Skip to search Skip to main content Skip to navigation

Appelez-nous au 1-888-826-6342

Nous avons remarqué que vous veniez de . Visitez votre site local pour connaître les offres régionales et l'assistance en direct.
Retour au sommet

Capteurs de couple

16 produits
Capteurs de couple statique

The TQ202 series are designed for flange or surface mounting. The shaft attachment has three equally spaced flat surfaces to assure non-slip mounting without the use of a key.

Shaft-to-Shaft Rotary Torque Sensors with Optional Encoder

The TQ513 series features heavy-duty silver slip rings that provide secure transmission of power and signal, and optional optical encoder for angle or speed measurement.

Rugged In-Line Rotary Torque Sensors with Integral Slip Ring Assembly

The TQ501 series is ideal for measuring torque in rotating shafts in a clockwise or counterclockwise directions. RPM sensors are an additional option that can be added.

Digital, Shaft-to-Shaft Rotary Torque Sensors with Optional Encoder

The TQ514 series has a digital signal that is converted and amplified to a ±5 Vdc analog signal for reduced noise and higher operating speed.

Flange Mounted Reaction Torque Sensors, 0 to 10 IN-LB to 0 to 100,000 IN-LB

The TQ101 series have flange mounts for easy installation and are ideal for monitoring torque in motor mounts, pump mounts, and machine mounts.

Reaction Torque Cells, Shaft Key Mount

The TQ402 series has a stainless steel case and heavy duty mounting for positive, non-slip connections and long term reliability in industrial environments.

Digital Torque Meters with Selectable Unit and RS232 Output

The HHTQ88 series are precision test instruments, with built-in 12 mm (0.5') chuck and chuck key, for automotive, automation, laboratories, and general industrial applications.

Reaction Torque Cells, Non-Rotating Shaft Mount, Low Torque Range

The TQ201 series are for inline use and have a heavy duty mounting for positive, non-slip connections that typically measure the starting torque of motors.

Reaction Torque Cells, Flange to Flange Mount

The TQ301 series torque sensors have heavy duty flange mounts and a stainless steel case for positive, non-slip connections and long term reliability in industrial environments.

Capteurs de couple statique 0-0,175 N-m à 0,28 N-m

The TQM202 metric series, with N-m units, are designed for flange or surface mounting. The shaft attachment has three equally spaced flat surfaces to assure non-slip mounting without the use of a key.

Socket Extension Connection for Rotary Torque Sensors

The TQ502A series is ideal for drive and socket systems in production fastening applications. They can be used for static or dynamic torque measurement.

Metric, Non-Rotating, Shaft Mount, Reaction Torque Sensors

The TQM201 metric series, with N-m units, are for inline use and have a heavy duty mounting for positive, non-slip connections that typically measure the starting torque of motors.

Reaction Torque Cells, Surface Key Mount

The TQ401 series features a stainless steel case for long term reliability in industrial environments and a shielded cable to reduce noise for precise measurements.

Socket Extension Reaction Torque Sensors with 1/4, 3/8, 1/2 and 3/4" Square Drives

The TQ103 series are compact and easily inserted between a socket and drive to monitor or verify bolt torque in both clockwise and counterclockwise directions.

Reaction Torque Cells, Heavy Duty Flange Mount

The TQ302 series has dual, heavy duty flange mounts for positive non-slip connections and a stainless steel case to withstand harsh industrial environments.

Combination Torque and Thrust Cells, Heavy Duty Construction

The TQ601 series does double duty as both a torque and thrust sensor and provides separate millivolt outputs for each. IP 65 protected for harsh environments.

Capteurs de couple

Torque sensors are essential components in many industrial and laboratory applications.

Omega Engineering offers a comprehensive selection of industrial-grade torque sensors and thrust cells. Our torque sensors feature a range of designs that are suitable for a variety of applications, including shaft-to-shaft rotary, non-rotating shaft mounts, digital, inline, flange-to-flange, metric flange-to-shaft, socket extension, and flange-to-shaft mount designs. They also feature optional encoders for angle or speed measurements, double-keyed ends, and socket extension connection for drive and socket systems.
Searching for your items
fr-CA
fr
Enregistrer la configuration