Your feedback matters, take a quick surveyWebsite feedback
DIN Rail Signal Conditioner for AC LVDT Transducers
DIN Rail Mount Signal Conditioners for AC LVDT Transducers
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-9 | C$1,115.60 |
| 10-24 | C$1,059.82 |
| 25-49 | C$1,037.51 |
| 50-99 | C$992.88 |
| 100+ | C$970.57 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
LDX-D Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Input Type
Input Class
Input Ranges
Output Type
Output Class
Supply Voltage Type
Programability
The LDX-D is a DC-powered conditioning module that can accept a wide range of analog inductive transducer types owing to its wide input gain. The signal polarity, span, and offset are adjustable. Output is selectable: ±10 Vdc voltage or ±20 mA current. The housing is a standard DIN rail enclosure that can clip directly to a 35 mm top-hat rail (TS35 EN50022). Transducers are connected via the screw terminals on the front of the LDX-D. Internal links and front-panel fine-adjustment potentiometers facilitate setup. By linking 2 LDX-D modules, users can perform some analog arithmetic functions, such as A + B, A B, (A + B)/2 and (A B)/2.
SPECIFICATIONS
Power Requirement: 10 to 30 Vdc
Supply Current:
Voltage Range: 140 mA @ 10 Vdc, 60 mA @ 30 Vdc
Current Range: 160 mA @ 10 Vdc, 70 mA @ 30 Vdc
Transducer Excitation:
Primary Voltage: 3 Vrms nominal
Primary Frequency (kHz): 5-, 10- or 13-link selectable
Signal Input:
Input Range: 55 to 5000 mV
Input Load Resistance: 100 kΩ
Signal Output:
Voltage Output: Up to ±10 Vdc
Current Output: Up to 20 mA into 150 Ω load
Output Ripple: <1 mVrms
Output Offset: Up to 100%
Temp Coefficient Gain: <0.01% FSO/°C
Temp Coefficient Offset: <0.01% FSO/°C
Warm-Up: 15 minutes recommended
Linearity: <0.1% FSO
Bandwidth (-3 dB): 500 Hz or 1 kHz, link selectable
ENVIRONMENTAL
Operating Temp: 0 to 60°C (32 to 140°F)
Storage Temp: -20 to 85°C (-4 to 185°F)
MECHANICAL
Transducer: Screw terminals
Power Supply: Screw terminals
Output Signal: Screw terminals
Weight: 120 g (4.2 oz)
Case Material: Green polyamide
SPECIFICATIONS
Power Requirement: 10 to 30 Vdc
Supply Current:
Voltage Range: 140 mA @ 10 Vdc, 60 mA @ 30 Vdc
Current Range: 160 mA @ 10 Vdc, 70 mA @ 30 Vdc
Transducer Excitation:
Primary Voltage: 3 Vrms nominal
Primary Frequency (kHz): 5-, 10- or 13-link selectable
Signal Input:
Input Range: 55 to 5000 mV
Input Load Resistance: 100 kΩ
Signal Output:
Voltage Output: Up to ±10 Vdc
Current Output: Up to 20 mA into 150 Ω load
Output Ripple: <1 mVrms
Output Offset: Up to 100%
Temp Coefficient Gain: <0.01% FSO/°C
Temp Coefficient Offset: <0.01% FSO/°C
Warm-Up: 15 minutes recommended
Linearity: <0.1% FSO
Bandwidth (-3 dB): 500 Hz or 1 kHz, link selectable
ENVIRONMENTAL
Operating Temp: 0 to 60°C (32 to 140°F)
Storage Temp: -20 to 85°C (-4 to 185°F)
MECHANICAL
Transducer: Screw terminals
Power Supply: Screw terminals
Output Signal: Screw terminals
Weight: 120 g (4.2 oz)
Case Material: Green polyamide
