Skip to search Skip to main content Skip to navigation

Bolt-On Thermocouple with SS Washer Housing

Bolt-On Washer Thermocouple Assemblies

5.0

(6)

Click and hold to zoom

Data Sheet (PDF)

C$38.40

Item# WTE-8-60

Volume discounts available

Volume Discount Schedule

Quantity	Price each
1-9	C$38.40
10-24	C$36.48
25-99	C$34.56
100-499	C$32.64
500-999	C$30.72
1000+	C$28.80

QTY

Added to Your Shopping Cart

In stock

Lead Time (If not in stock): 5 weeks

+ Add to Project List

Very Economically Priced
J, K, T, and E Thermocouple
New Rugged Design
For #6, #8, #10 and 1/4' Screw Sizes

View Specs

WTE-8-60 Model Options

View all models

Edit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.

*Highlighted options are not compatible. Please select a different combination.

Thermocouple Type

Process Temperature Range

Cable Insulation

Termination Connection Type

Cable Length

Additional Features

Mounting Style

Probe Diameter

Minimum Temperature Measurement

Features

Category

Sensor Application

Color Code Standard

Specs

Edit Model Options

A versatile thermocouple assembly that easily mounts to a variety of surfaces. Utilizable for a number of surface temperature measurement applications where fixed mounting is possible.

Model No. 300 mm (12") L	Model No. 600 mm (24") L	Model No. 900 mm (36") L	Model No. 1500 mm (60") L	Washer Hole Diameter mm (inches)	Nominal Screw Size
Model No. 300 mm (12") L	Model No. 600 mm (24") L	Model No. 900 mm (36") L	Model No. 1500 mm (60") L	Washer Hole Diameter mm (inches)	AMERICAN	METRIC
GLASS INSULATED
WT(*)-6-12	WT(*)-6-24	WT(*)-6-36	WT(*)-6-60	3.68 (0.145)	#6	M3.5
WT(*)-8-12	WT(*)-8-24	WT(*)-8-36	WT(*)-8-60	4.32 (0.170)	#8	M4
WT(*)-10-12	WT(*)-10-24	WT(*)-10-36	WT(*)-10-60	4.95 (0.195)	#10	M4.5
WT(*)-14-12	WT(*)-14-24	WT(*)-14-36	WT(*)-14-60	6.60 (0.260)	1/4 in	M6
PFA INSULATED
WT(*)-6-12-TT	WT(*)-6-24-TT	WT(*)-6-36-TT	WT(*)-6-60-TT	3.68 (0.145)	#6	M3.5
WT(*)-8-12-TT	WT(*)-8-24-TT	WT(*)-8-36-TT	WT(*)-8-60-TT	4.32 (0.170)	#8	M4
WT(*)-10-12-TT	WT(*)-10-24-TT	WT(*)-10-36-TT	WT(*)-10-60-TT	4.95 (0.195)	#10	M4.5
WT(*)-14-12-TT	WT(*)-14-24-TT	WT(*)-14-36-TT	WT(*)-14-60-TT	6.60 (0.260)	1/4 in	M6

*Specify calibration: J, K, T or E. Stripped leads are standard.

Washer Dimensions
#6 and #8 screw size: 22 L x 6.5 mm W (0.875 x 0.250")
#10 and 14" screw size: 25 L x 9 mm W (1 x 0.360")

All Models

In Stock Only

Reviews

Manuals & Downloads

Data Sheet (1)

WT_spec

Questions & Answers

Is there a min/max torque for these thermocouples? Are there any other boundary conditions to be aware of when attaching these?

Asked by: lbarret

Thank you for your inquiry lbarret. Please send an email to tech support at temp@omega.com.

Answered by: Application Engineer SP

Date published: 2022-01-13

Does the 0°F lower process limit apply to thermocouple types other than type J? (e.g. can a type T version of the 'WT' sensor accurately measure temperatures below 0°F?)

Asked by: KirkR

Thank you for your inquiry. We do not state an accuracy for SLE Wire-Made Products below 0°C (32°F). Can they measure below 0°C? The answer is YES, however, accuracy shows it is no longer linear. If you want an accuracy for a SLE Product we suggest that you get a CAL-4 Calibration Report at an additional cost for temperatures below 0°C.

Answered by: Application Engineer CB

Date published: 2023-03-01

Two Questions: 1. Where is the thermocouple measurement made? Can you cut off the bolt hole without affecting the performance? 2. Are these made in an un-bent configuration?

Asked by: bchynoweth

Thank you for the inquiry. The thermocouple tip ( sensing portion of the TC) is pressed within the washer. You will notice the small channel on the shoulder of the washer. You could cut off the bolt hole being careful not to cut in to the channel. We do not offer a flat version. Best regards OMEGA

Answered by: NorwalkAE_RS

Date published: 2020-04-23

Hello, Does this thermocouple UL listed/certified? If so, can you tell me the UL file No? Thanks,

Asked by: Thomson

Thank you for your inquiry Thomson. No, this thermocouple is not UL listed/certified.

Answered by: Application Engineer SP

Date published: 2022-10-20

What are the wire colors WTJ-6-36-TT

Asked by: theegg

Thank you for your inquiry! The WTJ-6-36-TT is a type J thermocouple so the wires will be red and white.

Answered by: Application Engineer JM

Date published: 2021-02-17

Are any of these t/c made with stranded wire? I need something that is flexible. If so, what is the Dynamic Bend Radius?

Asked by: Greg B

Hi Greg, These are all made with solid wire. Please use 3 x wire diameter for minimum bend radius. Thinner wire will hold up longer. You might consider the SA1-K or the SA1XL-K as alternate. Best regards OMEGA

Answered by: AENorwalk

Date published: 2020-04-09

Could you please inform resistance between wire red and white of thermocouple WTJ-6-12 ? We have to use it to refer of measuring voltage create from this part.

Asked by: Design Engineer Panyawad

Thank you for your inquiry. We believe the best assistance would come from speaking to us directly at 888-826-6342 ask for the Temperature Department Mon. – Fri. (HOURS 8:30AM - 5:30PM EST).

Answered by: Application Engineer CB

Date published: 2023-10-02

For the WTK14-60 washer housing, the spec shows the total length is 1" (25mm). But it seems there is a bend on the length and what's the actual length for the contact surface? Thx

Asked by: AlbertY01

Thank you for your inquiry. The length of the bend is approx. 0.45"

Answered by: Application Engineer MC

Date published: 2023-10-01