Call us at 1-888-826-6342.
Stainless Steel, Beam Load Cell with Overload Stops
100 lbf, ±0.03%, Linearity, 3 mV/V Output, Cable
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-9 | C$775.30 |
| 10-24 | C$736.54 |
| 25-49 | C$721.03 |
| 50-99 | C$690.02 |
| 100+ | C$674.51 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- 5-Point NIST Traceable Calibration with
- 59 kOhm Shunt Cal Data Provided
- All Stainless Steel Construction for Harsh Industrial Applications
- 0.25% Interchangeable for Multiple Cell Applications
LC501-100 Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Weight Capacity
Height
Width
Length
Connection Type
Cable Length
Measurement Units
Force direction
Linearity
Electrical Output (nominal)
The LC501 is also available in metric configurations, with ranges from 0-25 to 0-10,000 kgf. Please see the LCM501 for complete details, or contact our Pressure department for more information.
SPECIFICATIONS
Excitation: 10 Vdc, 15 Vdc max
Output: 3 mV/V ±0.25%
5-Point Calibrated (in Compression): 0%, 50%, 100%, 50%, 0% (includes 59 k? shunt cal data)
Linearity: ±0.03% FSO
Hysteresis: ±0.02% FSO
Repeatability: ±0.02% FSO
Zero Balance: ±1% FSO
Operating Temp Range: -34 to 82°C (-30 to 180°F)
Compensated Temp Range: 16 to 71°C (60 to 160°F)
Thermal Effects:
Zero: ±0.001% FSO/°F (0.0018%/°C)
Span: ±0.001% FSO/°F (0.0018%/°C)
Safe Overload: 150% of capacity
Ultimate Overload: 300% of capacity
Input Resistance: 360 ? minimum
Output Resistance: 350 ±10 ?
FS Deflection: 0.5 mm (0.02") typical
Construction: 17-4 PH stainless steel, Ranges thru 30,000 lbf.
Electrical:
LC501/LCM501: 4.6 m (15') 4 conductor shielded cable
LC511/LCM511: 6-pin DT02H-10-6P or equivalent
Mating connector: PT06F10-6S, sold separately
SPECIFICATIONS
Excitation: 10 Vdc, 15 Vdc max
Output: 3 mV/V ±0.25%
5-Point Calibrated (in Compression): 0%, 50%, 100%, 50%, 0% (includes 59 k? shunt cal data)
Linearity: ±0.03% FSO
Hysteresis: ±0.02% FSO
Repeatability: ±0.02% FSO
Zero Balance: ±1% FSO
Operating Temp Range: -34 to 82°C (-30 to 180°F)
Compensated Temp Range: 16 to 71°C (60 to 160°F)
Thermal Effects:
Zero: ±0.001% FSO/°F (0.0018%/°C)
Span: ±0.001% FSO/°F (0.0018%/°C)
Safe Overload: 150% of capacity
Ultimate Overload: 300% of capacity
Input Resistance: 360 ? minimum
Output Resistance: 350 ±10 ?
FS Deflection: 0.5 mm (0.02") typical
Construction: 17-4 PH stainless steel, Ranges thru 30,000 lbf.
Electrical:
LC501/LCM501: 4.6 m (15') 4 conductor shielded cable
LC511/LCM511: 6-pin DT02H-10-6P or equivalent
Mating connector: PT06F10-6S, sold separately
Can the load cell be used to measure the force in the reverse direction (i.e. tension) as well? We have to mount the cell upside down, does it work in that configuration?
Thank you for your question?
The beam low cell comes calibrated in One Direction However it can measure in tension or compression.
Hope this was helpful.
Date published: 2020-07-10
What is the Waterproof rating of this device?
The environmental rating for the LC501 is IP40. It is not waterproof
Date published: 2021-07-23
Accessories
15 foot 4 wire cable assembly for PX103U1 series with 0-5 Vdc output
C$189.07
0 In Stock
Base Plate for 20,000 lb range
C$550.80
0 In Stock
Accessories & Compatible Meters
Accessories and Compatible Meters