Call us at 1-888-826-6342
Digital Gauge
Force or Torque Indicators with Remote Sensors
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-9 | C$1,265.60 |
| 10-24 | C$1,202.32 |
| 25-49 | C$1,177.01 |
| 50-99 | C$1,126.38 |
| 100+ | C$1,101.07 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Interchangeable Force and Torque Sensors
- High Speed 2000 Hz Sampling rate
- Ultra-Compact Size
- 4 Selectable Units of Measure
DFG-RS3 Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Range
Force Type
Accuracy Class
Accuracy
Number of Digits
Features
Digital Gauge
Rated 2 out of
5
by
KVoorhies from
Unclear on Website
I was told that the meter and load cell were a kit, even after talking with your engineering. Other loads cells are $500 less! We were in a pinch, so we order both items separately. But $1500 for a load cell and meter seems excessive. Called customer support - was no help understanding, just kept stating "sold separately". It seems very odd that the meter and load cell are exactly the same price.
Date published: 2020-04-27
Rated 1 out of
5
by
youngblood from
In-accurate Information
Contacted Omega prior to purchasing the indicator and asked if you could disconnect a load cell after applying pressure then reconnect to the same load cell with the same loads applied, would it still read current load? Initially told yes, made the purchase to find out that was untrue. Contacted Omega again and then they told me the load cell would start back at zero. So now instead of being able to connect and reconnect from one load cell to another you need to purchase one indicator per load cell to constantly monitor the loads in different areas. My application covers a large area and having fragile wires hanging everywhere is not feasible. The specific PN's I'm referencing are: DFG-RS3, DFG-RSA and LCWD-1K. Due to poor information provided prior to purchasing and the horrible customer service experience OMEGA gets a low rating.
Date published: 2022-05-05
Rated 5 out of
5
by
John SH from
very versatile
the fact that calibration data is stored in the sensor is very helpful. no recalibration needed when you switch sensors.
Date published: 2023-12-20
Rated 4 out of
5
by
Tony56546252 from
Just what we needed to get the job done.
It was hard to find a sensor and loadcell combo that was transportable and met our needs. This worked great
Date published: 2023-03-30
Rated 4 out of
5
by
Tony56546252 from
Just what we needed
Easy to use and came preprogrammed which was very helpful.
Date published: 2023-03-30
RoHS 2015/863 - View Certificate
CE Approved
UKCA
Are size dimensions available for the sensors that are used in conjunction with the DFG-RS3 force/torque indicator. We have a handle that we wish to measure both the pull force to allow actuation and rotational torque for valve opening.
Yes,
Dimensional drawing for all RLC and RTQ load cells and torque sensors for the DFG-RS3 and DFG-RS5 are contained in the RLC and RTQ users manual which is available for download from the MANUALS file on our website.
Date published: 2020-01-03
Can this be used to measure the force (in netwons) of pulling a load of freight on a warehouse floor using a pallet jack?
The DFG-RSA is a remote sensor adaptor. The main unit is the DFG-RS3. The main unit can certainly be used to measure pulling force, the setup just needs to be appropriate for the application. For any further questions about your specific application please feel free to email us at pressure@omega.com.
Date published: 2020-10-02
Does this come with a calibration certificate?
Thank you for your question?
Unfortunately we will need a little more information from you on the product you are inquiring about.
Date published: 2019-06-26
Does DFG-RS3 come with the Torque Sensors for 10 oz-in to 100 lb-in Ranges? If yes, could you kindly provide a picture of the sensor (did not find in the manual).
Thank you for your inquiry.
The website now has the linc to all the sensors for this unit.
hope this was helpful?
Date published: 2020-10-02
We have lost the CD that came with this device. How can we get another copy? Is there an available download link?
Please contact us via email to pressure@dwyeromega.com. We should be able to send you a link to the software. Please advise if you want the configuration software for the DFG-RSA remote connector or the software for the DFG-RS3/RS5 display.
Date published: 2024-02-23