Call us at 1-888-826-6342
Call us at 1-888-826-6342
Battery or DC Powered Magmeter with Pulse & Optional 4-20mA Output
4" Flanged Magnetic Flow Meter w/Integrated Display, Pulse Output, Battery Power
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Easy Setup
- Minimal Straight Pipe
- Mounted or Remote Rate and Total
- Tamper-Evident Seal
- IP68 Rated
- Touch Screen Programming
- 200:1 Turndown
FMG470-04-BXN Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Flow Range
Wetted Materials
Output Signal
Supply Power
Process Connection Size
Features
Velocity Range
Accuracy
Max Operating Pressure
Max Process Temperature
Media Type
Process Connection Type
The FMG470 Series is the most economical flanged electromagnetic flowmeter on the market. With electrodes designed to discourage fouling, it is available in 3” to 12” pipe in municipal or industrial water, waste and reclaimed water, pump stations, and packaged plant applications. Minimal straight pipe requirements allow iMAG-Series meters to be used in piping configurations where there is little space between the meter and an elbow.
FMG470 Series meters are CE certified, certified to NSF/ANSI standard 61 and are rated IP68 for applications where the meter may be operated under water to a depth of at least 10 feet (3 meters) continuously.
The display is meter mounted, and both rate and total indication are standard. Rate and total units and pulse scaling can be set via the front panel touch key pad by the user. Bidirectional flow reading is standard with totals available in forward, reverse, net flow, batch forward flow, and batch reverse flow. Batch totals can be reset.
FMG470 Series meters are CE certified, certified to NSF/ANSI standard 61 and are rated IP68 for applications where the meter may be operated under water to a depth of at least 10 feet (3 meters) continuously.
The display is meter mounted, and both rate and total indication are standard. Rate and total units and pulse scaling can be set via the front panel touch key pad by the user. Bidirectional flow reading is standard with totals available in forward, reverse, net flow, batch forward flow, and batch reverse flow. Batch totals can be reset.
Flow Rate(3"-12")
| Pipe Size (inches in diameter) | 3" | 4" | 6" | 8" | 10" | 12" |
| Max Flow Rate (Gallons/Minute) | 723 | 1285 | 2891 | 5140 | 8031 | 11565 |
| Cut-off (min) Flow Rate (Gallons/Minute) | 3.62 | 6.43 | 14.46 | 25.70 | 40.15 | 57.82 |
| Max Flow Rate (Litres/Second) | 46 | 81 | 182 | 324 | 507 | 730 |
| Cut-off (min) Flow Rate (Litres/Second) | 0.23 | 0.41 | 0.91 | 1.62 | 2.54 | 3.65 |
| Max Flow Velocity (Meters/Second) | 10 | 10 | 10 | 10 | 10 | 10 |
Where can I find a link to the manual? I would like a digitized copy to see if the display and abilities meet my requirements. What is a grounding ring for and why does the unit need to be grounded to the fluid other than through its housing?
The manual is provided on the same Product Web Page under the Manual Tab. Since it is a magnetic flow meter, the ground ring is used to re-direct all noise from external pumps, electrical, or the environment so it will not interfere with the flow measruement.
Date published: 2020-03-06
6M (20ft) DC Power/Output Cable, 4 Pin Connector For Pulse Output Models
C$143.88
0 In Stock
15M (50ft) DC Power/Output Cable, 4 Pin Connector For Pulse Output Models
C$229.68
0 In Stock
6M (20ft) DC Power/Output Cable, 8 Pin Connector For Pulse & 4-20mA Output Models
C$179.52
2 In Stock
15M (50ft) DC Power/Output Cable, 8 Pin Connector For Pulse & 4-20 mA Output Models
C$277.20
0 In Stock