Water Quality Sensors

The PHE-7352-15 is a combination pH sensor designed for insertable use in process and waste water applications where greater pipeline penetration is required.

Alpha® Series Rugged Gel-Filled Electrodes

Conductivity Cells

OMEGA pH and ORP differential probes stay in service and provide accurate measurements. These probes come with an integral encapsulated 4 to 20 mA 2-wire transmitter.

The OMEGA's PHE/ORE-6510B submersible electrodes are designed for use in drums, open tanks and streams. The flat sensing surface minimizes fouling.

The PHE-7357 sensor is designed for use in most water and waste water applications. The large reservoir of reference electrolyte and PTFE liquid junction assures a long life.

The PHE-7151 combination electrodes are ruggedly constructed

Conductivity or Resistivity Sensor

The PHE/ORE-5460 in-line pH and ORP electrodes feature a flat self-cleaning abrasion-free surface. When exposed to turbulent flow, the scrubbing action cleans the electrodes.

OMEGA offers pH electrodes with integral preamplifiers for laboratory or industrial applications and can interface with equipment that accepts a millivolt input signal.

OMEGA Engineering offers a complete line of laboratory pH electrodes. The PHE-4200 Series are gel-filled, combination pH electrodes in five electrode styles to choose from.

The high temperature insertion type electrode is designed for periodic exposure to steam sterilization or continuous high temperatures rated up to 135°C.

The PHE-6820B electrode and assembly features a retractable design for insertion into tanks. It allows the electrode to be removed without shutting the system down.

The PHE/ORE-6510 Series submersible electrodes are designed for use in drums, open tanks and streams. The flat sensing surface and reference junction minimizes fouling.

Epoxy dip-style Conductivity Sensor

OMEGA is pleased to offer the ALpHA® Series of pH electrodes. The special internal design allows rapid, stable readings to be taken even during large temperature shifts.

The PHE-7451-15 is a combination pH sensor designed specifically for insertable use in process and waste water applications.

The retractable Lock-N-Load sensor assemblies are all you need to install a pH or ORP electrode into any pipeline without interrupting the process.

Omega's ISE-8700 high sensitivity ion-specific electrodes can measure down to 6.4 x 10 -4 PPM. Ion electrodes include: Fluoride, Copper, Potassium, Chloride and Sodium.

Twist Lock Industrial Combination electrode features a non-fouling annular ceramic junction and an electrode housing of PVDF construction with 316SS locking pins.