Your feedback matters, take a quick surveyWebsite feedback
Back To Top
Load More Items from this family (18) ...
DIN Rail Signal Conditioners
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Added to Your Shopping Cart
The DRST-DC measures unipolar or bipolar DC current and voltage signals. Passive/active current buffered output voltage. Additional programmer required.
| Product Number | Input Type | Input Class | Input Ranges | Output Type | Output Class | Display Type | Supply Voltage Type | Isolation | Programability |
|---|---|---|---|---|---|---|---|---|---|
|
|
mA, V
|
Process
|
±100 mA, ±300 Vdc
|
mA, V
|
Process
|
Programmer
|
AC/DC
|
2300 V
|
Display Programmer
|
The DRST-CM is a programming display for DRST-AC, DRST-DC, DRST-UN & DRST-UR. Supports Modbus over RS-485. Monitors process value on built in display.
| Product Number | Programability | Additional Feature |
|---|---|---|
|
|
Snap Front Mount
|
Programming Display for DRST-AC, DRST-DC, DRST-UN, DRST-UR
|
The TXDIN70 series provide two channel transmitters or isolators with 4-20 or 0-20 mA output. Programmable input types with TXDIN70-DISPLAY accessory (sold separately)
| Product Number | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programability |
|---|---|---|---|---|---|---|---|---|
|
|
TC, RTD, mV
|
Temperature
|
See Detail Specs
|
mA
|
Process
|
DC
|
2300 V
|
Display Programmer
|
|
|
TC, RTD, mV
|
Temperature
|
See Detail Specs
|
mA
|
Process
|
AC
|
2300 V
|
Display Programmer
|
The DRST-FR converts frequency/pulse inputs to a 4-20mA or 0-10V DC output. PNP/NPN output, relay output. Universal power supply. Configurable with TXUN-KIT device.
| Product Number | Input Type | Input Class | Input Ranges | Output Type | Output Class | Display Type | Supply Voltage Type | Isolation | Programability | Additional Feature |
|---|---|---|---|---|---|---|---|---|---|---|
|
|
Frequency
|
Frequency
|
0 to 20 KHz
|
mA, V
|
Process
|
None
|
AC/DC
|
3750 V
|
USB Communication Kit
|
Relay Outputs
|
The LDX-D is a DIN rail mount AC LVDT transducer that operates on 10-30Vdc power with selectable process outputs. Adjustable signal polarity, span, and offset.
| Product Number | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Programability |
|---|---|---|---|---|---|---|---|
|
|
AC Voltage
|
AC Voltage
|
AC LVDT Transducer
|
mA, V
|
Process
|
DC
|
Trim Pot
|
The DMD4059 Series converts wheatstone strain bridge sensors, pressure transducers, or load cell signals into process current or voltage. Offered with AC or DC Power.
| Product Number | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programability | Additional Feature |
|---|---|---|---|---|---|---|---|---|---|
|
|
mV
|
Bridge, strain, mV
|
0 to 400 mV dc
|
mA, V
|
Process
|
AC
|
1200 V
|
Trim Pot/Switch
|
Adjustable Excitation
|
|
|
mV
|
Bridge, strain, mV
|
0 to 400 mV dc
|
mA, V
|
Process
|
DC
|
1200 V
|
Trim Pot/Switch
|
Adjustable Excitation
|
| Product Number | Input Type | Input Ranges | Output Type | Display Type | Supply Voltage Type | Isolation | Programability | FM Approved | Additional Feature |
|---|---|---|---|---|---|---|---|---|---|
|
|
TC, RTD, Resistance, Pot, mA, V, NTC
|
See Detail Specs
|
mA, V
|
None
|
AC/DC
|
2300 V
|
Pushbutton
|
No
|
Universal
|
The DRST-BG is a load cell & strain gage amplifier that converts mV to current or voltage. Front panel programmable LED display | Calibration of input span, external taring.
| Product Number | Input Type | Input Class | Input Ranges | Output Type | Output Class | Display Type | Supply Voltage Type | Isolation | Programability |
|---|---|---|---|---|---|---|---|---|---|
|
|
mV
|
Bridge, strain, mV
|
-40 to 100 mV dc
|
mA
|
Process
|
LED
|
DC
|
None
|
Pushbutton
|
The DRSL-LPI Series Conditioners are 1 or 2 channel analog input loop powered isolators. 1:1 signal ratio, low input voltage drop, slim housing.
| Product Number | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programability | Additional Feature |
|---|---|---|---|---|---|---|---|---|---|
|
|
mA
|
Process
|
0 to 20 mA
|
mA
|
Process
|
Loop
|
300 V
|
Switch
|
2-Channel
|
|
|
mA
|
Process
|
0 to 20 mA
|
mA
|
Process
|
Loop
|
300 V
|
Switch
|
1-Channel
|
CCT DIN rail conditioners that accept various input signals, such as voltage and current, frequency, temperature (TC and RTD), and provide 0/4 to 20 mA, or 0 to 10 Vdc.
| Product Number | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programability | Additional Feature |
|---|---|---|---|---|---|---|---|---|---|
|
|
AC Voltage
|
AC Voltage
|
0 to 100 Vac
|
mA, V
|
Process
|
AC
|
2000 V
|
Trim Pot/Jumpers
|
Not Applicable
|
|
|
mA, V
|
Process
|
0 to 50 mA dc, 18 Vdc max
|
mA, V
|
Process
|
Loop
|
2000 V
|
Trim Pot/Jumpers
|
Not Applicable
|
|
|
DC Current
|
0 to 5 mA, 0 to 50 mA
|
mA, V
|
AC
|
2000 V
|
Trim Pot/Jumpers
|
|||
|
|
V
|
0 to 0.1 Vdc, 0 to 1 Vdc, 0 to 10 Vdc, 0 to 100 Vdc, 0 to 650 Vdc
|
mA, V
|
AC
|
2000 V
|
Trim Pot/Jumpers
|
|||
|
|
AC Voltage
|
AC Voltage
|
0 to 1 Vac
|
mA, V
|
Process
|
AC
|
2000 V
|
Trim Pot/Jumpers
|
Not Applicable
|
The LCKD series are Omega's smallest load cells. They are temperature compensated, with ±0.25% linearity and 2mv/V output in capacities from 2.2 lbf to 1,000 lbf.
| Product Number | Input Type | Input Ranges | Output Type | Display Type | Supply Voltage Type | Isolation | Programmability | Additional Feature | FM Approved |
|---|---|---|---|---|---|---|---|---|---|
|
|
AC or DC Voltage, Current, or Frequency
|
50 mVAC up to 600 VAC
|
mA, V
|
Front Panel
|
18 to 256V ac/dc isolated
|
3000 V
|
Pushbutton
|
Universal
|
No
|
|
|
Frequency
|
0/1 Hz up to 0/1 MHz.
|
mA, V
|
Front Panel
|
18 to 265V ac/dc isolated
|
3000 V
|
Pushbutton
|
Universal
|
No
|
|
|
Strain/Bridge
|
0/5 mV up to 0/80mV
|
mA, V
|
Front Panel
|
18 to 256V ac/dc isolated
|
3000 V
|
Pushbutton
|
Universal
|
No
|
|
|
TC, RTD, Resistance, Pot, mA, V, NTC
|
See Detail Specs
|
mA, V
|
Front Panel
|
18 to 256V ac/dc isolated
|
3000 V
|
Pushbutton
|
Universal
|
No
|
The DRG-SC Series Conditioners have models with TC, RTD, Pot, Freq., AC/DC Voltage/Current, Strain/Bridge inputs and field configurable outputs from 0-5V, 0-10V, 0-20mA.
| Product Number | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programability |
|---|---|---|---|---|---|---|---|---|
|
|
RTD
|
Temperature
|
Pt 100, 500, 1K, Cu 10, 25, 100
|
mA, V
|
Process
|
DC
|
1800 V
|
Trim Pot/Switch
|
|
|
1
|
DC Voltage and Current (bipolar)
|
1
|
0 to 5V, 0 to 10V, 0 to 1 mA, 0 to 20 mA, 4 to 20 mA, +-5V, +-10 V
|
Din Rail
|
Good
|
||
The DIN Rail DMD4380 Series converts, amplifies, filters and optically isolates mA or V input signals to process current or voltage outputs. Loop powered w/ 1200V isolation.
| Product Number | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programability |
|---|---|---|---|---|---|---|---|---|
|
|
mA, V
|
Process
|
0 to 50 Vdc, 0 to 50 mA dc
|
mA, V
|
Process
|
AC
|
1200 V
|
Trim Pot/Switch
|
|
|
mA, V
|
Process
|
0 to 50 Vdc, 0 to 50 mA dc
|
mA, V
|
Process
|
DC
|
1200 V
|
Trim Pot/Switch
|
The DRSL-U is a universal input conditioner that accepts thermocouple, RTD, resistance, potentiometer, voltage or current input. Configured w/ DRSL-DISPLAY programmer.
| Product Number | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programmable | Additional Feature |
|---|---|---|---|---|---|---|---|---|---|
|
|
TC, RTD, Resistance, Pot, mA, V
|
Universal
|
See Detail Specs
|
mA, V
|
Process
|
DC
|
300 V
|
Requires DRSL-DISPLAY and DRSL-ADAPTOR
|
Universal
|
|
|
Not Applicable
|
Not Applicable
|
Not Applicable
|
Not Applicable
|
Not Applicable
|
None
|
None
|
Requires DRSL-DISPLAY and DRSL-ADAPTOR
|
Docking Station for Programming DRSL-U
|
TXDIN101 has thermocouple, RTD, and mV input with 4-20mA output. LED display, configuration TX69-CABLE sold separately required to program via PC.
| Product Number | Input Type | Input Ranges | Output Type | Display Type |
|---|---|---|---|---|
|
|
Universal (TC, RTD, mV)
|
See Detail Specs
|
mA
|
LED
|
The DRSL-RTD-LP is a 2, 3, or 4-wire PT100 RTD input conditioner. Output loop powered with high accuracy and slim housing. Pre-calibrated temp range DIP switch selected.
| Product Number | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programability |
|---|---|---|---|---|---|---|---|---|
|
|
RTD
|
Temperature
|
-200 to 850°C
|
mA
|
Process
|
Loop
|
None
|
Switch
|
DRA-ACT-4 Series DIN Rail Conditioners take a 4 wire AC Current/Voltage input and converts to 4-20mA output. AC Powered 115V or optional 230 V power.
| Product Number | Number of Inputs | Input Type | Input Ranges | Number of Output | Output Type | Response Time/Frequency | Form Factor | Accuracy Rating | Supply Voltage Type | Supply Voltage | Other Features |
|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
1
|
AC Voltage
|
0 to 150 Vac
|
1
|
4 to 20 mA
|
40 to 500 Hz
|
Din Rail
|
Better
|
AC
|
115 Volts
|
4-Wire AC Powered Design
|
|
|
AC Voltage
|
AC Voltage
|
0 to 400 Vac
|
mA
|
Process
|
AC
|
4000 V
|
Trim Pot
|
|||
The DRSL-SP2 is a repeater/splitter that isolates and converts 1 process input to 2 process outputs. DIP switch selectable ranges. Slim housing, high accuracy (0.05%)
| Product Number | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programability | Additional Feature |
|---|---|---|---|---|---|---|---|---|---|
|
|
mA, V
|
Process
|
0 to 20 mA, 0 to 10 Vdc
|
mA, V (x2)
|
Splitter
|
DC
|
300 V
|
Switch
|
Splitter
|
The DRSP-I Series are DC current splitters that take one 4-20mA input to two 4-20mA outputs w/ AC or DC power. Zero and span adjustments for each output, status LEDs.
| Product Number | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programability |
|---|---|---|---|---|---|---|---|---|
|
|
mA
|
Process
|
4 to 20 mA
|
mA (x2)
|
Splitter
|
AC
|
1200 V
|
Trim Pot
|
|
|
mA
|
Process
|
4 to 20 mA
|
mA (x2)
|
Splitter
|
DC
|
1200 V
|
Trim Pot
|
The DRA-RTT-2 is a DIN Rail loop powered signal conditioner with RTD input and 4-20mA linearized output. It has ± 0.1% accuracy and is field rangeable and low cost.
| Product Number | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programability |
|---|---|---|---|---|---|---|---|---|
|
|
RTD
|
Temperature
|
30 to 810°C
|
mA
|
Process
|
Loop
|
None
|
Trim Pot/Switch
|
DIN Rail Signal Conditioners
DIN Rail Signal Conditioners are essential for accurate data recording in a wide range of indus...
[+]