Call us at 1-888-826-6342.
High Accuracy, 0.75" to 1" Diameter, Miniature Inline Load Cells
500 lbf, ±0.2%, Linearity, 2 mV/V Output, Cable
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-9 | C$1,632.13 |
| 10-24 | C$1,550.52 |
| 25-49 | C$1,517.88 |
| 50-99 | C$1,452.60 |
| 100+ | C$1,419.95 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- High Accuracy
- 5 Point Calibration NIST Traceable Calibration Included
- Small Footprint
- All Stainless Steel Construction
LCFD-500 Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Weight Capacity
Measurement Units
Force direction
Linearity
Electrical Output (nominal)
OD
Height
Cable Length
Connection Type
Small in size and capable of providing highly accurate readings, the LCFD Series miniature load cells are precision subminiature load cells for industrial applications requiring a small size and high accuracy. They are all stainless steel, measure both tension and compression loads and have male thread studs for load attachment. The exclusive internal design provides superior long term stability and minimizes the effects of small off-axis loads. Compatible Meters: DP41-S and DP25B-S
The LCFD is also available in metric configurations, with ranges from 0-10 to 0-5,000 N and metric threads. Please see the LCMFD for complete details, or contact our Pressure department for more information..
SPECIFICATIONS
Excitation:
?10 lb/50 N: 5 Vdc
?25 lb/100 N: 10 Vdc
Output:
2.2 lb/10 N: 1.5 mV/V (nom)
?5 lb/20 N: 2 mV/V (nom)
Accuracy (Linearity and Hysteresis Combined):
?100 lb/500 N: ±0.15% FSO
?250 lb/1000 N: ±0.20% FSO
Repeatability:
?2.2 lb: ± 0.15% FSO
?5 lb/10 N: 0.20% FSO
5-Point Calibration (in Tension): 0%, 50%, 100%, 50%, 0%
Zero Balance: ±2% FSO
Operating Temp Range: -54 to 121°C (-65 to 250°F)
Compensated Temp Range: 16 to 71°C (60 to 160°F)
Thermal Effects:
Span: ±0.009% FSO/°C
Zero: ±0.009% FSO/°C
Safe Overload: 150% of capacity
Ultimate Overload: 300% of capacity
Bridge Resistance: 350 ? minimum
Construction: Stainless steel
Electrical Connection: 1.5 m (5') 4-conductor, shielded cable
?10 lb/50 N: SS overbraided PTFE with temperature compensation board
Protection Class: IP65
The LCFD is also available in metric configurations, with ranges from 0-10 to 0-5,000 N and metric threads. Please see the LCMFD for complete details, or contact our Pressure department for more information..
SPECIFICATIONS
Excitation:
?10 lb/50 N: 5 Vdc
?25 lb/100 N: 10 Vdc
Output:
2.2 lb/10 N: 1.5 mV/V (nom)
?5 lb/20 N: 2 mV/V (nom)
Accuracy (Linearity and Hysteresis Combined):
?100 lb/500 N: ±0.15% FSO
?250 lb/1000 N: ±0.20% FSO
Repeatability:
?2.2 lb: ± 0.15% FSO
?5 lb/10 N: 0.20% FSO
5-Point Calibration (in Tension): 0%, 50%, 100%, 50%, 0%
Zero Balance: ±2% FSO
Operating Temp Range: -54 to 121°C (-65 to 250°F)
Compensated Temp Range: 16 to 71°C (60 to 160°F)
Thermal Effects:
Span: ±0.009% FSO/°C
Zero: ±0.009% FSO/°C
Safe Overload: 150% of capacity
Ultimate Overload: 300% of capacity
Bridge Resistance: 350 ? minimum
Construction: Stainless steel
Electrical Connection: 1.5 m (5') 4-conductor, shielded cable
?10 lb/50 N: SS overbraided PTFE with temperature compensation board
Protection Class: IP65
Rated 3 out of
5
by
AgEngr from
Load cell has the right features.
Although the load cell is just right for our application, the company inventory management system is flawed. I waited a whole month for the product to enter inventory. Meanwhile, we were without data in a major part of our research project.
Date published: 2016-08-29
Rated 5 out of
5
by
cpy89 from
Subminiature loadcell
The load cell works really well with high repeatability.
Date published: 2018-03-26
Does it work well with PLC without noises?? Do we need a specific omega amplifier for this or any amplifier will do ?
Thank you for this inquiry, this unit has a 2mv/V output. Most PLC systems require a amplified output of 0-5 volts or 4-20mA. You can search for Signal Conditioners on our site and choose the one that works best for your application.
Date published: 2021-10-08
Accessories
Accessories & Compatible Meters
Accessories and Compatible Meters
Ranges available to 500,000 lb by quotation Accessories
