Call us at 1-888-826-6342
Call us at 1-888-826-6342.
Fiberglass Heater Rope 900°F Max and 120-240 Volts
OMEGALUX™ Rope Heaters
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-9 | C$198.74 |
| 10-24 | C$188.80 |
| 25-49 | C$184.83 |
| 50-99 | C$176.88 |
| 100-199 | C$172.90 |
| 200+ | C$168.93 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Operating Temperature Rating to 482°C (900°F)
- Wraps Around Small Diameter Pipes and Tubes
FGR-100-240V Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Power (Watt)
Heater Length
Supply Voltage
Maximum Operating Temperature
Power Density
Width/Diameter
Lead wire Length
Lead wire Exit Direction
Built in Thermostat
Termination
Heater Insulation Material
OMEGALUX™ rope heaters apply heat to tubing with diameters as small as 1/8' (3.2 mm). Featuring a maximum allowable operating temperature of 482°C (900°F), the FGR series rope heaters can be wrapped around either conductive or non-conductive surfaces. Each end terminates with 24' (610 mm) long fiberglass insulated lead wire. These rope heaters are very similar to our heater tapes. Please review our tape heaters for your application needs.
SPECIFICATIONS
Maximum Allowable Temperature: 482°C (900°F)
Suitable for Use on Conductive Surface: Yes
Resists Moisture, Vapor, Or Chemicals: No
Standard Diameter: 5 mm (3/16 inch)
Voltage: 120 Volt ac or dc, 240V optional
Linear Wattage: 4 Watts/in. approx.
Heater Length: 3, 6, 8, or 10 feet (0.9, 1.8, 2.4 or 3.0 m)
Lead Length: 24 inches (609 mm)
Termination: Stripped leads
SPECIFICATIONS
Maximum Allowable Temperature: 482°C (900°F)
Suitable for Use on Conductive Surface: Yes
Resists Moisture, Vapor, Or Chemicals: No
Standard Diameter: 5 mm (3/16 inch)
Voltage: 120 Volt ac or dc, 240V optional
Linear Wattage: 4 Watts/in. approx.
Heater Length: 3, 6, 8, or 10 feet (0.9, 1.8, 2.4 or 3.0 m)
Lead Length: 24 inches (609 mm)
Termination: Stripped leads
Rated 4 out of
5
by
Bern from
Good product
These heater ropes are ideal for small bore tube, they heat quickly and are very flexible which is good for complicated tubing layouts. Just be careful not to pull it too tight.
Date published: 2016-08-28
Rated 5 out of
5
by
Nomad from
Worked as expected
This was my second purchase of this item. The first lasted about a year before it failed. It works as expected. Happy with this product.
Date published: 2018-10-16
Rated 4 out of
5
by
Siavash from
Good
It works as I expect. It will be awesome if we can get this heater with costume length.
Date published: 2018-05-17
Rated 4 out of
5
by
righton from
Heated up really faster than I expected
If it were not for the leads being at opposite ends the heater worked very good.
Date published: 2017-02-21
Rated 5 out of
5
by
juarezrd from
Great product
I've been using these rope heaters multiple times and quality, as well as power provided, are as expected.
Date published: 2017-01-31
RoHS 2015/863 - View Certificate
CE Approved
UL Recognized Component
What is the expected lifetime of the OMEGALUX™ Rope Heaters FGR-030?
Thank you for your inquiry with Omega.
It is an application dependent product. There is not an expected lifetime specification for our rope heaters.
Date published: 2019-06-25
Hello, do I just plug this into a wall? Do I need to buy something else as well to make this heater work?
Thank you for your inquiry. This requires a temperature controller or thermostat. Please contact OMEGA directly at heaters@omega.com for suggestions.
Date published: 2021-10-07
