Call us at 1-888-826-6342
Call us at 1-888-826-6342
The TC-08 is an 8 channel USB thermocouple data acquisition module. Accepts multiple TC types and has automatic cold junction temperature compensation.
View Full SpecificationsD8000 Series can measure process inputs, thermocouples, and contact closures and generate current or voltage signals. USB interface communicates via MODBUS RTU.
View Full Specifications16 differential or 32 single ended analog inputs expandable to 32/64. TC or Voltage input. High resolution 24-bit and high sample rate 1kS/S.
View Full SpecificationsMeasures up to 16 analog thermocouple or voltage inputs. High speed up to 1kS/s sampling with 24-bit resolution. 8x digital I/O, two counters. Connects via USB.
View Full Specifications8-Channel Simultaneous Analog Input USB Data Acquisition Modules
View Full SpecificationsThe OM-USB-TC Series have either thermocouple or voltage input options. The OM-USB-5201 has datalogging capability. 24-bit resolution and software programmable TC types.
View Full SpecificationsD1000-D2000 Series transmitters have universal inputs for thermocouple, RTD, voltage, current, pulse/frequency and bridge inputs. Converts to RS-232C or RS485 Interface.
View Full SpecificationsDirectly connects TC, RTD, Thermistor, Bridge, Process, Resistance, Accelerometer system. Expandable to over 1k channels. Analog & Digital outputs. USB Hardware interface
View Full SpecificationsThe OM-USB-1608G series are 16 SE/8 DIFF input USB DAQ modules. High speed (up to 500kS/s) and high resolution (16-bit). 8x digital I/O, 2x counters, opt. analog output.
View Full SpecificationsThe OME-ET/PET-7000 Series is a web based ethernet I/O module that accepts thermocouple, RTD, voltage/current inputs. Built-in web-server and supports Modbus TCP and UDP.
View Full SpecificationsThe OM-USB-1208HS series are high speed (up to 1MS/s) voltage input USB data acquisition modules with analog output options available. 4/8 differential/single ended inputs.
View Full SpecificationsTC and Process Inputs. Low power design requires no external power or batteries. High resolution, high sample rate. Multi device support via USB hubs. Digital calibration
View Full SpecificationsConnects a PC to sensors and controls via analog and digital inputs and outputs via Windows® software. 16SE/8DI voltage input channels. Universal inputs.
View Full SpecificationsThe OM-USB-1208FS is a 12-bit resolution 8 input voltage input USB DAQ module. The OM-USB-1408FS & OM-USB1608FS are 14-bit and 16-bit resolution, respectively.
View Full SpecificationsThe OM-NET-TC has eight isolated 24-bit differential thermocouple inputs with 4 S/s maximum sample rate. Integrated CJC sensors and open sensor detection. 8x Digital I/O.
View Full SpecificationsThe OM-USB-TC Series have temperature or voltage input options. Accepts thermocouple, RTD, thermistor, or semiconduction temp sensors. Software programmable input types.
View Full SpecificationsThe OM-DAQ-USB-2401 is a thermocouple or voltage input USB data acquisition module. Accepts 8 differential or 16 single ended inputs. 24-bit resolution and 1kS/s.
View Full SpecificationsD5000 Series interfaces have four channel inputs (process, thermocouple input, or thermistor) and convert to RS-232 or RS-485 digital output. ASCII format.
View Full SpecificationsThe HFS-DAQ accepts 8 differential input channels of both heat flux and temperature from 4 HFS sensors. Free PC software and USB interface. High accuracy.
View Full SpecificationsThe OM-USB-3100 Series provides 4, 8, or 16 voltage outputs and has 32 event counter inputs. 16-bit resolution and 100S/s sample rate with 8 digital I/O.
View Full Specifications