
Thermocouple Probes with PFA Insulated Lead Wire
Rugged Heavy Duty Transition Joint Thermocouple Probes
Volume discounts available
Volume Discount Schedule
Quantity | Price each |
---|---|
1-9 | C$52.00 |
10-24 | C$49.40 |
25-99 | C$46.80 |
100-499 | C$44.20 |
500-999 | C$41.60 |
1000+ | C$39.00 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Rugged Heavy Duty Transition Joint Thermocouple Probes is rated
out of
5 by
7.
- Transition and Wire Rated to 260°C (500°F)
- Available in 304, 310, 316 & 321 SS or Inconel Sheath
- Also Available in Super OMEGACLAD™ XL for Stable, Long-Term Operation at High Temperatures
- Diameters from 1/16 to 1/4 "
- 1 meter (40") of PFA Coated Stranded 24 AWG Lead Wire is Standard
- Longer leads are available at $1 per foot over 40 inches
- Made from Special Limits of Error Material
Edit Options
View all modelsNot all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination or click the CONFIGURE button to build your own.
Category
Thermocouple Type
Process Temperature Range
Sensor Application
Sheath Material
Junction Type
Probe Diameter
Probe Length
Cable Insulation
Wire Gauge
Cable Length
Termination Connection Type
Color Code Standard
Additional Feature
Product Specs
The TJ36 Series of thermocouple probes offers Heavy Duty Transition Joint Probes in convenient termination to PFA coated lead wire. Refer chart to get Probe Diameter (A), Transition junction diameter (B) & Spring length (C) & Length of Transition junction and Strain relief (D)
Alloy/ANSI Color Code | Sheath Dia. (") | Model No. 12" Length | Model No. 18" Length | Model No. 24" Length |
J Iron-Constantan Inconel Sheath | 1/16" 1/8" 3/16" 1/4" | TJ36-ICIN-116(*)-12 TJ36-ICIN-18(*)-12 TJ36-ICIN-316(*)-12 TJ36-ICIN-14(*)-12 | TJ36-ICIN-116(*)-18 TJ36-ICIN-18(*)-18 TJ36-ICIN-316(*)-18 TJ36-ICIN-14(*)-18 | TJ36-ICIN-116(*)-24 TJ36-ICIN-18(*)-24 TJ36-ICIN-316(*)-24 TJ36-ICIN-14(*)-24 |
J Iron-Constantan 304 SS Sheath | 1/16" 1/8" 3/16" 1/4" | TJ36-ICSS-116(*)-12 TJ36-ICSS-18(*)-12 TJ36-ICSS-316(*)-12 TJ36-ICSS-14(*)-12 | TJ36-ICSS-116(*)-18 TJ36-ICSS-18(*)-18 TJ36-ICSS-316(*)-18 TJ36-ICSS-14(*)-18 | TJ36-ICSS-116(*)-24 TJ36-ICSS-18(*)-24 TJ36-ICSS-316(*)-24 TJ36-ICSS-14(*)-24 |
K CHROMEGA™-ALOMEGA™ Inconel Sheath | 1/16" 1/8" 3/16" 1/4" | TJ36-CAIN-116(*)-12 TJ36-CAIN-18(*)-12 TJ36-CAIN-316(*)-12 TJ36-CAIN-14(*)-12 | TJ36-CAIN-116(*)-18 TJ36-CAIN-18(*)-18 TJ36-CAIN-316(*)-18 TJ36-CAIN-14(*)-18 | TJ36-CAIN-116(*)-24 TJ36-CAIN-18(*)-24 TJ36-CAIN-316(*)-24 TJ36-CAIN-14(*)-24 |
K CHROMEGA™-ALOMEGA™ 304 SS Sheath | 1/16" 1/8" 3/16" 1/4" | TJ36-CASS-116(*)-12 TJ36-CASS-18(*)-12 TJ36-CASS-316(*)-12 TJ36-CASS-14(*)-12 | TJ36-CASS-116(*)-18 TJ36-CASS-18(*)-18 TJ36-CASS-316(*)-18 TJ36-CASS-14(*)-18 | TJ36-CASS-116(*)-24 TJ36-CASS-18(*)-24 TJ36-CASS-316(*)-24 TJ36-CASS-14(*)-24 |
E CHROMEGA™-Constantan Inconel Sheath | 1/16" 1/8" 3/16" 1/4" | TJ36-CXIN-116(*)-12 TJ36-CXIN-18(*)-12 TJ36-CXIN-316(*)-12 TJ36-CXIN-14(*)-12 | TJ36-CXIN-116(*)-18 TJ36-CXIN-18(*)-18 TJ36-CXIN-316(*)-18 TJ36-CXIN-14(*)-18 | TJ36-CXIN-116(*)-24 TJ36-CXIN-18(*)-24 TJ36-CXIN-316(*)-24 TJ36-CXIN-14(*)-24 |
E CHROMEGA™-Constantan 304 SS Sheath | 1/16" 1/8" 3/16" 1/4" | TJ36-CXSS-116(*)-12 TJ36-CXSS-18(*)-12 TJ36-CXSS-316(*)-12 TJ36-CXSS-14(*)-12 | TJ36-CXSS-116(*)-18 TJ36-CXSS-18(*)-18 TJ36-CXSS-316(*)-18 TJ36-CXSS-14(*)-18 | TJ36-CXSS-116(*)-24 TJ36-CXSS-18(*)-24 TJ36-CXSS-316(*)-24 TJ36-CXSS-14(*)-24 |
T Copper-Constantan Inconel Sheath | 1/16" 1/8" 3/16" 1/4" | TJ36-CPIN-116(*)-12 TJ36-CPIN-18(*)-12 TJ36-CPIN-316(*)-12 TJ36-CPIN-14(*)-12 | TJ36-CPIN-116(*)-18 TJ36-CPIN-18(*)-18 TJ36-CPIN-316(*)-18 TJ36-CPIN-14(*)-18 | TJ36-CPIN-116(*)-24 TJ36-CPIN-18(*)-24 TJ36-CPIN-316(*)-24 TJ36-CPIN-14(*)-24 |
T Copper-Constantan 304 SS Sheath | 1/16" 1/8" 3/16" 1/4" | TJ36-CPSS-116(*)-12 TJ36-CPSS-18(*)-12 TJ36-CPSS-316(*)-12 TJ36-CPSS-14(*)-12 | TJ36-CPSS-116(*)-18 TJ36-CPSS-18(*)-18 TJ36-CPSS-316(*)-18 TJ36-CPSS-14(*)-18 | TJ36-CPSS-116(*)-24 TJ36-CPSS-18(*)-24 TJ36-CPSS-316(*)-24 TJ36-CPSS-14(*)-24 |
N OMEGALLOY™ NICROSIL-NISIL ** Inconel Sheath | 1/16" 1/8" 3/16" 1/4" | TJ36-NNIN-116(*)-12 TJ36-NNIN-18(*)-12 TJ36-NNIN-316(*)-12 TJ36-NNIN-14(*)-12 | TJ36-NNIN-116(*)-18 TJ36-NNIN-18(*)-18 TJ36-NNIN-316(*)-18 TJ36-NNIN-14(*)-18 | TJ36-NNIN-116(*)-24 TJ36-NNIN-18(*)-24 TJ36-NNIN-316(*)-24 TJ36-NNIN-14(*)-24 |
**For Super OMEGACLAD™ XL, change “IN” to “XL” and add $3 to price. Note: Super OMEGACLAD™ XL sheaths are available in Type K and N calibrations only.
View the Thermocouple Accuracy and Color Code Table
Rated 5 out of
5
by
msm1 from
Does the job.
The company i work for uses these for process controls they last a long time and are very reliable.
Date published: 2016-04-14
Rated 5 out of
5
by
Anonymous from
Great probe for temperature chamber
Very easy to set up, the rigidity of the probe allows in to stay it place close to the sample under test but it malleable enough to be bendable by hand. Highly recommend it.
Date published: 2021-03-11
Rated 3 out of
5
by
Rich64 from
Functional yes but improvement possibility
Ordered a SS k-type first but had some oxidation on probe. Followed up with a CAXL k-type and still have oxidation on probe. Both were used in the same SS protection tube. Ambient is a O2 rich environment using gas heated from 500 to 1700F. Not sure if exotic T/Cs would be a better choice.
Date published: 2020-12-22
Rated 5 out of
5
by
Mwgtech from
Product worked exactly what I needed it for.
Product was exactly what I needed. Product was of the high quality i expected.
Date published: 2020-12-08
Rated 5 out of
5
by
Laurel M from
Awesome replacement for mercury thermometers.
This probe is amazing! The fact that you can customize the materials and size to your specific needs is wonderful! We will never use mercury thermometers for our distillations again!
Date published: 2020-08-08
Rated 4 out of
5
by
C M R from
Lab Technician
This thermocouple is light and accurate in temperature.
Date published: 2020-05-28
Rated 4 out of
5
by
C M R from
Technician
Thermocouple is very accurate and light so it could be hold by a small clamp. Just make sure that the gauge of the wire is the right size for your project.
Date published: 2020-05-26
What length needs to be inserted into the process for an accurate reading with a 6inch probe?
Hi Peter, considering the thermocouple sensor is at the tip of the probe, it would be safe to assume 0.5-1 inch would be needed to get an accurate reading.
Date published: 2020-09-14
Hi, What is the max temperature rating for the wire that connects the probe to the K-type connector? It looks like plastic shielding on the wire and I don't want to melt it.
Thank you for your inquiry.
The max temperature the wire can handle is 260C (500F)
Date published: 2019-10-21
Can these be attached to a 2.5mm jack for use with a wireless bbq style type thermometer?
Hi Schwonkhead,
If your thermometer accepts a type K thermocouple then possibly yes. You'll need to check the wireless thermometer input specifications.
Best regards
OMEGA
Date published: 2020-07-08
Can I get this with a 10' lead?
Thank you for your inquiry. Yes we can make these as long as 50' using the CUSTOMIZE button.
Date published: 2020-07-26
I am looking for 2 stainless steel temperature probes to go into a 55 gallon drum that’s height is 34 inches. I want to hook it to a controller to manage a heating blanket to maintain a temperature between 68 to 75°F. What Would you recommend
This would need to be reviewed with a Temperature Engineer due to the complexity so please send an inquiry to temp@omega.com.
Date published: 2020-07-28
can these probes be bent? will bending them effect the readings?
Hello and thank you for contacting Omega. Yes, we can confirm that these probes are bendable to 90 degrees and that the bend will not affect the readings. We suggest a bending radius of 0.33” or larger. Please contact our Tech Support if you have any further questions.
Date published: 2020-08-28
Am I able to install these into an exhaust stream with temperatures up to 1450 F without a thermowell?
Hi Nick. That should be no problem although the if you want the added protection a thermowell with a threaded bushing would work.
Date published: 2020-08-18
I am looking at a T-type immersion, 304 SS, 1/8" dia, grounded TC. But looks like it is giving me only 40" cable length option. On picking up a 120" or 240" length it gives error saying compatibility issues. Please advise
Thank you for your inquiry. Please use the 'Configure Now' for custom lengths.
Date published: 2021-03-03