Your feedback matters, take a quick surveyWebsite feedback
LVIT Linear Position Sensors for Low Ranges
2 to 5 mm, 1 to 9 Vdc Output
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-9 | C$790.89 |
| 10-24 | C$751.35 |
| 25-49 | C$735.53 |
| 50-99 | C$703.89 |
| 100+ | C$688.07 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Inductive Technology for Sensing Metal Targets
- Insensitive to Dust, Dirt, and Oils Ideal for Industrial Applications
- Compact Design
LD701-2/5 Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Range
Linearity
Housing Length
Housing Diameter/Width
Electrical Output
Rating
Features
Non-contact linear sensors have an analog output that is proportional to the damping target distance. Their compact yet sturdy design makes them well-suited for industrial, robotics and laboratory use. These sensors utilize inductive technology, which means they are capable of sensing any metal target. The sensing distance, however, is influenced by the metal target. Ranges are calibrated using a standard square target. The target is mild steel (Fe 360), 1 mm (0.04') thick. The side lengths are the larger of either the sensor’s face diaphragm or three times the sensing distance.
SPECIFICATIONS
Excitation: 14-30 Vdc @ 20 mA; unregulated, reverse polarity and short circuit protected
Output: 1-9 Vdc
Output Load: 20 mA max
Repeatability: 0.01 mm (0.0004')
Compensated Temp.: 0 to 60°C (32 to 140°F)
Total Thermal Effects: 1µm/°C/mm
Housing: Nickel-plated brass
Electrical Conn.: 1.8 m (6 ft), 3-cond. 22 AWG pigtail leads (20 AWG for 30 mm)
SPECIFICATIONS
Excitation: 14-30 Vdc @ 20 mA; unregulated, reverse polarity and short circuit protected
Output: 1-9 Vdc
Output Load: 20 mA max
Repeatability: 0.01 mm (0.0004')
Compensated Temp.: 0 to 60°C (32 to 140°F)
Total Thermal Effects: 1µm/°C/mm
Housing: Nickel-plated brass
Electrical Conn.: 1.8 m (6 ft), 3-cond. 22 AWG pigtail leads (20 AWG for 30 mm)
Will this transducer be able to measure the changing gap of a ellipse-like surface as it rotates? the surface in question is presently being designed, so we can accommodate the appropriate width and height.
These sensors should work for measuring an ellipse rotating surface. Please note that the switching frequency of the sensor is 1000 Hz
Date published: 2024-04-05
Hello, We looking to use LD701-2/5 for gap measurements in high rpm (up to 100,000 rpm) rotating machines. What is the excitation frequency of the sensor coil. Thank you Andrii
Thank you for your inquiry. There is no data available for these sensors being used at such high speeds.
Date published: 2020-07-13