Appelez-nous au 1-888-826-6342
Universal 6/12 Channel ¼ DIN Panel Meter, Universal Input
Universal 6/12 Channel ¼ DIN Panel Meter
Remises de volume disponibles
Calendrier de remise sur volume
Quantité | Prix unitaire |
---|---|
1-4 | C$1 261.34 |
5-9 | C$1 198.27 |
10-24 | C$1 135.21 |
25-49 | C$1 072.14 |
50-99 | C$1 009.07 |
100+ | C$946.01 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- Universal TC, RTD and Process Inputs Firmware Selectable
- User Programmable Alarms Individually Settable per Channel
- Adjustable Scan Time: 400 mS Max Scan Rate per Channel
- 2 User Assignable Alarm Relays
DP606A Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Number of Inputs
Supply Voltage Type
Measurement Type
Input Type
Form Factor
Display Type
Max Sampling Rate
Alarm Output
Retransmission Output
Communications
The DP606A and DP612A Series is our newest line of affordable multi-channel panel meters. These models offer increased accuracy, wider operating temperatures and increased flexibility over the CN606 and CN612 models that they replace. The input, power and communications are also now isolated allowing for easier deployment and more reliable operation. The rugged extruded aluminum ¼ DIN case combines with the improved isolation to provide an extremely durable product.
These meters can read up to 12 sensors and include user selectable RS232 or RS485 communications using Modbus®. Two user configurable alarm relays are standard on all models. The universal input allows user selection between Thermocouple (9 Types), RTD 2-Wire, RTD 3-Wire, 4 to 20 mA and 1000 mV input options. These input selections are firmware selectable through the front panel buttons or Modbus serial commands. No dip switch setting changes are required.
Excellent fit for OEM instrumentation, automotive and aerospace test stand, factory automation, and power generation applications.
Note: While the inputs are universal and can be changed via firmware (no dip switches), all 6 or 12 inputs on a given unit must be set to the same type of input for operation.
Software: This multi-zone panel meter is most easily configured with Omega Sync, a software tool that enables users to configure device runtime parameters, view process values, and seamlessly export data. At the moment, Omega Sync supports the CN616A and DP606A/DP612A devices and we look to expand its reach to future products. For long-term data storage, our experts recommend using Omega Enterprise Gateway (OEG) that provides a powerful data historian, alarming, visualization and OPC-UA integration.
Specifications
Number of Zones: 61 or 12
1RTD 3 Wire 6 channels for all models
Display: 15 mm 7-seg LED
Display Time: 1 to 40s
Scan Time: 400 mS
Input Types:
TC: J, K, T, E, R, S, B, C, N
RTD: 2 or 3 wire
PT100 0.00385
CU10 0.00427
NI120 0.00672
Process: 4 to 20 mA, 0 to 1V
Resolution 1º, 1 mV, 0.01 mA
Accuracy: See Chart Below
A2D: 24-bit Sigma Delta
Communications:
RS232 and RS485 (User Selectable)
Up to 115.2k baud
Modbus Protocol (RTU)
Input Power:
AC Models: 120/240 Vac; 50/60 Hz
DC Models: 9 to 36 Vdc
3 watts maximum
Isolation per 1 Min
Power to Input:
AC Units: 2.3k Vac (3.2k Vdc)
DC Units: 1.5k Vdc
Power to Alarm Relay: 2.3k Vac (3.2k Vdc)
Power to Serial: 2.3k Vac (3.2k Vdc)
Input to Serial: 500 Vac (720 Vdc)
Alarm Relays:
AC Models:
240 Vac max
5A max load
DC Models:
36 Vdc max
3A max load
De-energizes on Alarm Latching or Non-Latching High, Low or Hi/Low
Operating Temp: -20 to 70ºC (-4 to 158ºF)
Storage Temp: -40 to 85ºC (-40 to 185ºF)
Panel Cutout: ¼ DIN 92 x 92 mm (3.6 x 3.6")
Dimensions: 95 H x 95 W x 135 Dia mm (3.7 x 3.7 x 5.3")
Min Rear Panel Depth: 140 mm (5.5")
Weight: 725 g (26 oz)
Approvals
ECCN: EAR99
Safety: 2014/35/EU
EMC: 2014/30/EU
RoHS: 2011/65/EU
UL File No.: E209855
UL / cUL Listed
These meters can read up to 12 sensors and include user selectable RS232 or RS485 communications using Modbus®. Two user configurable alarm relays are standard on all models. The universal input allows user selection between Thermocouple (9 Types), RTD 2-Wire, RTD 3-Wire, 4 to 20 mA and 1000 mV input options. These input selections are firmware selectable through the front panel buttons or Modbus serial commands. No dip switch setting changes are required.
Excellent fit for OEM instrumentation, automotive and aerospace test stand, factory automation, and power generation applications.
Note: While the inputs are universal and can be changed via firmware (no dip switches), all 6 or 12 inputs on a given unit must be set to the same type of input for operation.
Software: This multi-zone panel meter is most easily configured with Omega Sync, a software tool that enables users to configure device runtime parameters, view process values, and seamlessly export data. At the moment, Omega Sync supports the CN616A and DP606A/DP612A devices and we look to expand its reach to future products. For long-term data storage, our experts recommend using Omega Enterprise Gateway (OEG) that provides a powerful data historian, alarming, visualization and OPC-UA integration.
Specifications
Number of Zones: 61 or 12
1RTD 3 Wire 6 channels for all models
Display: 15 mm 7-seg LED
Display Time: 1 to 40s
Scan Time: 400 mS
Input Types:
TC: J, K, T, E, R, S, B, C, N
RTD: 2 or 3 wire
PT100 0.00385
CU10 0.00427
NI120 0.00672
Process: 4 to 20 mA, 0 to 1V
Resolution 1º, 1 mV, 0.01 mA
Accuracy: See Chart Below
A2D: 24-bit Sigma Delta
Communications:
RS232 and RS485 (User Selectable)
Up to 115.2k baud
Modbus Protocol (RTU)
Input Power:
AC Models: 120/240 Vac; 50/60 Hz
DC Models: 9 to 36 Vdc
3 watts maximum
Isolation per 1 Min
Power to Input:
AC Units: 2.3k Vac (3.2k Vdc)
DC Units: 1.5k Vdc
Power to Alarm Relay: 2.3k Vac (3.2k Vdc)
Power to Serial: 2.3k Vac (3.2k Vdc)
Input to Serial: 500 Vac (720 Vdc)
Alarm Relays:
AC Models:
240 Vac max
5A max load
DC Models:
36 Vdc max
3A max load
De-energizes on Alarm Latching or Non-Latching High, Low or Hi/Low
Operating Temp: -20 to 70ºC (-4 to 158ºF)
Storage Temp: -40 to 85ºC (-40 to 185ºF)
Panel Cutout: ¼ DIN 92 x 92 mm (3.6 x 3.6")
Dimensions: 95 H x 95 W x 135 Dia mm (3.7 x 3.7 x 5.3")
Min Rear Panel Depth: 140 mm (5.5")
Weight: 725 g (26 oz)
Approvals
ECCN: EAR99
Safety: 2014/35/EU
EMC: 2014/30/EU
RoHS: 2011/65/EU
UL File No.: E209855
UL / cUL Listed
Measurement Types and Temperature Ranges | Operating Temperature Range | ||||
---|---|---|---|---|---|
Input Type | Description | Range | "Accuracy (25ºC)" | "Accuracy (0 to 50ºC)" | "Accuracy (-20 to 70ºC)" |
Process | Process Voltage | 0 to 1000 mV | ±1 mV | ±1 mV | ±1 mV |
Process Current | 0 to 24.00 mA | ±10 µA | ±10 µA | ±10 µA | |
J Type T/C | J Iron-Constantan | -150 to 0°C | ±1.0°C | ±2.0°C | ±6.0°C |
0 to 1200°C | ±1.0°C | ±1.0°C | ±2.0°C | ||
K Type T/C | CHROMEGATM-ALOMEGATM | -150 to 0°C | ±1.0°C | ±2.0°C | ±5.0°C |
0 to -1372°C | ±1.0°C | ±1.0°C | ±2.0°C | ||
T Type T/C | Copper-Constantan | -150 to 0°C | ±1.0°C | ±2.0°C | ±7.0°C |
0 to 400°C | ±1.0°C | ±1.0°C | ±2.0°C | ||
E Type T/C | CHROMEGATM-Constantan | -150 to 0°C | ±1.0°C | ±2.0°C | ±5.0°C |
0 to 1000°C | ±1.0°C | ±1.0°C | ±2.0°C | ||
R Type T/C | Pt/13%Rh-Pt | -50 to 0°C | ±1.0°C | ±2.0°C | ±6.0°C |
0 to 1788°C | ±1.0°C | ±1.0°C | ±2.0°C | ||
S Type T/C | Pt/10%Rh-Pt | -50 to 0°C | ±1.0°C | ±2.0°C | ±5.0°C |
0 to1768°C | ±1.0°C | ±1.0°C | ±2.0°C | ||
B Type T/C | 30%Rh-Pt/6%Rh-Pt | 150 to 700°C | ±1.0°C | ±2.0°C | ±3.0°C |
700 to 1820°C | ±1.0°C | ±1.0°C | ±1.0°C | ||
C Type T/C | 5%Re-W/26%Re-W | 0 to 2320°C | ±1.0°C | ±1.0°C | ±3.0°C |
N Type T/C | Nicrosil-Nisil | -150 to 0ºC | ±1.0°C | ±2.0°C | ±5.0°C |
0 to 1300°C | ±1.0°C | ±1.0°C | ±2.0°C | ||
RTD 2/3 Wire | Pt, 0.00385, 100? | -200 to 850°C | ±1.0°C | ±1.0°C | ±1.0°C |
RTD 2/3 Wire | Cu, 0.00427, 10? | -200 to 260°C | ±1.0°C | ±1.0°C | ±1.0°C |
RTD 2/3 Wire | Ni, 0.00672, 120? | -80 to 260°C | ±1.0°C | ±1.0°C | ±1.0°C |


Rated 5 out of
5
by
jastew358 from
Universal 6/12 panel meter
This product is a great addition to our machine safety; easy to use and consistent
Date published: 2020-12-29
RoHS 2015/863 - Voir le certificat
Approuvé CE
UKCA
Listé UL cULus

I was hoping to connect the meter to a pc to log data in conjunction with the OEM software. Is this possible? If so, where could I find the wiring diagram for the serial connection? I've looked in the manual but cannot find any specifics for this wiring.
The 3 terminal connector marked serial is where you make your communication connection. Pin #1 code B is your Transmit (TX), pin #2 code A is your receive (RX) and pin #3 is the RTN connection. You can connect directly to your PC's Comm port or use a OM-CONV-USB and go into a USB input.
Date published: 2023-07-13
Are there any examples of how to communicate with modbus using Labview? (i.e. an instruction to read temperature through visa)
Thank you for the inquiry. We do not have labview examples unfortunately. But the modbus register assignments and details are given in the manual;
https://assets.omega.com/manuals/DP600A_Manual.zip
Best regards
OMEGA
Date published: 2020-01-14
Should the controller automatically read multiple temperatures from multiple thermocouples after installation or is there a setting I am missing?
On the DP606A there should be one temperature displayed per active zone with a Thermocouple input. Function 2 sets which zones are active. If you have further questions contact the Temperature Engineering group at temp@omega.com.
Date published: 2022-09-22
I am trying to communicate between my PC and this controller through labview, but have trouble sending data. Are there any examples of modbus instructions using visa available? (i.e. how to read temperature or change between Fahrenheit/Celsius)
Thanks again 1anh21.
We do not have labview examples but modbus details are provided in main manual linked here;
https://assets.omega.com/manuals/DP600A_Manual.zip
Best regards
OMEGA
Date published: 2020-01-14
looking for DP612A Panel meter Operating and set up instruction <we have purchased last week ,
Thank you for your inquiry! You can find the manual in the "Manuals" tab under Product Specs.
Date published: 2021-07-08
Would like to know if there is a Modus register that can be used to stop the automatic temperature values loop and just show the temperature value of a specific sensor.
Hi guillermoe
Thank you for the inquiry. The necessary commands were not brought out to the modbus registers.
Best regards
OMEGA
Date published: 2021-09-28
Why even use RTD, the accuracy still ±1 degree C, RTD itself should be within ±0.5 degree C between 0 to 100 C, can the Controller maintain the temperature measurement within 0.5 degree C accuracy?
Thank you for your inquiry. The accuracy for the RTD Input is ±1°C. You still need to add the accuracy of the RTD itself to the overall accuracy.
Date published: 2022-05-16