Call us at 1-888-826-6342.
Edit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
The Omega IF-001 Smart Interface cable provides an easy way to configure and monitor Omega Smart Probes. The USB 2.0 compliant device appears as a serial port and is compatible with Windows, iOS, and Linux.
The IF-001 provides a Modbus RTU or Modbus ASCII interface to the entire smart sensor register set.
An integrated command line interface allows for quick smart sensor register configuration and monitoring using standard terminal emulators. The 8-pin M12 connector provides 3.3 Vdc power for external Smart Sensor probe with an integrated power monitor to protect against short circuits.
|IF-001||Smart Probe USB Interface|
|SP-001-0||Smart Probe IR, 6:1 field of view|
|SP-001-1||Smart Probe IR, 6:1 field of view, with discrete I/O|
|SP-002-0||Smart Probe IR, 10:1 field of view|
|SP-002-1||Smart Probe IR, 10:1 field of view with discrete I/O|
|SP-003-1||THB Smart Probe with I/O Tube Housing|
|SP-004-1||TH Smart Probe with I/O Tube Housing|
|SP-004-4||TH Smart Probe with I/O Bulkhead Housing|
|SP-005-1||Temperature and RTD Smart Probe with discrete I/O|
|SP-010-1||Load Cell Smart Probe with discrete I/O|
|SP-013-1||Digital Interface Smart Probe with discrete I/O|
|SP-014-1||Process Monitoring Smart Probe with discrete I/O|
|SP-016-1||Heat Flux Smart Probe with discrete I/O|