Heavy Duty Industrial NEMA-9 Pressure Switch for High Temps20 to 500 psi, fixed deadband
Please add to cart to keep it or exit the configuration
- UL Listed
- Division 1 Rating
- Dual Set Points, Tamper Resistant
- Heavy Duty Enclosure
- Rated NEMA-4X, -7, -9, IP66
- Terminal Block Wiring
- High Temperature Operation to 200°C (392°F) Process Temperature
Edit OptionsView all models
Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
The PSW-700 Series pressure switch is built for the rugged industrial setting. The internal set points allow adjustments while keeping the electrical component isolated from the environment. The internal and external set points have a range scale allowing fast and easy set-up.
Approvals: UL listed; Class I, Division 1 & 2 Groups B, C, and D; Class II, Groups E, F, and G; Class III
Repeatability: ±1% range
Process Temperature: Stainless Steel: -57 to 204°C (-70 to 400°F) Brass: -40 to 149°C (-40 to 300°F) Buna-N: -23 to 93°C (-10 to 200°F)
Ambient Temperature: -50 to 71°C (-58 to 160°F), except for models 703 to 705 which are -18 to 71°C (0 to 160°F). Setpoint typically shifts less than 1% of range for a 28°C (50°F) ambient temperature change.
Shock:Setpoint repeats after 15 g, 10 ms duration
Vibration: Setpoint repeats after 2.5 g at 5 to 500 Hz
Output: (1) SPDT or (2) SPDT 15 A 125/250/480 Vac
Enclosure: Low copper cast epoxy- coated aluminum
Electrical Connection: 3/4 NPT conduit; internal screw terminals
psi ranges: 230 (max) H x 125 W x 108 mm D (9 x 4.9 x 4.3')
H2O ranges: W and D = 153 mm (6')
Weight: approx. 1.7 kg (4 lb)