Call us at 1-888-826-6342
Polyimide Flexible Heater with Polyimide Strain Relief
1 in Width, 12 in Length, Self-Adhesive, 2.5 W/in2
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-4 | C$110.18 |
| 5-9 | C$104.67 |
| 10-24 | C$102.47 |
| 25-49 | C$98.06 |
| 50-99 | C$95.86 |
| 100+ | C$93.65 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- All polyimide strain relief and insulation
- Optional pressure sensitive adhesive models
- Temperature ranges from -57°C (-71°F) to 232°C (450°F)
- Non-magnetic heating element
PLM-112/2-P Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Shape
Temperature range
Power Density
Power (watts)
Supply Voltage
Diameter
Width
Length
Pressure senstivie Adhesive (PSA)
Thickness
Heater Material
The PLM-Series polyimide flexible heaters are offered in a variety of sizes and watt densities. These flexible heaters are polyimide insulated with a polyimide strain relief designed to be used in various environments and hard to reach places. They feature a non-magnetic heating element and watt densities of 2.5 W/in2, 5 W/in2 or 10 W/in2.
PLM-Series heaters have a thickness of 0.01 for a low profile wherever they are installed. Self-adhesive options available for easy and simple installation and eliminate the need for clamping. Temperature ranges from -40°C (-40°F) to 149°C (300°F) for self-adhesive models and -57°C (-71°F) to 232°C (450°F) for no adhesive models.
The PLM-Series heaters are made of polyimide for increased flexibility for curved surfaces and chemical resistivity. The thin nature of these heaters makes them ideal for tight spaces and good for applications such as hot plates, airplanes, storage tanks, beakers, trays, drying chambers and more.
RoHS 2015/863 - View Certificate
CE Approved
UKCA
For the Low Voltage polyimide heaters, can the supply voltage exceed the Omega stated 28V? For example, supply at 35V instead?
The supply Voltage range is +/- 10% of 28 VDC and exceeding this may cause damage to the Heater.
Date published: 2024-01-30
What Pressure-sensitive adhesive is used on these?
Thank you for your inquiry. This product use 468 MP adhesive.
Date published: 2023-05-03
What is the tolerance on heater resistance? Thanks
The Resistance tolerance for the PLMLV series Heaters is nominally +/- 10%.
Date published: 2022-07-12
Is the nominal power density given with the supply voltage as AC or DC?
Thank you for your inquiry. Power Density is based on DC Voltage.
Date published: 2024-01-30
Is this heater compatible with PID Temperature Controller Model: SYL-2362 from Auber instruments?
Thank you for your inquiry. Yes these are compatible with that controller.
Date published: 2024-01-30
Can I run this on 28VDC instead of 28VAC? I assume that it rectifies the VAC signal to VDC anyway.
Thank you for your inquiry. You may use DC Voltage.
Date published: 2024-01-30
Is the plm series able to handle outgassing?
Omega does not specify the outgassing on these Heaters though Polyimide has very low levels. The PLM series is generally used in atmosphere applications.
Date published: 2024-01-30