Ideal for OEM Applications, Off the Shelf
Available in Class-A, Class-B & 1/3 DIN Accuracies
Temperature Range: -70 to 500°C (-94 to 932°F)
Available in 100, 500 & 1000 Ω Configurations
Resistance per IEC/DIN 60751
Faster Response than Most Wire Wound Elements
Click here for a printable brochure.
Temperature Sensor Manufacturing by OMEGA™ Thermocouples, RTD's, and More
Our commitment to maintaining the leading edge through research development and state-of-the art manufacturing keeps OMEGA firmly at the forefront of technology. OMEGA's Development and Engineering Center (ODEC), located on the Connecticut campus, is home to OMEGA's design and engineering laboratories. All product designs are tested and perfected here prior to marketing. This state-of-the-art facility houses OMEGA's metrology lab and other quality control facilities. The testing that takes place here assures that you receive the best products for your applications. Once an OMEGA product design is perfected and tested, stock production takes place at our Bridgeport, New Jersey, manufacturing plant.
Located just 22 miles from Philadelphia, this site houses OMEGA's advanced OMEGACLAD ® thermocouple wire production equipment along with an Award Winning Class 10 Clean Room for RTD Element manufacturing and a host of other computerized CNC milling machines, injection molding equipment, screw machines, braiders, extruders, punch presses and much, much more.
OEM (Original Equipment Manufacturer)
Omega Engineering, the leader in temperature sensor manufacturing, continues to offer new product opportunities to the OEM. Omega provides the best price, highest quality, and off the shelf solution to meet the unique requirements of the OEM. Omega understands the need to be completive in today's global environment. Contact our OEM sales representatives today for a quote in RTD elements or probes, thermocouples, thermistors or a custom solution at
Design and Custom Engineering
Omega Engineering proudly offers the most sophisticated and extensive Custom Engineering capabilities in the process measurement and control industry. Our custom manufacturing capabilities extend "beyond the handbooks," and reinforce our customer service/customer driven philosophy. Whether you need a simple modification of a standard product or complete customized system engineering, OMEGA can accommodate your special request.
Please visit our Custom Engineering section
Temperature Sensors Manufactured by Omega Engineering
Thin Film Platinum RTD Elements
Thin Film DIN Class B Elements
Surface RTD 3-Pack
Flexible RTD Sensors
General Purpose RTD (PT100) Probes
Thermistor Elements, Probes & Assemblies
See all Temperature Products...
Technical Reference Links
Introduction to RTDs
About RTD Sensors
RTD Selection Guide
Resistance Elements & RTDs
History of RTDs
Introduction to Thermocouples
Thermocouple Probe Time Response Study
Themocouple Reference Guide
Introduction to Thermistors
See all Temperature Links...
RTD (Resistance Temperature Devices) Platinum Thin Film Elements
OMEGAFILM™ elements are manufactured to meet the requirements of IEC Standard 60751. This standard uses "Classes" to define the accuracy and interchangeability for the elements, the basic resistance vs. temperature characteristics, temperature ranges and other technical information relating to the OmegaFilm™ RTD elements.
Class A = ±(0.15 + 0.002t)
(-200 to 650°C)
Class B = ±(0.30 + 0.005t)
(-200 to 850°C)
Class 1/3 DIN = ±1/3 (0.30 + 0.005t) t = Temperature °C
(0 to 200°C)*
*Note: Since there are no temperature ranges for 1/3DIN and 1/10DIN, typical industry standards have been assigned.
There are two accuracy "Classes" defined in IEC60751, they are: "Class A" and "Class B", there are other "Classes" not specified in IEC60751 that are used in industry, they include 1/3 DIN and 1/10 DIN.
These "Classes" are defined in Table 1.
RTD Probes and Assemblies
OMEGA offers a wide variety of probes in various configurations. The RTD probe is the most rugged form of RTD. A probe consists of an RTD element mounted inside a metal tube, also known as a sheath. The sheath protects the element from the environment.
Omega is the leader in thermocouple manufacturing! Omega offers standard and custom thermocouple configurations to meet the needs of all your temperature measurement applications. Omega makes it easy to configure a custom probe by providing you with our
. If your project is more complex, our
department can help.
The standalone thermistor element is relatively fragile and can not be placed in a rugged environment. OMEGA offers thermistor probes which are thermistor elements embedded in metal tubes. Thermistor probes are much more suitable for industrial environments than thermistor elements.
Back to Top
© Copyright 2003-2018
| OMEGA ENGINEERING, Inc. | OMEGA