Appelez-nous au 1-888-826-6342
Panel Punches & Hole Saws for Temperature Connectors & DIN Meters
Panel Punches and Hole Saws for Thermocouple Connectors, DIN Size Controllers and Panel Meters
Remises de volume disponibles
Calendrier de remise sur volume
| Quantité | Prix unitaire |
|---|---|
| 1-9 | C$348.22 |
| 10-24 | C$330.81 |
| 25-49 | C$323.84 |
| 50-99 | C$309.92 |
| 100-199 | C$302.95 |
| 200+ | C$295.99 |
Veuillez contacter l'équipe technico-commerciale pour plus d’informations. le stock restant est toutefois disponible pour la vente.
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- DIN Size Panel Punches - DPP Series
• 1/32, 3/64, 1/16, 1/16 Square, 1/8 and 1/4 DIN Sizes
• Will Accept any Standard DIN Size Controllers and Panel Meters
• Will Cut a Clean Hole in up to 11 Gage (.090) Aluminum or up to 14 Gage (.075) Mild Steel - Rectangular Hole Punches - CP Series
• Rugged Industrial Design
• Square Corners
• Sizes to Mount All OMEGA Connectors
• Keyed Design Assures Alignment of Punch and Die
• Simply Drill a Pilot Hole and Then Punch Out the Exact Shape for Your Connector
• For panels up to 1.5mm (0.06") Thick - Round Hole Punches - RHS and RHP Series
• No Reaming or Filing
• 6.35 mm (1/4") or 9.52 (3/8") Pilot Hole
• Exact Size for RMJ and RSJ Connectors - Hole Saws - RS Series
• For Panels Over 3 mm (1/8")Thick
• Replaceable Blades
• 6.35 mm (1/4") Pilot Drill
CP-2 Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Pilot Hole Size
Cutout Height
Cutout Width
Tool Type
Diameter
Panel Punches
The panel punches are designed to create panel cut outs for OMEGA's family of thermocouple connectors. Three styles of panel punches are available. The CP series is for rectangular connectors, the RHS is for round connectors and the DPP are DIN sized panel punches.
RHS Hole Saws
Use your hand drill or drill press to fabricate jack panels with hole saws and around hole connectors. When the plate is too thick for punches, the saw is the solution. Complete assembly including saw, pilot drill, and mandril.
The panel punches are designed to create panel cut outs for OMEGA's family of thermocouple connectors. Three styles of panel punches are available. The CP series is for rectangular connectors, the RHS is for round connectors and the DPP are DIN sized panel punches.
RHS Hole Saws
Use your hand drill or drill press to fabricate jack panels with hole saws and around hole connectors. When the plate is too thick for punches, the saw is the solution. Complete assembly including saw, pilot drill, and mandril.
| Model Type | Model No. | Cutout Dimensions mm (in) | Designed For |
| Rectangular Connectors | CP-1 | 8.1 x 16.8 (.318 x .661) | SMP, SMPW |
| CP-2 | 9.5.1 x 16.7 (.375 x .656) | NMP | |
| CP-3 | 13.5 x 26.2 (.531 x 1.031) | OST, OGP NOX, OSTW | |
| CP-4 | 13.1 x 36.8 (.516 x 1.450) | OTP | |
| CP-5 | 16.1 x 30.4 (.635 x 1.195) | JP, SPJ, UPJ | |
| CP-6 | 16.1 x 41.4 (.635 x 1.630) | TPJ | |
| CP-7 | 16.4 x 26 (.646 x 1.024) | NHX | |
| CP-8 | 9.9 x 19.4 (.390 x .765) | SHX | |
| DIN Size Panel Punches | DPP-1 | 22.2 x 45 (.874 x 1.772) | 1/32 DIN |
| DPP-2 | 22.2 x 68 (.874 x 2.677) | 3/64 DIN | |
| DPP-3 | 22.2 x 92 (.874 x 3.622) | 1/16 DIN | |
| DPP-4 | 45 x 45 (1.772 x 1.772) | 1/16 DIN Square | |
| DPP-5 | 45 x 92 (1.772 x 3.622) | 1/8 DIN | |
| DPP-6 | 92 x 92 (3.622 x 3.622) | 1/4 DIN | |
| Round Connectors | RHS-43 | 43 (1 11/16) Diameter | CN77R3 & R5 Panel Meters |
| RHP-58 | 15.87 (.625) Diameter | RMJ | |
| RHP-78 | 22.22 (.875) Diameter | RSJ | |
| RHS-58 | 15.87 (.625) Diameter | RMJ | |
| RHS-78 | 22.22 (.875) Diameter | RSJ | |
| RS-58 | 15.87 (.625) Diameter | RMJ | |
| RS-78 | 22.22 (.875) Diameter | RSJ |
Rated 1 out of
5
by
KENF from
NEEDS IMPROVEMENT
THE PUNCH DID CUT A HOLE IN THE PANEL BUT IT BECAME WEDGED IN THE HOLE IT MADE. HAD TO REMOVE THE TOOL WITH A HAMMER. WILL NOT USE IT EVER AGAIN.
Date published: 2015-11-24
Rated 5 out of
5
by
cantwell_cleary from
Pretty good punch
I've used the 1/4 DIN punch for a few years now and am very happy with it. Excellent value and always a clean hole. It has worked on all the 14 ga panels I have tried so far. I have used it 20+ times. The threads are getting a little galled now but I just oil them then start tightening. Not sure if your supposed to, but I use a heavy duty air impact wrench, way easier and less twisting on the panel hinges or whatever part of the panel structure you are punching.
Date published: 2016-03-27
Rated 1 out of
5
by
RonG from
Poor durability
I bought the CP-5. I tried to punch a hole in a Hoffman 3 door standing enclosure and the punch broke on the first try. Apparently it is unable to handle that guage steel.
Date published: 2015-12-04
Rated 4 out of
5
by
Angelo Venzon from
Engineering/Fabrication
A better design would be to have no step on the outside surface of Die so it could pull all the way through the punched hole. Thus allowing easier removal of tool after punching hole.
Date published: 2023-04-23
Rated 5 out of
5
by
autobhj from
My best tool
Hello I have using the panle punch 45 x 45 mms and it works perfect
Date published: 2018-03-01
Rated 2 out of
5
by
Disappointed from
Broke on the First Use
The bolt used to pull the punch through the panel broke on the first use. It was being using on a 14awg mild steel panel and operated by hand.
I would have rated it 1 star, but Omega made it easy to return the product for a refund.
Date published: 2017-10-30
