Call us at 1-888-826-6342
Thermocouple Probes with Retractable Cable
General Purpose Thermocouple Probes With Miniature Plug Connector
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-9 | C$87.65 |
| 10-24 | C$83.27 |
| 25-99 | C$78.89 |
| 100-499 | C$74.50 |
| 500-999 | C$70.12 |
| 1000+ | C$65.74 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- Made from Special Limits of Error Wire
- Works Great with Handheld Instruments
- 6' Length Standard †
- 1/8' OD Stainless Steel Sheath
ETSS-HH Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Thermocouple Type
Process Temperature Max
Process Temperature Range
Probe Length
Category
Process Temperature Unit
Process Temperature Min
Sensor Application
Junction Type
Probe Diameter
Sheath Housing Material
Cable Insulation
Wire Gauge
Cable Length
Termination Connection Type
The molded miniature probe conveniently plugs directly into most handheld thermocouple meters. The color-coded, retractable cable will stretch from 12" to 48". The probe is ideal for use with handheld meters. The grounded junction probes are also suited for applications with benchtop meters and with oscillating machines. Available in calibration codes J, K, T and E.
View the Thermocouple Accuracy and Color Code charts
View the Thermocouple Accuracy and Color Code charts
Rated 5 out of
5
by
VentorBridge from
Great little TC probe
I've been developing a mini furnace for waste treatment and needed a quick read of temperatures it was reaching. Already had a TC-input thermometer, so just needed a probe that was rugged yet cheap enough to replace when (if) it burned out. This fit the need perfectly. Still going strong after half a dozen test firings.
Date published: 2017-08-26
Rated 5 out of
5
by
Anonymous from
Fast service and affordable
Useful and affordable. I needed for my handheld thermometers and came on time.
Date published: 2023-10-08
Rated 5 out of
5
by
Aiki from
Well made
Well built, sturdy and accurate. Just what I needed
Date published: 2018-03-29
Does this probe work with the Omega T/C Thermometer Model HH911T?
Thank you for your request. The KTSS-HH-12 is compatible with the HH911T.
Date published: 2019-08-30
Do the probes KTSS-HH-12 and TTSS-HH-12 are compatible with the HH509 ?
Thank you for connecting with Omega Engineering! Both part numbers KTSS-HH-12 and TTSS-HH-12 are compatible with the HH509 meter.
Date published: 2022-01-18
I'm trying to calibrate an Omega KTSS-HH K-type thermocouple probe and cannot find ANY accuracy or temperature range of use specifications for this probe. Can anyone at Omega provide this data?
The specification would be for a Type K Thermocouple with special limits of error per ASTM E230-ANSI MC 96.1. The accuracy is +/- 1.1 C or 0.4% of reading whichever is greater for the Temperature range of 0 to 1250C. Below 0 follows the Standard Limits of Error +/- 2.2 C or 0.75% of reading whichever is greater -200 to 0 C.
Date published: 2023-10-27
Is this compatible with the HH374 meter?
Thank you for your inquiry. The HH374 is compatible with the KTSS-HH only (Type K Thermocouple).
Date published: 2021-10-11
Is this probe compatible with 95% sulfuric acid heated to 130 degrees C?
No. This would need to be PFA-coated to work in this type of application. We do not offer PFA coating on this particular probe. Please contact our tech support at 1-800-872-9436 x 2209 for items which could be used. The probe(s) recommended would be "custom-made" with a minimum order required.
Date published: 2023-10-27
