Call us at 1-888-826-6342.
Ceramic Miniature Thermocouple Connectors for High Temperature
Ultra High Temperature Miniature Connectors, Including Series for High Vacuum Applications
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-9 | C$17.34 |
| 10-49 | C$15.09 |
| 50-99 | C$14.39 |
| 100-999 | C$13.53 |
| 1000-4999 | C$12.83 |
| 5000+ | C$11.96 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Extra Heavy Duty Ceramic Construction
- One-Piece Body with Removeable Cap Design
- Oversized Terminal Screws for Easy Wiring
- Accepts Stranded or Solid Wire up to Size 20 AWG
USHX-K-F-NL Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Sensing Type
Thermocouple Calibration Type
Temperature Max
Temperature Range
Connector Gender
Calibration Standard
Additional Features
Connector Style
Temperature Unit
Temperature Min
No. of Pins/Sockets
SHX subminiature connectors are ideal for use with fine gage thermocouple wires in applications where high temperatures are required. The SHX connector is permanently dot-coded to conform to ANSI and OMEGA standards for applications such as high vacuum furnaces where contamination would adversely affect the process, USHX connectors are shipped with a removable color-coding dot. Two-piece ceramic construction assures long life, while the oversized terminal screws allow for easy wiring.
Rated 4 out of
5
by
150pilot from
Works as advertised
Connectors work as advertised although being ceramic they crack easily with rough handling.
Note: Strain relief clamps are also needed to facilitate holding the attached cable in place.
Date published: 2016-09-23
Rated 3 out of
5
by
Herr Hans from
Hight temp connector
I like the firm hold on the connectors but did not realize how fragile the cover assembly is. I broke the cover with only moderate tightening of the screws.
I was a little more cautious on the next assembly and it was ok.
Date published: 2018-05-26
Rated 5 out of
5
by
Kev D from
High temp Type K (male)
Used in a 600C muffle furnace application. Does it's job well after a couple weeks so far. Will update if anything happens in the future, 8/10/23
Date published: 2023-08-10
Rated 5 out of
5
by
DONM from
OMEGA is the ORIGINAL
OMEGA is the ORIGINAL source for engineering needs...been over 20 years for me.
Date published: 2023-01-22
Rated 5 out of
5
by
gsjackso from
Reliable performance at high temperatures
These connectors perform well under environments well above temperatures where plastic connectors fail. Their reliability is critical in our high temperature heat exchanger testing.
Date published: 2023-01-21
Rated 5 out of
5
by
Calvin DeKoter from
Omega Ceramic Thermocouple Connectors
Great connectors, easy to use and perfect for hi-temp scenarios where passthroughs are frustrating.
Date published: 2022-11-30
Rated 5 out of
5
by
JOSE LUIS ARREITA from
Miniature Connectors
It was received on time and according to the illustration
Date published: 2021-11-14
Rated 3 out of
5
by
RyanJC from
High temp performance at a cost.
These thermocouple connectors are some of the highest temperature connectors you will find on the market. However, they are very fragile due to their ceramic nature and we found they will break not only when dropped but also if you're not careful tightening the screws. The lids are kept on through captive nuts, but many of the nuts were loose during shipping and some came missing. They will get the job done, but I highly recommend ordering extras.
Date published: 2021-05-03
What is the screw size used on ceramic mini thermocouple connectors, to install cover?
Hi Geo1
Cover screw is 3-48 x 5/16" long Binding Head.
Best regards
OMEGA
Date published: 2021-11-30
What is the percentage of alumina the SHX-K-F body contains?
Thank you for your question.
The SHX series bodies all contain a minimum of 95% alumina.
Date published: 2020-04-23
Where can I buy strain relief clamps for the SHX male and female miniature connectors?
Hi, thanks for connecting with Omega. The part number for the cable clamp is PCLM-SHX. https://www.omega.com/en-us/sensors-and-sensing-equipment/temperature/thermocouple-and-rtd-connectors/hightemp-stnd-con-acc/p/PCLM-SHX
Please email us at temp@omega.com with any further questions, thanks
Date published: 2019-06-18