Your feedback matters, take a quick surveyWebsite feedback
Pipe Plug RTD Probes with NPT Fitting and Lead Wire
RTD Pipe Plug Probe with NPT Fitting
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-4 | C$197.58 |
| 5-9 | C$187.70 |
| 10-24 | C$183.75 |
| 25-49 | C$175.85 |
| 50-99 | C$171.89 |
| 100+ | C$167.94 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
- High Pressure RTD Plug Sensor
- Available in Either Single or Dual RTD Sensors
- 72" Leads
- Available with 1/8NPT or 1/4NPT Mounting Threads
RTD-NPT-72-E-1/4-MTP Model Options
View all modelsEdit these specs to order a different model. Not all combinations are valid. Options compatible with previous selections will be in bold.
*Highlighted options are not compatible. Please select a different combination.
Process Temperature Max
Process Temperature Range
Process Connection Size
Cable Insulation
Cable Length
Termination Connection Type
Additional Feature
Category
Process Temperature Unit
Process Temperature Min
Sensor Application
Accuracy
Nominal Output
Number Of Wires
Sheath Material
Probe Diameter
Probe Length
RTD Single Sensor
This RTD Pt100 plug sensor is ideal for pressure vessel applications, pressurized containers and applications requiring a temperature sensor with an NPT mounting fitting. The single element design has a 1/4" diameter, 304 stainless steel probe that extends 1/2" from a 1/4"NPT mounting thread (optional 1/8"NPT mounting thread also available). Leads are 6' long, stranded #26 AWG nickel plated copper, PFA-insulated & jacketed with steel overbraid. Sensors are supplied with or without subminiature connectors. Pressure rating is 2500 psi., and the maximum temperature rating is 230°C (445°F).
RTD Dual Element Sensor
Dual RTD pipe plug probes come standard with flush sensing surfaces which minimize interference with moving parts, and 1/8"NPT mounting threads (optional 1/4"NPT mounting threads also available). The leads are 6' long, stranded #26AWG nickel plated copper, PFA insulated & jacketed cables with miniature connectors on each cable.
For complete product specifications see the Related Links section at the bottom of this page.
Can the Pipe Plug RTD Probes with NPT Fitting and Lead Wire come in custom lengths? What is the maximum length available?
Hi TobyV
Thank you for the inquiry. Custom length probe tip would be a special order so it is not practical. We have better options. Custom length lead wire can be made. For options please forward request to TEMP@OMEGA.COM.
Best regards
OMEGA
Date published: 2021-08-06
Is this RTD probe a good option for mixing vessels that will be under vacuum or would a thermocouple probe be a better option? I am concerned about the noise interference
The RTD type element probe would be best for noise immunity.
Date published: 2023-05-26
Can the transducer have a custom cable length? If so, what is the maximum available custom length?
Thank you for your inquiry. We sell these units in standard lengths of 120, 144, 200, 240, 252, 300 inches.
Date published: 2021-05-14
What is the maximum torque that can be applied to the RTD when installing it in a pressure vessel?
Hi DJM1,
Please forward this question to TEMP@DWYEROMEGA.COM.
Best regards
OMEGA
Date published: 2024-08-27
3-Prong Mini flat pin Connector for Thermocouple, RTD and 3-Wire Thermistor
C$8.58
0 In Stock
3-Prong Standard Size Round Pin Connector for Thermocouple, RTD and 3-Wire Thermistor
C$20.83
148 In Stock
Universal Temperature Connector-Transmitter, for RTD’s and Thermocouples
C$365.31
10 In Stock
