Please add to cart to keep it or exit the configuration
Terminal Blocks and Lugs
DIN Rails, 35x7.5 mm & 35x15 mm, Standard and Pre-Cut Lengths
DRTB-RAIL
DRTB-Rails enhances capabilities, accepted throughout the world, allowing the mounting a variety of control components, devices & terminal blocks
C$7.50
Barrier Strips, Thermocouple Spade Lugs and Terminal Lugs
TL-SL-BSJ
Barrier Strips, Thermocouple Spade Lugs and Terminal Lugs, Complete with Color-Coded Calibration Type Terminal Lugs Installed, Accepts Wire from 24 AWG to 16 AWG
C$18.75
Feed Through & Ground Terminal Blocks, 600V Rated,
YBK
YBK Series feed through terminal blocks are tension clamp connection style and are DIN rail mounted, 600V Rated, UL 94 V2 Polyamide 6.6 750/600V up to 63A.
C$2.10
Thermocouple DIN Rail Terminal Blocks, Narrow 10.7 mm Width
DRTB-2
DRTB-2 Series thermocouple terminal blocks, manufactured with thermocouple-grade alloys guarantee accurate readings, SMP-compatible female miniature thermocouple connector.
C$205.00
in 4 weeks
STANDARD TERMINAL BLOCK RELAYS, 6.2 mm (0.24") Wide
XRU1D
The XRU1D power terminal block has the same shape as the relay modules and is used to feed in the bridging potentials. The nominal current is 32 A.
C$27.50
DIN Rail Terminal Blocks - Feed Through Terminal Blocks
OMTBV7-W3-W4-W6
Omega’s OMTBV7-W terminals are designed to meet the three most important criteria when selecting a terminal block line – ease of wiring, secure connections and durability.
C$109.00
in 2 weeks
DIN Rail Fuse Terminal Blocks for 5x20mm Fuse, Single Circuit
OMTBV7-WFB
Fuse terminal blocks provide a convenient way to add fuses to your DIN rail wire panels. The fuse blocks accept 5 x 20 mm fuses and are rated up to 300V and 15A.
C$201.00
in 2 weeks
AVK Series Feed Through DIN Rail Mounting Terminal Blocks
AVK
AVK Series Feed Through Terminal Blocks offer savings cost, space and time, mount on standard 35 x 15mm and 35 x 7.5 mm DIN rails & are design to meet world wire standards.
C$3.60
in 4 weeks
DIN Rail Mounting Ground Terminal Blocks, #22 to #2/0AWG
OMTBV7-WG
Ground terminal blocks mechanically and electrically connect wires to the DIN rail by using a metal clamping bar. In this way, the DIN rail can function as a ground bus bar.
C$346.00
in 2 weeks
DIN Rail Fuse Holders, 1, 2, & 3-Pole, With Blown Fuse Indication
ASK-FUSEHOLD
ASK Series, DIN rail mounted fuse holders provides circuit protection for industrial control system, fuse styles are supported: 14x51 mm (ASK 6) and 10x38 mm (ASK 4).
C$74.00
Circuit Breakers for Branch Circuit Protection
UL489
The UL 489 Series miniature molded case circuit breakers are DIN rail mountable and provide feeder and branch circuit protection per UL 489, 17.5 mm (0.69") Width per Pole.
C$40.00
in 2 weeks
Sensor & Multi-Level DIN Rail Terminal Blocks Screw Connection.
PIK-PUK
PIK-4N terminal blocks allows 2 level feed through connections, the PIK-4NK has an internal connecting bridge for common feeds that allow for one-in & three-out connections.
C$11.50
in 6 weeks
Thermocouple Terminal Blocks and Sensor Terminal Blocks
OMTBV7-WTC
OMTBV7-WTC3 series thermocouple terminal blocks are offered in Type K, J, T and E. The terminal block contacts are made with thermocouple-grade calibration alloys.
C$191.00
in 2 weeks
DIN Rail Mount Circuit Breakers, 17.5 mm (0.69") Width per Pole
R-Series
R Series UL1077 supplementary protectors are made to trip faster than a standard UL489 circuit breaker, therefore providing additional protection for specific devices
C$18.25
in 2 weeks
High Current Terminal Blocks, Width 25mm (0.98in), up to 232A
XBUK-HighCurrent
XB Series offers complete terminal block system with accessories, marking, bridging & testing accessories are standardized across technologies, Green/Yellow.
C$46.50
in 2 weeks
Thermocouple Terminal Blocks Type K, J, E, T, R
XBTK
Thermocouple terminal blocks are offered in Type K, J, T, E and R/S. The terminal block contacts are made with thermocouple-grade calibration alloys.
C$14.00
Round Terminal Blocks, -29 to 220°C Temperature Rating
CH62
OMEGA's color-coded CH series terminal blocks are designed to fit metal-sheathed cable or probes between 1.5 and 6 mm (1/16 and 1/4") in diameter.
C$12.75
in 5 days
Terminal Blocks for Connection Heads, Ceramic or Bakelite
CH-TERMINAL-BLOCKS
CH-TERMINAL-BLOCKS, Terminal Blocks for OMEGA Connection Heads, for Single and Duplex Elements, in Ceramic or Bakelite, and a wide variety of fittings
C$8.80
Double and Triple Level Feed-through or Sensor Terminal Blocks
XBUTT-XBUK-DBLTRPL
The XBUTT double-level terminal blocks reduce space requirements by 50% over single-level terminal blocks. These terminal blocks are suitable for 2-wire RTD connections.
C$5.50
Feed Through Spring Cage Terminal Blocks Fuse Holder
XBPT
The XB Series offers a complete terminal block system with a universal range of accessories, operating temperatures up to 125°C, made of Polyamide 6.6.
C$3.10