Easy-view Flow Meters For Water and Oil
Easy-view Flowmeters
This item is available for quick shipping
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-4 | C$93.00 |
| 5-9 | C$88.35 |
| 10-24 | C$86.49 |
| 25-49 | C$82.77 |
| 50-99 | C$80.91 |
| 100+ | C$79.05 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- ±5% Full Scale Accuracy
- Direct Reading for Oil and Water
- NPT or Solder Fittings
- Polysulfone Construction
- Compact Size with Vertical Connections
- Large Easy-to-Read Scale
- Unique Spring Piston Mechanism
Edit Options
View all modelsNot all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Category
Media Type
Liquid Flow Range
Accuracy
Process Connection Type
Process Connection Size
Wetted Materials
Max Operating Pressure
Max Process Temperature
Scale
Valve Included
Product Specs
The OMEGA™ FL-9000 EZ-View flowmeters provide accurate, in-line indication of oil or water flow rates at an economical cost. These meters utilize a spring and piston mechanism within a polysulfone metering tube. The EZ-View meters are designed to mount in any position with no straight pipe runs required.
SPECIFICATIONS
Accuracy: ±5% FS
Repeatability: ±1% full scale
Material: Polysulfone, T300 series stainless steel spring, Buna flow indicator ring, Buna O-rings (on units with brass end fittings)
Dimensions: 38.1 mm (1½") across flats
FL-9200: 196.8 mm (7¾") L
FL-9000 and 9100: 133 mm (5¼") L
Connection:
FL-9200: Fits ¾" nominal (7/8" OD) or 1" nominal (1-1/8" OD) Type M Copper Tubing;
FL-9000- and FL-9100: 1 NPT, Male
Max. Temperature: 121°C (250°F)
Max. Pressure: 22.4 bar (325 psig)
| Model No.–NPT Fitting | Ranges (GPM) | Model No.– Solder Fitting | Ranges-Water (GPM) | |
| Water | Oil* | |||
| FL-9004 | FL-9104 | 0.5-4 | FL-9204 | 0.5-4 |
| FL-9007 | FL-9107 | 1.0-7 | FL-9207 | 1.0-7 |
| FL-9010 | FL-9110 | 1.0-10 | FL-9210 | 1.0-10 |
| FL-9016 | FL-9116 | 1.0-16 | FL-9216 | 1.0-16 |
| FL-9018 | FL-9118 | 3.0-18 | FL-9218 | 3.0-18 |
| FL-9028 | FL-9128 | 4.0-28 | FL-9228 | 4.0-28 |
Rated 5 out of
5
by
Maria60 from
Great equipment and great price
I do not work directly with this material but the Maintenance Team was happy with this.
Date published: 2016-03-30
Rated 5 out of
5
by
Dave R from
Excellent company to work with
The product works great. I must say the customer service I encountered was second to none. I would not hesitate to purchase from Omega Eng.
Date published: 2021-06-17
Rated 5 out of
5
by
kroj from
Very good product
I purchased this product primarily because of the temperature rating and the cost. Most of the flow meters I looked at in this price category did not meet the required temp or pressure rating. This one did.
Date published: 2016-08-15
Hello, The flow in my system is between 0 and 25 gpm. If I put on model FL-9028 (4 to 28 gpm) and the flow is lower than 4 gpm is the flowmeter completly close and no water is running or water is still flowing? Thank!
Thank you for your inquiry. The minimum flow rate is 4 GPM and the plunger will allow water to pass thru if under that flow rate.
Date published: 2020-12-09
