Note: All combinations may not be valid, check spec sheet for valid part numbers.