Call us at 1-888-826-6342
Call us at 1-888-826-6342.
Stainless Steel Cartridge Heater 0.13-1.25" OD 1-36" Long
1/8 in x 1 in, 12 in Lead, 15W, 120V
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-4 | C$75.72 |
| 5-9 | C$71.93 |
| 10-24 | C$70.42 |
| 25-49 | C$67.39 |
| 50-99 | C$65.88 |
| 100+ | C$64.36 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- 304 Stainless steel sheath for excellent thermal conductivity
- Sheath temperatures up to 677°C (1250°F)
- Diameters between 1/8 in to 1 1/4 in
- Lengths from 1 in to 36 in (2.5 to 91 cm)
- Fiberglass insulated lead wire
- 12 in lead length standard
- 120 V and 240 V options available
- Great for applications such as dies, molds, hot melts and more
- 16 termination options available, see spec sheet
SCH-0125-0100-0015-N-12-1 Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Heater Diameter
Supply Voltage
Cartridge Length
Lead Length
Power
Omega’s SCH-Series cartridge heaters are designed to provide maximum wattage in limited spaces. This heater series is offered with high and low density options. The sheath is made of 304 stainless steel which provides uniform heat distribution and good thermal conductivity for fast heating. A variety of cold-end terminations, mounting and threading options are available for maximum versatility. Applications for this cartridge heater include packaging, rubber molding, form fill and sealing, platen heating, HVAC compressors, die casting, hot melt adhesives, food manufacturing and extrusion.
The webpage for this product instructs me to drill and ream the hole for these heaters +.001"/-0 tolerance. Do you suggest applying a thin layer of thermally conductive gel between the sheath and the ID of the hole?
There would be no harm in adding some thermally conductive gel but if a tight fit is achieved the Heater will perform as expected.
Date published: 2021-12-17