PST joins DwyerOmega. Read more>
Spring Loaded Fittings for 1/4" Diameter Probes
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-9 | C$51.45 |
| 10-49 | C$48.88 |
| 50-99 | C$46.82 |
| 100-999 | C$43.73 |
| 1000-4999 | C$41.16 |
| 5000+ | C$38.59 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Easy Installation on Any ¼" Diameter Probe (RTD, Thermcouple or Thermistor)
- Self Gripping Spring Design Allows Unlimited Adjustability
- Great For Installing Replacement Sensors in Thermowells
- Spring Loaded Fitting Can be Used with a Wide Variety of ½ NPT Connection Heads
1/4-SLK Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Length
Material
Process Connection
Inner Diameter
These spring loaded fittings provide another easy way to utilize your Omega temperature sensors.
For example:
Do you need to install a 1/4" diameter sensor in a thermowell without the use of a connection head? Install the 1/4-SLK spring loaded fitting onto your sensor to insure proper contact with the bottom of your thermowell without worrying if your sensor is over inserted or under inserted into the thermowell bore.
If you need to install your sensor in a thermowell while also using an enclosure for your wire connections, the SLF-12-12-14 spring loaded fitting can be used along with one of our extensive line of sanitary or industrial connection heads. Did you have a sudden failure and need to replace your thermowell mounted RTD or thermocouple? If you have one of our cuttable RTD Sensors or Thermocouple sensors, just cut the sensor to length, add a spring loaded fitting and you are up and running.
Installation is simple with no tools required, simply do the following:
To install the single sided ¼-SLK fitting, slide the hex housing onto your probe with the 1/2 NPT threads pointed toward your thermowell or other suitable attachment point. Slide the self-gripping spring onto your probe with the wide end toward the hex housing and slide into place. The position of the assembly can then be adjusted as needed.
For the SLF12-12-14, slide the probe tip into the larger opening end of the fitting, twist the probe clockwise while pushing the probe through the fitting. Install the probe to the desired length, if needed the probe can be pulled through to re-adjust the position of the fitting.
Specifications:
Materials: 300 Series Stainless Steel. Mounting Threads: The 1/4-SLK has a 1/2NPT threaded connection one end, the SLF-12-12-14 has a 1/2NPT threaded connection both ends. Sheath Size: The springs used in these fittings are a self gripping design for use on standard 1/4" sheaths. Spring Compression: These springs are designed for a nominal compression of approximately 1/2". Spring material: 0.035" diameter music wire (ASTM A228)
For example:
Installation is simple with no tools required, simply do the following:
Specifications:
Having issues with installing our exposed junction probes in the SLF-12-12-14. Seems like they are getting caught up on the spring before they can come out. Any tips to get them installed?
You would need to make sure the exposed end portion is within the perimeter of the probe OD then insert it very straight through the spring with extreme care.
Date published: 2024-04-18
Does the SLF-12-12-14 Leak with the probe installed? Is there a sealed cap?
Thank you for your inquiry. This does not provide a sealed connection with a probe.
Date published: 2020-11-10