Call us at 1-888-826-6342.
1/8 DIN 4 and 7 Channel Universal Process Ramp & Soak Controllers
1/8 DIN 4-Zone & 7-Zone Temperature/Process Controllers with Ramp/Soak Capability
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-4 | C$961.46 |
| 5-9 | C$913.39 |
| 10-24 | C$865.31 |
| 25-49 | C$817.24 |
| 50-99 | C$769.17 |
| 100+ | C$721.10 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- 1/8 DIN Cutout
- ON/OFF and Full PID Control
- Independent 7-Segment Ramp/Soak Profile for Each Zone
- Programmable Heating or Cooling Outputs
CN1504TC Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Measurement Type
Control Outputs
Number of Inputs
Input Type
Supply Voltage Type
Display Type
Output Type
Form Factor
Ramp and Soak
Description
The CN1500 series is a compact unit that offers the features of up to seven controllers in a single 1/8 DIN enclosure.Careful design, high functionality and compactness allow it to offer the best cost/performance ratio of any controller in its class. The input type for each zone is selected independently. Scaling and offset allow current and voltage signals to be converted and displayed in engineering units. Temperature can be displayed in Centigrade or Fahrenheit.
Each zone has its own ramp/soak profile with up to 7 segments. ON/OFF as well as PID control is offered for optimum process stability. Processes that do not require tight control through complex tuning of PID parameters can be run under simple ON/OFF control. Each zone has its own set of ON/OFF and PID parameters and each zone can be programmed for heating or cooling. Setpoint deviation, positive as well as negative, can be viewed.
Additional functions include min/max reading for each zone, indefinite program hold, automatic scanning and displaying of different zones and three display modes (setpoint only, process only or both setpoint and process). Power, control, and process signal connections are conveniently made with Euro-style plug-in connectors.
Each zone has a three-digit long engineering label that can be programmed to indicate the type of process being controlled, e.g., °C or °F for temperature, PSI for pressure, etc. Every controller’s output status is indicated by LED’s. Channel-to-channel scan time is also programmable.
Are the thermocouple inputs configured for bare wires or thermocouple plugs (standard or mini)?
Thank you for your inquiry. This instrument is configured to accept stripped leads and has a screw terminal block on rear of unit. Please refer to the online manual for more details.
Date published: 2020-04-30