Appelez-nous au 1-888-826-6342
2-phase Biploar Step Motors with High Torque Models
Programmable Step Motor Indexer/Drive![Programmable Step Motor Indexer/Drive](https://assets.omega.com/images/motion-control/motors/stepper-motors/OMHT_Series_l.jpg?imwidth=450)
Remises de volume disponibles
Calendrier de remise sur volume
Quantité | Prix unitaire |
---|---|
1-9 | C$237.47 |
10-24 | C$225.60 |
25-49 | C$220.85 |
50-99 | C$211.35 |
100-199 | C$206.60 |
200+ | C$201.85 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- Bipolar step motors
- Sizes ranging from NEMA 11 to NEMA 34
- Holding torque from 15 oz-in to 1845 oz-in
- 200 full steps per revolution (1.8° per step)
OMHT23-600 Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Form Factor
Shaft Configuration
Holding Torque
Omega offers a robust line of 2-phase biploar high torque stepper motors ranging in frame size from NEMA 11 to NEMA 34. Most of our models are the high torque style, with holding torques up to 1845 oz-in.
All step motors conform to industry-standard NEMA mounting dimensions, and are offered with a range of well-featured, compatible drives and indexers. With the exception of our two smallest motors (OMHT11-013, OM5014-842), all of our high torque step motors are optimized for microstepping: they can achieve a stepping resolution of up to 51,200 steps/revolution (.007° per step) when operated by one of our microstepping drives.
Although it is not necessary, these motors can be fitted with one of our incremental encoders, which can aid in stall detection and prevention.
Important Note About Motor Current vs Drive Current:
When setting the drive current, you should multiply the stepper motor's nameplate current by 1.2. This provides the correct conversion from the motor's full-step nameplate rating to the drive's current setting. If the motor nameplate current is specified as 5 Amps, set the drive current to 6 Amps (5 x 1.2) to achieve full performance.
Most of the stepper motors are 8-lead motors, offering the flexibility of either series or parallel connection. The high torque motors should be series connected for best torque at low speeds, and parallel connected for best torque at higher speeds.
Motor Wiring --- Parallel Connection (8-lead motors):
Drive A+ = Orange + Black/White
Drive A- = Black + Orange/White
Drive B+ = Red + Yellow/White
Drive B- = Yellow + Red/White
Motor Wiring --- Series Connection (8-lead motors):
Drive A+ = Orange
Drive A- = Black
Drive B+ = Red
Drive B- = Yellow
Connect Orange/White to Black/White (not connected to drive)
Connect Red/White to Yellow/White (not connected to drive)
Motor Wiring (4-lead motors):
Drive A+ = Red
Drive A- = Blue
Drive B+ = Yellow
Drive B- = White
OPTIMAL DRIVE/MOTOR COMBINATIONS -- 'X' INDICATES PRIMARY MOTOR CHOICE
RECOMMENDED MOTORS
1Motor with 3m (10') shielded cable
2Guaranteed minimum holding torque; actual torque may be 5-10% greater
All step motors conform to industry-standard NEMA mounting dimensions, and are offered with a range of well-featured, compatible drives and indexers. With the exception of our two smallest motors (OMHT11-013, OM5014-842), all of our high torque step motors are optimized for microstepping: they can achieve a stepping resolution of up to 51,200 steps/revolution (.007° per step) when operated by one of our microstepping drives.
Although it is not necessary, these motors can be fitted with one of our incremental encoders, which can aid in stall detection and prevention.
Important Note About Motor Current vs Drive Current:
When setting the drive current, you should multiply the stepper motor's nameplate current by 1.2. This provides the correct conversion from the motor's full-step nameplate rating to the drive's current setting. If the motor nameplate current is specified as 5 Amps, set the drive current to 6 Amps (5 x 1.2) to achieve full performance.
Most of the stepper motors are 8-lead motors, offering the flexibility of either series or parallel connection. The high torque motors should be series connected for best torque at low speeds, and parallel connected for best torque at higher speeds.
Motor Wiring --- Parallel Connection (8-lead motors):
Drive A+ = Orange + Black/White
Drive A- = Black + Orange/White
Drive B+ = Red + Yellow/White
Drive B- = Yellow + Red/White
Motor Wiring --- Series Connection (8-lead motors):
Drive A+ = Orange
Drive A- = Black
Drive B+ = Red
Drive B- = Yellow
Connect Orange/White to Black/White (not connected to drive)
Connect Red/White to Yellow/White (not connected to drive)
Motor Wiring (4-lead motors):
Drive A+ = Red
Drive A- = Blue
Drive B+ = Yellow
Drive B- = White
OPTIMAL DRIVE/MOTOR COMBINATIONS -- 'X' INDICATES PRIMARY MOTOR CHOICE
Drive | ||||||||||||
MOTOR | 1240i | 2035 | 3540i | 3540M | 3540MO | Si3540 | STR2 | STR4 | STR8 | ST5-S/Si | ST10-S/Si | STAC6-S/Si |
OMHT11-013 | X | X | X | |||||||||
OM5014-842 | X | X | X | |||||||||
OMHT17-075 | X | X | X | X | X | X | X | X | ||||
OMHT17-275 | X | X | X | X | X | X | X | X | ||||
OMHT17-278 | X | X | X | X | X | X | X | X | ||||
OMHT23-393 | X | X | X | X | X | X | X | X | ||||
OMHT23-593 | X | X | X | X | X | X | X | X | ||||
OMHT23-397 | X | X | X | X | X | X | X | |||||
OMHT23-597 | X | X | X | X | X | X | X | |||||
OMHT23-400 | X | X | X | X | X | X | X | |||||
OMHT23-600 | X | X | X | X | X | X | X | |||||
OMHT23-603 | X | X | X | X | X | X | ||||||
OMHT24-100 | X | X | X | X | X | X | ||||||
OMHT24-105 | X | X | ||||||||||
OMHT24-108 | X | X | ||||||||||
OMHT34-504 | X | X | ||||||||||
OMHT34-485 | X | X | ||||||||||
OMHT34-505 | X | X | ||||||||||
OMHT34-486 | X | X | ||||||||||
OMHT34-506 | X | X | ||||||||||
OMHT34-487 | X | X | ||||||||||
OMHT23-550 | X | |||||||||||
OMHT34-488 | X | |||||||||||
OMHT34-490 | X |
RECOMMENDED MOTORS
MODEL NO. | MOTOR CONNECTION 1 = SERIES 2 = PARALLEL 3 = UNIPOLAR | MOTOR LENGTH mm (in) | HOLDING TORQUE2 (oz-in) | LEADS | STEP ANGLE (DEG) | VOLTS | AMPS | OHMS | MH | ROTOR INERTIA (oz-in2/ g-cm2) | MOTOR WEIGHT g (lb) |
OMHT11-013 | 2 | 48 (1.87) | 15 | 4 | 1.8 | 2.0 | 1.0 | 2.0 | 2.6 | 0.098/18 | 177 (0.39) |
OM5014-842 | 2 | 40 (1.57) | 26.0 | 4 | 1.8 | 4.8 | 1.0 | 4.3 | 5.5 | 0.109/20 | 213 (0.47) |
OMHT17-075 | 1 | 47 (1.85) | 62.8 | 8 | 1.8 | 5.7 | 0.85 | 6.6 | 12.0 | 0.37/68 | 331 (0.73) |
2 | 2.8 | 1.70 | 1.7 | 3.0 | |||||||
3 | 44.4 | 4.0 | 1.20 | 3.3 | 3.0 | ||||||
OMHT17-275 | 1 | 48 (1.90) | 62.3 | 8 | 1.8 | 5.7 | 0.85 | 6.6 | 10.0 | 0.44/82 | 357 (0.79) |
2 | 2.8 | 1.70 | 1.7 | 2.5 | |||||||
3 | 44.0 | 4.0 | 1.20 | 3.3 | 2.5 | ||||||
OMHT17-278 | 1 | 63 (2.47) | 113 | 8 | 1.8 | 6.4 | 1.0 | 6.4 | 12.0 | 0.66/121 | 357 (1.32) |
2 | 3.2 | 2.0 | 1.6 | 3.0 | |||||||
3 | 79.0 | 4.5 | 1.40 | 3.2 | 3.0 | ||||||
OMHT23-393 | 1 | 39 (1.54) | 76.6 | 8 | 1.8 | 7.4 | 0.71 | 10.4 | 21.6 | 0.66/120 | 454 (1.00) |
2 | 3.7 | 1.41 | 2.6 | 5.4 | |||||||
3 | 54.2 | 5.2 | 1.00 | 5.2 | 5.4 | ||||||
OMHT23-593 | 1 | 41 (1.61) | 79.3 | 8 | 1.8 | 7.4 | 0.71 | 10.4 | 26.1 | 0.73/135 | 417 (0.92) |
2 | 3.7 | 1.41 | 2.6 | 6.6 | |||||||
3 | 59.4 | 5.2 | 1.00 | 5.2 | 6.6 | ||||||
OMHT23-397 | 1 | 54 (2.13) | 177.0 | 8 | 1.8 | 5.1 | 1.41 | 3.6 | 10.0 | 1.64/300 | 699 (1.54) |
2 | 2.5 | 2.83 | 0.9 | 2.5 | |||||||
3 | 125.0 | 3.6 | 2.00 | 1.8 | 2.5 | ||||||
OMHT23-597 | 1 | 54 (2.13) | 177.0 | 8 | 1.8 | 5.1 | 1.41 | 3.6 | 10.8 | 1.42/260 | 599 (1.32) |
2 | 2.5 | 2.83 | 0.9 | 2.7 | |||||||
3 | 127.4 | 3.6 | 2.00 | 1.8 | 2.7 | ||||||
OMHT23-400 | 1 | 76 (2.99) | 264.0 | 8 | 1.8 | 6.4 | 1.41 | 4.5 | 14.4 | 2.62/480 | 998 (2.20) |
2 | 3.2 | 2.83 | 1.1 | 3.6 | |||||||
3 | 187.0 | 4.5 | 2.00 | 2.3 | 3.6 | ||||||
OMHT23-600 | 1 | 76 (2.99) | 264.8 | 8 | 1.8 | 6.4 | 1.41 | 4.5 | 15.6 | 2.51/460 | 998 (2.20) |
2 | 3.2 | 2.83 | 1.1 | 3.9 | |||||||
3 | 187.0 | 4.5 | 2.00 | 2.3 | 3.9 | ||||||
OMHT23-603 | 1 | 111 (4.37) | 354 | 8 | 1.8 | 5.0 | 2.5 | 2.0 | 8.8 | 4.02/735 | 1497 (3.30) |
2 | 2.5 | 5.0 | 0.5 | 2.2 | |||||||
3 | 264 | 3.5 | 3.5 | 1.0 | 2.2 | ||||||
OMHT23-5501 | 1 | 78 (3.05) | 255.0 | 8 | 1.8 | 6.3 | 1.41 | 4.5 | 15.2 | 2.62/480 | 998 (2.20) |
2 | 3.2 | 2.83 | 1.13 | 3.8 | |||||||
3 | 180.5 | 4.5 | 2.00 | 2.25 | 3.8 | ||||||
OMHT24-100 | 2 | 44 (1.73) | 123 | 4 | 1.8 | 2.0 | 2.8 | 0.73 | 1.6 | 1.42/260 | 599 (1.32) |
OMHT24-105 | 2 | 54 (2.13) | 177 | 4 | 1.8 | 1.7 | 4.0 | 0.43 | 1.1 | 2.46/450 | 830 (1.83) |
OMHT24-108 | 2 | 85 (3.35) | 354 | 4 | 1.8 | 2.6 | 4.0 | 0.65 | 2.4 | 4.91/900 | 1402 (3.09) |
OMHT34-504 | 1 | 66 (2.62) | 396 | 8 | 1.8 | 3.05 | 3.18 | 0.96 | 6.8 | 6.0/1100 | 1588 (3.5) |
2 | 1.51 | 6.3 | 0.24 | 1.7 | |||||||
3 | 297 | 2.16 | 4.5 | 0.48 | 1.7 | ||||||
OMHT34-485 | 1 | 79 (3.11) | 650 | 8 | 1.8 | 3.2 | 4.3 | 0.76 | 5.2 | 7.8/1400 | 2803 (6.18) |
2 | 1.6 | 8.6 | 0.19 | 1.3 | |||||||
3 | 455 | 2.26 | 6.0 | 0.38 | 1.3 | ||||||
OMHT34-505 | 1 | 96 (3.78) | 849 | 8 | 1.8 | 4.20 | 3.18 | 1.32 | 10.8 | 10.1/1850 | 2676 (5.9) |
2 | 2.08 | 6.3 | 0.33 | 2.7 | |||||||
3 | 608 | 2.97 | 4.5 | 0.66 | 2.7 | ||||||
OMHT34-486 | 1 | 118 (4.63) | 1200 | 8 | 1.8 | 4.4 | 4.1 | 1.08 | 8.8 | 14.6/2680 | 3810 (8.40) |
2 | 2.2 | 8.1 | 0.27 | 2.2 | |||||||
3 | 840 | 3.1 | 5.7 | 0.54 | 2.2 | ||||||
OMHT34-506 | 1 | 125 (4.94) | 1260 | 8 | 1.8 | 5.43 | 2.8 | 1.94 | 21.6 | 15.0/2750 | 3810 (8.4) |
2 | 2.74 | 5.6 | 0.49 | 5.4 | |||||||
3 | 906 | 3.88 | 4.0 | 0.97 | 5.4 | ||||||
OMHT34-487 | 1 | 156 (6.14) | 1845 | 8 | 1.8 | 4.8 | 4.5 | 1.08 | 9.6 | 21.9/4000 | 5398 (11.9) |
2 | 2.4 | 9.0 | 0.27 | 2.4 | |||||||
3 | 1290 | 3.4 | 6.3 | 0.54 | 2.4 | ||||||
OMHT34-4881 | 1 | 79 (3.11) | 650 | 8 | 1.8 | 3.2 | 4.3 | 1.6 | 5.2 | 7.8/1400 | 3629 (8.00) |
2 | 1.6 | 8.6 | 0.4 | 1.3 | |||||||
3 | 455 | 2.26 | 6.0 | 0.8 | 1.3 | ||||||
OMHT34-4901 | 1 | 156 (6.14) | 1845 | 8 | 1.8 | 4.5 | 4.8 | 1.7 | 9.6 | 21.9/4000 | 5398 (11.9) |
2 | 2.25 | 9.6 | 0.42 | 2.4 | |||||||
3 | 1290 | 3.2 | 6.8 | 0.85 | 2.4 |
2Guaranteed minimum holding torque; actual torque may be 5-10% greater
![loading all models](/_ui/responsive/common/images/spinner.gif)
![loading all reviews](/_ui/responsive/common/images/spinner.gif)
![loading all QA](/_ui/responsive/common/images/spinner.gif)
Does it can return position value to rs485 to my PLC as I used to with others controllers?
Hello Darli
They will not communicate directly via RS485, though you can connect it to a device that has rs485 protocol, such as one of our panel meters/controllers, which have RS485 communications installed on them
Date published: 2020-02-12
Could you please provide the torque vs speed chart of this motor
Please see page D-29 on this link: https://br.omega.com/omegaFiles/auto/pdf/ST_SERIES.pdf
Date published: 2020-03-13
Accessories