2 Channel Handheld Humidity K Type Thermocouple DataloggerHumidity Temperature Meter
Please add to cart to keep it or exit the configuration
Edit OptionsView all models
Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
The HH311 is a low cost, high performance handheld meter. It offers a triple display to show the temperature and humidity from a handheld probe and can display data from a separate K type thermocouple connected via a standard SMP type miniature connector to the T2 input. The temperature/humidity probe uses a semiconductor and polymer capacitive sensor. An optional software package is offered to allow data to be read by a PC through the RS232 port.
Range: 0 to 100% RH, -20 to 60°C (-4 to 140°F)
T2 Range: -200 to 1370°C (-328 to 2498°F)
Resolution: 0.1 (except T2 for -200 > T2 > 200)
Accuracy: ±2.5% RH at 25°C, ±0.7°C (±1.4°F)
T2 Accuracy: ±[0.5% rdg ±1°C (2°F)]
Humidity Response Time: 75 sec in slowly moving air
T1 Response Time: 40 sec in slowly moving air
Meter Dimensions: 186 H x 64 W x 30 mm D (7.3 x 2.5 x 1.2')
Probe Dimensions: 190 x 15 mm (7.5 x 0.6'), cable stretches to 1.5 m (5')
Operating Environment: 0 to 50°C (32 to 122°F), 0 to 90% non-condensing
Storage Environment: -10 to 60°C (14 to 140°F), 0 to 80% non-condensing
Power Requirements: One 9V battery (included), AC adapter 9 Vdc 10 mA min
Plug Diameter: 3.5 x 1.35 mm
RS232: 9600 bps, N, 8, 1 serial interface
Battery Life: Approx 100 hours with alkaline battery
Weight: Approx 320 g (11.3 oz)