Call us at 1-888-826-6342
Call us at 1-888-826-6342.
Accelerometer, Premium Grade, Low Profile
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-9 | C$598.67 |
| 10-24 | C$568.74 |
| 25-49 | C$556.76 |
| 50-99 | C$532.82 |
| 100-199 | C$520.84 |
| 200+ | C$508.87 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
ACC797 Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Acceleration Range
Frequency Range (Nominal)
Output Type
Mounting Type
Features
The OMEGAROMETER™ accelerometer is designed for industrial vibration measurements. This accelerometer features a hermetically sealed 316L stainless steel case suitable for harsh environments. The ACC797 is a premium grade accelerometer with a low profile side cable exit.
SPECIFICATIONS:
DYNAMIC
Sensitivity, ±5%, 25°C (77°F): 100 mV/g
Acceleration Range1: 50 g peak
Amplitude Non-Linearity: 1%
Frequency Response:
±5%: 3 to 5000 Hz
±10%: 2 to 7000 Hz
±3 dB: 1 to 12,000 Hz
Resonance Frequency: 26 kHz
Transverse Sensitivity, Max: 5% of axial
ELECTRICAL
Power Requirement:
Voltage Source: 18 to 30 Vdc
Current Regulating Diode1, 2: 2 to 10 mA
Electrical Noise, Equiv. g:
Broadband: 2.5 Hz to 25 kHz: 600 µg
Spectral:
10 Hz: 8 µg/√Hz
100 Hz: 5 µg/√Hz
1000 Hz: 5 µg/√Hz
Output Impedance, Max: 100 Ω
Bias Output Voltage: 12 Vdc
Grounding: Isolated case, internally shielded
ENVIRONMENTAL
Temperature Range: -50 to 120°C (-58 to 248°F)
Vibration Limit: 500 g peak
Shock Limit: 5000 g peak
Electromagnetic Sensitivity, Equiv. g: 30 µg/gauss
Base Strain Sensitivity: 0.002 g/microstrain
PHYSICAL
Weight: 135 g (4.8 oz)
Case Material: 316L SS
Mounting: ¼-28 screw
Output Connector: 2 pin, MIL-C-5015 style
Connections:
Pin A: Power/signal
Pin B: Common
Mating Connector: Amphenol 97-3106A- 10SL-4S type
Recommended Cabling: ACC-CB7-10
SPECIFICATIONS:
DYNAMIC
Sensitivity, ±5%, 25°C (77°F): 100 mV/g
Acceleration Range1: 50 g peak
Amplitude Non-Linearity: 1%
Frequency Response:
±5%: 3 to 5000 Hz
±10%: 2 to 7000 Hz
±3 dB: 1 to 12,000 Hz
Resonance Frequency: 26 kHz
Transverse Sensitivity, Max: 5% of axial
ELECTRICAL
Power Requirement:
Voltage Source: 18 to 30 Vdc
Current Regulating Diode1, 2: 2 to 10 mA
Electrical Noise, Equiv. g:
Broadband: 2.5 Hz to 25 kHz: 600 µg
Spectral:
10 Hz: 8 µg/√Hz
100 Hz: 5 µg/√Hz
1000 Hz: 5 µg/√Hz
Output Impedance, Max: 100 Ω
Bias Output Voltage: 12 Vdc
Grounding: Isolated case, internally shielded
ENVIRONMENTAL
Temperature Range: -50 to 120°C (-58 to 248°F)
Vibration Limit: 500 g peak
Shock Limit: 5000 g peak
Electromagnetic Sensitivity, Equiv. g: 30 µg/gauss
Base Strain Sensitivity: 0.002 g/microstrain
PHYSICAL
Weight: 135 g (4.8 oz)
Case Material: 316L SS
Mounting: ¼-28 screw
Output Connector: 2 pin, MIL-C-5015 style
Connections:
Pin A: Power/signal
Pin B: Common
Mating Connector: Amphenol 97-3106A- 10SL-4S type
Recommended Cabling: ACC-CB7-10
CE Approved
UKCA
How do you read this? do you have instructions on how to collect the data output?
The ACC797 is an accelerometer designed for industrial vibration measurements. It is single part of the complete system which would basically consist of the ACC797. An output cable from the accelerometer (part# ACC-CB7-10) to a constant current power supply (part# ACC-PS3) and an output coaxial cable from the power supply something like a high speed data acquisition system to read the data.
Date published: 2021-02-16
Accessories
