We’re moving! This site will be unavailable between Friday, February 14 through Monday, February 17 as we migrate to dwyeromega.com. Please check back to see what’s changed.
The FSW530 Series flow switches are capable of detecting extremely low liquid flow rates from 13 mL/minute up to 10 L/minute with a full scale switch accuracy of ±1.0% or better! A wide variety of fluids may be measured. Repeatable results are achieved using a patented pelton-type microturbine wheel. This proven design has been providing precision results since 1988 and has developed a well deserved reputation for continuous operational service for many years without failure. Because of the compact size and economical cost of these products, the FSW530 models are suitable for a wide variety of industrial, commercial, laboratory and OEM applications. Some sample applications include high/low alarms for hydrocarbon fluids, fuels, light oils, solvents, coolant, pesticides, mild acids, alkalis, and de-ionized water. Either plastic or metal construction may be selected.
SPECIFICATIONS Accuracy: ±1% full scale Repeatability: ±0.5% full scale Recommended Liquids: Low viscosity (<10 cS), translucent or transparent chemically compatible with a minimal amount of entrained air Fittings: Acetal, stainless steel (optional) O-rings: FKM, EPDM (optional) Power: 12 to 24 Vdc @ 75 mA Maximum Pressure: Acetal: 6.9 bar (100 psig) Stainless Steel: 34.5 bar (500 psig) Enclosure: NEMA 1 (IP10) Recommended Filtration: 25 microns or less Relay: FET switch 24 Vdc, 250 mA Response Time: <1 second at 97% of final value Switching Hysteresis: ±2.0% full scale Dimensions: 60 x 55 x 90 mm (2.4 x 2.2 x 3.5") Temperature: Operation: 5 to 55°C (41 to 131°F) Storage: 0 to 70°C (32 to 158°F) Temperature Sensitivity: ±0.2% full scale or less per °C Wetted Materials: Ryton or 316 SS, epoxy, glass, sapphire and FKM or EPDM (optional)